Products

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® UD-320-100 a 100% solids version of K-FLEX® UD-320 recommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. It provides hardness and exterior durability.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® 148 is a lower viscosity version of K-FLEX® 188 designed for formulating higher solids content with good hardness and increased flexibility.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® AQ-610 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions.

DEOGRIP® WPF is a soft feel additive and anti-slip agent for coating systems.

DISPARLON® OX-70 is a silicone-free, acrylic surface control additive that provided strong defoaming and leveling properties Particularly effective in high-viscosity paints which require a strong defoaming agent, such as epoxies, floor coatings and multi-component systems.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst. The polymeric moiety remains in the system and is capable of reacting with the crosslinking agent.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

NACURE® 1953 is an amine blocked DNNSA catalyst designed for application in higher bake amino crosslinked systems such as coil coatings and metal decorating.

DISPARLON® AQ-870 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure is formed to prevent sagging and pigment settling. AQ-870 can be easily added into systems with a dissolver.

DISPARLON® 4200-20 is an oxidized polyolefin based thixotropic agent designed to prevent pigment settling and hard caking, with little effect on viscosity. It works synergistically with other rheological additives.

NACURE® 5414 is a polymeric blocked sulfonic acid ester catalyst recommended for use with amino crosslinking resins.

DISPARLON® P-465 is a strong silicone-free defoamer based on vinyl polymers specifically developed for use in roller and squeegee applied floor coatings.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

DISPARLON® NS-30 is a patented blend of polyolefin with amide in xylene in paste form. This product effectively prevents sagging and settling of solvent-based coatings including those containing anti-corrosive pigments at high concentrations. NS-30 has little effect on viscosity, while still imparting strong anti-sagging/anti-settling properties.

DISPARLON® DA-325 is a solvent-free wetting and dispersing agent based on an amine salt of polyether phosphate, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments.

NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It has excellent performance in waterborne and solventborne systems and is highly recommended for low pH applications.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

NACURE® SC-52 is an amine neutralized aromatic sulfonic acid, high activity catalyst. It provides excellent balance of cure response and package stability.

DEOGRIP® MICRO A 2020 is matting, soft feel and texturing additive for water-based paints and varnishes.

DISPARLON® AQ-330 is a solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with metallic and pearlescent pigments in waterborne coating systems without co-solvents.

NACURE® XC-300 is a covalently blocked catalyst based on an alkylaromatic sulfonic acid. It is designed to offer improved stability in amino crosslinked primers that employ basic or ion exchange type anti-corrosive pigments.

NACURE® XC-235 is an acid phosphate catalyst supplied at 75% active in n-butanol. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

DISPARLON® 4200-10 is a flowable paste of polyolefin wax in xylene consisting of fine particles of 5 μ or less. This thixotropic agent can be post added to prevent pigment settling and hard-caking during storage or during coating application with little effect on viscosity.

NACURE® 1557 is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst specially formulated for reduced blistering in thicker films cured at high temperatures.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

DISPARLON® LHP-96 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.