Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Area
- Applications & Advantages
- Excellent Thermal Cycling Performance & Thermal Shock Resistance
- Resilient, Tough, Durable, High Elongation
- Low Embedment Stress on Electronics, Low Shrinkage
- Adhesion to Thermoplastics and Wire Insulation, Specific Adhesion to Aluminum
- Instruction for Use
MIX RATIO By WEIGHT VOLUME Tough-Seal 32 Part A 57 A 1 A Tough-Seal 32 Part B 100 B 2 B
Combine Part A and B and mix thoroughly, being careful to limit entrapped air during mixing. Scrape sides, walls and bottom of container. Pour material into part and cure. Bulk meter-mix dispensing machines and convenient cartridges provide air free mixing.
Properties
- Color
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Viscosity at 25°C | 4500 | cP | — |
Brookfield RVT at 20rpm | 5 | — | — |
Specific Gravity | 1.15 | — | — |
Density (lbs/gal) | 9.6 | — | — |
Elongation at Break | 450 | % | D638 |
Gel Time (100g) at 25°C (77°F) | 60 | minutes | — |
Hard Cure at 25°C (77°F) | Overnight | — | — |
Full Cure | 3 to 5 Days, Dependent on part size | — | D638 |
Accelerated Cure at Mild Heating 66 to 80°C (150-175°F) | Yes | — | D2240 |
Hardness | 40 | Shore A | D2240 |
Value | Units | Test Method / Conditions | |
Hardness vs Temperature -25°C (-13°F) | 48 | Shore A | D2240 |
Hardness vs Temperature -75°C (-103°F) | 84 | Shore A | D2240 |
Hardness vs Temperature 100°C (212°F) | 42 | Shore A | D2240 |
Hardness vs Temperature 120°C (248°F) | 41 | Shore A | D2240 |
Hardness vs Temperature 150°C (302°F) | 39 | Shore A | D2240 |
Hardness vs Temperature 25°C (77°F) | 40 | Shore A | D2240 |
Hardness vs Temperature 5°C (41°F) | 43 | Shore A | D2240 |
Hardness vs Temperature 50°C (122°F) | 41 | Shore A | D2240 |
Hardness vs Temperature 66°C (150°F) | 42 | Shore A | D2240 |
Hardness vs Temperature 80°C (176°F) | 42 | Shore A | D2240 |
Tensile Strength 25°C (77°F) | 850 | psi | D638 |
Elongation at Break 25°C (77°F) | 450 | % | D638 |
Linear Shrinkage (Upon Cure) 25°C (77°F) | max. 0.001 | in/in | D2256 |
Hardness vs RT Cure 1 Hour at 25°C (77°F) | 0 | Shore A | D2240 |
Hardness vs RT Cure 2 Hours at 25°C (77°F) | 0 | Shore A | D2240 |
Hardness vs RT Cure 4 Hours at 25°C (77°F) | 0 | Shore A | D2240 |
Hardness vs RT Cure 8 Hours at 25°C (77°F) | 0 | Shore A | D2240 |
Hardness vs RT Cure 12 Hours at 25°C (77°F) | 0 | Shore A | D2240 |
Hardness vs RT Cure 1 Day at 25°C (77°F) | 9 | Shore A | D2240 |
Hardness vs RT Cure 2 Days at 25°C (77°F) | 23 | Shore A | D2240 |
Hardness vs RT Cure 3 Days at 25°C (77°F) | 28 | Shore A | D2240 |
Hardness vs RT Cure 4 Days at 25°C (77°F) | 31 | Shore A | D2240 |
Hardness vs RT Cure 1 Week at 25°C (77°F) | 35 | Shore A | D2240 |
Hardness vs RT Cure 1 Month at 25°C (77°F) | 43 | Shore A | D2240 |
Value | Units | Test Method / Conditions | |
Heat Capacity,Cp 25°C (77°F) | 1.8 | J/g°K | E1461 |
Thermal Conductivity 25°C (77°F) | 0.2 | W/m°K | E1461 |
Coefficient of Thermal Expansion -65°C to 75°C | 200 | ppm/°C | E831 |
Coefficient of Thermal Expansion 75°C to 100°C | 200 | ppm/°C | E831 |
Coefficient of Thermal Expansion 100°C to 150°C | 200 | ppm/°C | E1545 |
Value | Units | Test Method / Conditions | |
Dielectric Strength at 25°C (77°F) | 350 | Volts/mil | D149 |
Volume Resistivity at 25°C (77°F) | 1.75 x 10 12 | Ω-cm | D257 |
Dielectric Constant at 25°C (77°F) 1 kHz | 5.25 | — | D150 |
Dielectric Constant at 25°C (77°F) 1 kHz | 4.85 | — | D150 |
Dielectric Constant at 25°C (77°F) 60 Hz | 5.45 | — | D150 |
Dissipation Factor at 25°C (77°F) 1 MHz | 0.025 | — | D150 |
Dissipation Factor at 25°C (77°F) 1 kHz | 0.021 | — | D150 |
Dissipation Factor at 25°C (77°F) 60 Hz | 0.043 | — | D150 |
Safety & Health
- Safety & Handling
Avoid all contact with skin, eyes, clothing and food. Wash thoroughly after handling.
Storage & Handling
- Shelf Life & Storage Info
Tough-Seal 32A (PC2032A) 12 Months from Date of Manufacture (-18°C to 35°C)
Tough-Seal 32B (PC2032B) 12 Months from Date of Manufacture (-18°C to 35°C)
Tough-Seal 32AB Cartridges 12 Months from Date of Shipment (-18°C to 35°C)