NA-SUL® CA-770FG

1 of 30 products in this brand
NA-SUL® CA-770FG is a premium rust inhibitor for petroleum and synthetic lubricants, greases, and rust preventive fluids. It provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks.

Functions: Compatibilizer, Corrosion Inhibitor

End Uses: Circulating Oils, Compressor Oils, Gear Oils, Hydraulic Fluids

Features: Corrosion Resistant, Food Contact Acceptable, Good Thermal Stability, Hydrolytic Stability

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Fluids & Lubricants Functions
Chemical Composition

Neutral calcium alkylnaphthalenesulfonate in polyalphaolefin (PAO) fluid

Features & Benefits

Product Advantages
  • Compliance with the Food and Drug Administration Regulation 21 CFR 178.3570
  • Excellent rust inhibitor with outstanding demulsification properties
  • Excellent filterability, both dry and wet
  • Excellent thermal and hydrolytic stability
  • Excellent solubility in PAO and white oil base stocks

Applications & Uses

Use Level
0.05% - 1.0% (Circulating oils), 0.50% - 3.0% (Greases), 0.05% - 0.5% (Hydraulic fluids), 1.00% - 10.0% (Rust preventive fluids), 0.25% - 1.0% (Compressor oils), 0.10% - 1.0% (Gear oils)
Product Uses
  • NA-SUL® CA-770FG is designed for formulating food grade lubricants that require rust protection, demulsibility, filterability and water resistance at low treat levels.
  • Although it is approved for use up to 10% if required, NA-SUL® CA-770FG will pass the ASTM D 665B rust test in white mineral oil and PAO base oils at 0.10 - 0.20% additive level.
  • Properties

    Physical Form
    Appearance
    Clear brown viscous liquid
    Insoluble in
    Water
    Soluble in
    Petroleum, Most common solvents, Synthetic lubricant base stocks
    Typical Properties
    ValueUnitsTest Method / Conditions
    Viscosity (at 40°C)214cStASTM D 445, DIN 51 550
    Viscosity (at 100°C)26cStASTM D 445, DIN 51 550
    Density (at 15.6°C)0.91g/mLASTM D 4052
    Weight (at 25ºC)7.6lbs/gallon
    Flash Point165°CASTM D 92, DIN 51 376, Cleveland Open Cup (COC)
    Calcium Content1.65%
    Note

    It is recommended to verify the solubility in the base oils used and the compatibility with other additives.

    Regulatory & Compliance

    Certifications & Compliance
    Quality Standards

    Packaging & Availability

    Packaging Type
    Standard Packaging

    400 lbs (181 kg) closed head drum

    Storage & Handling

    Shelf Life
    3 Years
    Storage Conditions
  • Store in a cool, dry place away from any direct source of heat and moisture.
  • Maximum recommended storage temperature: 46°C (115°F)
  • Handling
    • Avoid all personal contact.
    • Observe good personal hygiene.