Products

Neutral Calcium Sulfonates Syncal™ N45H is dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process.

Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.

Jalpon™ 5300FD (Fast Dry) are high solids, lower VOC, moderately formulated rust preventive concentrates comprised of gelled calcium sulfonate and other components that yield a relatively tack-free coating. The high non-volatiles and lower viscosities of these products makes for easier handling compared to other high viscosity products.

Soluble Base 5100 is a formulated soluble oil emulsifier package specifically designed to emulsify naphthenic oils typically with aniline points of 155°F to 175°F. Its good hard water stability and rust inhibiting characteristics make this product an excellent choice for formulating soluble oils and semi-synthetic fluids used in machining, grinding, and forming operations. Soluble Base 5100 offers good rust inhibiting and emulsification properties at addition levels of 15 to 25% concentrations in oil.

Synbar™ N50HF is a first intent, neutral barium sulfonate designed to provide excellent demulsibility, detergency, and optimal non-staining rust protection. It is ideal for applications where superior rust and corrosion protection are needed. Synbar™ N50HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Syncal™ N50HF are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products offer excellent rust and corrosion inhibiting properties. The high polarity of Syncal™ N50HF impart excellent water displacing characteristics to a variety of formulated products.

Oleum Sulfonated Alkyl-Aryl Sulfonic Acid Sulfon™ 90 is a highly active sulfonic acid produced from oleum sulfonation of heavy alkylate bottoms (HAB).It is recommended as an intermediate for the manufacture of oil soluble metallic sulfonates for the automotive, metalworking, coatings and grease industries. The sulfonates produced from Sulfon™ 90 exhibit low odor and good rust and corrosion inhibiting characteristic. They are generally compatible with a variety of basestocks and impart good detergent and dispersant properties. Sulfon™ 90 is also readily convertible to gelled, crystalline calcium sulfonate.

PIBSI 1060A is a polyisobutylene succinicimide produced from polyisobutylene anhydride and a high molecular weight amine. This quality product is manufactured by thermal process to render a chlorine-free PIBSI.

Soluble Base 5700 is a versatile sulfonate and PIBSA derived soluble oil emulsifier package. It is designed to emulsify paraffinic and naphthenic oils, as well as the more difficult re-refined oils that are primarily paraffinic in composition. Soluble Base 5700 offers hard water stability and rust inhibiting characteristics. In addition, the PIBSA technology provides exceptional system cleanliness by preventing buildup of soap and sludge in the sumps. In turn, this limits microbial growth and thereby enhances corrosion protection and extends fluid life.

Overbased Magnesium Sulfonate Magsul™ OB9A is a cost efficient overbased magnesium sulfonate that lends detergent/dispersant, acid neutralizing, rust and corrosion inhibiting characteristics to a variety of lubricants. Magsul™ OB9A is a good choice for automotive, marine, diesel and stationary diesel lubricants. Nominal dosages ranging from 0.25% to 5.0% (Wt.) in the finished lubricant are effective. Magnesium sulfonates contribute lower ash to formulated products than the traditional overbased calcium sulfonate counterparts. This product exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Cruderes™ HV25 is a dark colored resin, derived from Pennsylvania and Appalachian Grade Crude refinery processes. CrudeResTM HV25 is higher in carbon and lower in sulfur and oxygen than other resins from naphthenic and asphaltic crudes.

K-Ox™ 9100 is a barium free non-staining, non-emulsifiable, alkali resistant, water displacing and water separating rust preventive concentrate which is soluble in aliphatic and aromatic solvents, naphthenic and paraffinic oils, and a selection of natural oils. K-Ox™ 9100 is particularly effective in displacing water from metal parts after machining operations or alkali cleaning. K-Ox™ 9100 will deposit an ultra-thin oily or waxy film, depending upon the diluent used. K-Ox™ 9100 will provide excellent humidity resistance and provide limited protection in salt environments and acid atmospheres.

K-Syn™ CI-100 is a high performance, water soluble corrosion inhibitor formulated to provide protection to cast iron and steel alloys. K-Syn™ CI-100 is designed for use in synthetic and low oil semi-synthetic metalworking fluids, water-based hydraulic fluids, and industrial cleaners. This amine carboxylate is inherently low foaming and has exceptional hard water stability. K-Syn™ CI-100 will deposit a thin oily-type film, upon the evaporation of water, which will also provide some short-term storage protection. K-Syn™ CI-100 contains no nitrates/nitrites, boron or secondary amines.

Synstock™ HV40X and HV100X polyalphaolefins are high viscosity API Group IV synthetic base stocks. They are decene derived, hydrogenated oligomers made by catalytic polymerization of linear alphaolefins. These Synstock™ products meet the requirements for technical white oil and are listed in the NSF White Book as Category Code H1. Benefits from choosing Synstock™ Group IV base oils over other options include good hydrolytic and thermal stability, very low pour points, and low volatility.

The Jalpon™ 1400 are stable emulsions of gelled calcium sulfonate in water, featuring low VOC and low odor. The products in this emulsion series are compatible with a wide range of waterborne and water dispersible resin systems.

Jalpon™ 1470 is a waterborne coating formulated with inhibitors, emulsifiers, surfactants, and other film forming and drying ingredients. When dry, Jalpon™ 1470 leaves a pale amber waxy film that offers a minimum of 500 hours salt spray protection (ASTM B117) and over 2000 hours humidity protection (ASTM D1748). Jalpon™ 1470 is an excellent low VOC automotive anticorrosion coating for OEM and aftermarket applications. It is intended for use as a final preservative coating for equipment and production parts prior to shipment or storage. Jalpon™ 1470 should be considered for any industrial application where solvent is not desirable.

K-Ox™ 3EB is a partial butyl ester of a petroleum derivative. It is a dark brown, soft, semi-solid compound. K-Ox™ 3EB is highly polar in nature making it an excellent wetting agent that provides lubricity to formulated products. K-Ox™ 3EB functions by being attracted to metal surfaces, thereby providing a multi-molecular film which lowers the coefficient of friction and, at the same time, affords mild rust protection.

Synbar™ OB70 (Overbased) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

Linear Dodecylbenzene Sulfonic Acid Sulfon™ 201 is a very highly active, biodegradable surfactant intermediate produced by the sulfur trioxide sulfonation of linear alkylbenzene (C10 – C13). It is recommended as a raw material for the manufacture of household, institutional, and industrial detergents. It is also a promoter for use in the manufacturing process of overbased calcium sulfonate grease and in the preparation of emulsifiers and wetting agents. Sulfon™ 201 can be neutralized with a wide range of inorganic bases and organic amines to produce a variety of sulfonates.

K-Amide™ X-1011 is a versatile, low-foaming rust and corrosion inhibitor for use in metalworking fluids, alkaline cleaners, and water-based quenching fluids. K-Amide™ X-1011 exhibits good compatibility with sulfonates, PIBSAs and other products as part of metalworking formulary. The non-tacky films of K-Amide™ X-1011 are easily removed with alkaline cleaners. K-Amide™ X-1011 is non-staining to yellow metals and can be used as a component of soluble oils as well as synthetic and semi-synthetic fluids. K-Amide™ X-1011 offers excellent cast iron chip test results at low concentrations.

K-Ox™ 9020 is a versatile rust and corrosion inhibitor containing oxygenated hydrocarbons, barium, and sodium sulfonates. K-Ox™ 9020 can be blended with oil or petroleum solvent and readily emulsified. This product demonstrates excellent humidity and corrosion protection properties. K-Ox ™ 9020 can be used as a general-purpose corrosion inhibitor additive for use in slushing oils, rust preventive lubricants, and metalworking fluids. It may also be used as an additive in the preparation of water base rust preventives.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

K-Ox™ 9080-55HF and 9080-70HF are economical calcium soaps of oxidized petrolatum used in rust preventive compounds. K-Ox™ 9080-55HF and 9080-70HF have been reduced with solvent to reach non-volatile contents of 55% and 70% respectively. They will deposit dark amber waxy films upon evaporation of the solvent. They are especially synergistic with gelled calcium sulfonate such as Kimes Technologies’ Jalpon™ products.

K-Ox™ 9065C is a calcium soap of oxygenated hydrocarbon. K-Ox™ 9065C can be blended with oils and petroleum solvents to produce films that are ultra-thin, non-staining, and offer excellent humidity resistance. K-Ox™ 9065C films offer rapid water displacement from metal surfaces. This product can be used with both ferrous and non-ferrous metals.

K-Ox™ W15L and W75L are synthetic fatty acids made from petroleum hydrocarbons. K-Ox™ W15L and W75L may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. They are not subject to bacterial degradation as are the natural fats. The esters derived from K-Ox™ W15L and W75L offer excellent lubricity and wetting characteristics to metalworking formulations. The higher acid number of K-Ox™ W75L offers more reactive sites for effective conversion to a variety soaps and esters.

K-Amide™ X-1040 is a special lard oil and DIPA based amide that is oil and/or water dispersible. K-Amide™ X-1040 is designed to offer lubricity, rust and corrosion protection, and reserve alkalinity in a variety of metalworking formulations. K-Amide™ X-1040 is low foaming and can be used as a secondary emulsifier. K-Amide™ X-1040 also improves the viscosity of water-based solutions.

K-Ox™ 9056 is a water displacing additive designed for formulating rust and corrosion inhibitors. K-Ox™ 9056 can be used to protect bright, ground, or highly polished steel surfaces. It is soluble in aliphatic solvents, low aromatic solvents, kerosene, and most oils. K-Ox™ 9056 imparts water displacing characteristics and offers rust and corrosion protection in high humidity, saltwater, and acid atmospheres. K-Ox™ 9056 can also be used in metalworking fluids and wax emulsions as a corrosion inhibitor when properly formulated with an amine such as triethanolamine.

Jalpon™ 1700HF is a concentrated, highly thixotropic gelled sulfonate in mineral spirits. It is designed to allow the easy formulation of solvent-based industrial coatings with a wide variety of raw materials. Jalpon™ 1700HF will offer superior corrosion protection and resistance to dripping, sag, and unwanted flow in finished coatings. Jalpon™ 1700HF is highly concentrated and should be formulated by blending with a variety of film formers such as oils, waxes, resins, and/or petrolatum products. Jalpon™ 1700HF can be used as an additive to improve rheological characteristics in paints, rust preventives, and coatings. Jalpon™ 1700HF also aids in the dispersion of pigments in highly formulated coatings.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Syncal™ OB408 is multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

Syncal™ OB308 is a specialty overbased calcium sulfonate that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricating oils, greases, rust preventives, and metalworking fluids. Syncal™ OB308 is a good choice for passenger car, heavy duty diesel, marine and stationary diesel engine oils where good detergency is required. Overbased calcium sulfonate grease manufactured from Syncal™ OB308 will convert readily and exhibit good gel strength retention properties. This product is compatible with most mineral base oils, white oils, and synthetic base stocks.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Synbar™ N50 (Neutral) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

Alpha Olefin Sulfonate Synsul™ AOS is an aqueous solution of sodium olefin sulfonates with a molecular weight of approximately 325. This non-ionic surfactant is highly effective as the foaming agent in many different personal care applications as well as fracturing fluids for subterranean formations. It also has utility as a foaming agent in enhanced oil recovery and is an efficient component for the clean-up of gas producing wells. Synsul™ AOS exhibits excellent heat stability and is compatible with a wide variety of other additives. It is especially suited for use in freshwater systems and is readily biodegradable.

Jalpon™ 1760LF is concentrated, thixotropic gelled sulfonates in mineral spirit carriers. Their high solids content allows for easy formulation of reduced VOC solvent-based industrial coatings. Jalpon™ 1760LF is compatible with a wide variety of raw materials and will offer superior corrosion protection and resistance to dripping and flow in finished coatings. Jalpon™ 1760LF should be further formulated by blending with other film formers such as oils, waxes or petrolatum to insure a continuous film and optimum performance. In addition to corrosion protection, they impart good rheology characteristics to paints, rust preventives, and coatings. Jalpon™ 1760LF can also be of value in the dispersion of pigments in highly formulated coatings.