Products

K-FLEX® UD-320-100 a 100% solids version of K-FLEX® UD-320 recommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. It provides hardness and exterior durability.

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® 148 is a lower viscosity version of K-FLEX® 188 designed for formulating higher solids content with good hardness and increased flexibility.

DISPARLON® 6700 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties particularly for high build epoxies.

DISPARLON® A603-20X is an alcohol-free pre-activated polyamide developed for isocyanate cured paint systems. it can be used on both the polyol and isocyante side of the formulation for anti-settling and anti-sag control.

DISPARLON® AQ-320 is a Solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with aluminum paste and pearlescent pigments in waterborne coating systems containing co-solvent.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

K-KAT® 670 is a unique zinc complex catalyst recommended for polysiloxane and STP 1K moisture cure adhesives, sealants, and coatings. K-KAT® 670 imparts excellent cure response in both methoxy and ethoxy silane systems.

NACURE® 2107 is an amine neutralized para-Toluenesulfonic (p-TSA) catalyst designed for fast cure response. It improves metal scratch resistance of acid catalyzed formulations.

K-KAT® XC-B221 is a a Bismuth Carboxylate catalyst designed for 2K and 1K blocked isocyanate urethane coatings. It provides similar properties to standard tin catalysts without the environmental drawbacks.

DISPARLON® P-466 is a strong silicone-free defoamer based on vinyl polymers specifically developed for use in roller and squeegee applied floor coatings.

K-STAY® 555 is a metal overbased sulfonate rheology control additive for pigmented solventborne applications. It is an easy to use, pourable liquid that is highly efficient in improving pigment suspension and sag control.

DISPARLON® AQ-7120 is designed as general purpose wetting & leveling agent based on acrylic-silicone polymers and easily dispersed into waterborne systems with excellent recoatability.

DISPARLON® A650-20X is a pre-activated polyamide thixotropic agent. When dispersed it is highly efficient in high build epoxy systems for anti-settling and anti-sag properties.

K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isopropanol manufactured with a high quality grade of acid to provide optimum properties.

NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. NACORR® 1652 provides excellent adhesion with outstanding performance in waterborne primers.

K-KAT® 5218 is an aluminum chelate complex catalyst that provides an excellent blend of both fast dry time and increased pot life when used in combination with 2,4 pentanedione. It is recommended for 2K polyurethanes, pultrusion and RIM applications.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® 1970 is a silicone-free, high molecular weight surface control agent. The product acts as a leveling agent with a defoaming effect in high polarity solventborne systems such as polyester bake applications, high build urethanes and high solids.

DISPARLON® P-467 is a strong silicone-free defoamer based on vinyl polymers specifically developed for use in roller and squeegee applied floor coatings and high solids systems.

NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) catalyst. It is similar to NACURE® 2500, except supplied at a lower pH. This allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures of 121°C (250°F) or higher.

DISPARLON® 1958 is based on a silicone-free, special nonionic, high molecular weight surface active agent. The product, having strong foam-breaking properties, acts as both a defoaming/leveling agent in low polarity solvent-based coatings. It is particularly effective as a defoamer in alkyd ambient-cure systems such as architectural paints.

NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid offering good stability and enhanced cure rate of amino crosslinked systems.

NACURE® XC-293 is based on proprietary acids designed to improve the adhesion of melamine crosslinked systems to metal. It is especially effective on aluminum substrates. It can be used as the sole catalyst for partially alkylated or high-NH type melamines or in conjunction with strong acid catalysts for fully alkylated melamine systems. XC-293 has also been found to improve the adhesion of thermoplastic and ambient cure coating formulations.

DISPARLON® EZ-777 is an easily dispersible paste of specially activated synthetic amide wax. It is easily incorporated into many solventborne systems to develop an exceptionally strong and long retained thixotropic structure.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

NACURE® 4167 is an amine neutralized phosphate catalyst. It is a weak acid catalyst that is particularly effective with polymeric or high imino melamines and phenolics.

K-SPERSE® 152 MS is a highly effective wetting and dispersing agent for all types of pigments. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in mineral spirits and is recommended for use in all solventborne coatings and inks.

DISPARLON® LHP-90 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

NACURE® 5225 is an amine neutralized Dodecylbenzenesulfonic acid (DDBSA) catalyst. Advantages over blocked p-TSA catalysts are viscosity stability and solubility.

NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid, offering excellent adhesion for solvent-based primers. It is catalytic in amino systems and has the best synergy with Zinc ACPs.

DISPARLON® A671-EZ is an easy to use, post addable pre-activated polyamide thixotropic agent in mineral spirits. Recommended for DIY and industrial stains for anti-settling and pigment orientation. It is a softer paste version of A670-20M.

K-KAT® XK-648 is a unique zinc-amine complex catalyst that is useful for catalysis of silane terminated polymers, particularly pigmented adhesives and coatings. It is also an effective catalyst for polyurea coatings with aromatic diamine curatives.

NACURE® 1323 is a very hydrophobic amine neutralized Dinonylnaphthalenesulfonic acid (DNNSA) catalyst. It has been formulated to provide maximum solubility, package stability and electrical resistivity.