Products

K-FLEX® UD-320-100 a 100% solids version of K-FLEX® UD-320 recommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. It provides hardness and exterior durability.

K-FLEX® 188 is a highly reactive, aliphatic polyester diol which is recommended for aminoplast or isocyanate crosslinked coatings, inks, sealants, elastomers, and adhesives. K-FLEX® 188 is the most versatile polyester diol in the K-FLEX® line.

K-FLEX® 148 is a lower viscosity version of K-FLEX® 188 designed for formulating higher solids content with good hardness and increased flexibility.

K-KAT® XK-672 is an effective catalyst for the production of urethanes. It meets all requirements of FDA 21 CFR 175.300 and is recommended for 1-component blocked NCO polyurethane systems for coil coating applications. Typical usage level 0.1 - 1.0% on total resin solids.

NACURE® 115 is a strong hydrophobic sulfonic acid catalyst designed for use in bake d amino crosslinked systems. This high active catalyst is designed to help improve direct-to-metal intercoat adhesion properties while maintaining excellent exterior durability.

DEOGRIP® MICRO S 1010 is a matting, softtouch and antislip agent.

NACURE® XC-293 is based on proprietary acids designed to improve the adhesion of melamine crosslinked systems to metal. It is especially effective on aluminum substrates. It can be used as the sole catalyst for partially alkylated or high-NH type melamines or in conjunction with strong acid catalysts for fully alkylated melamine systems. XC-293 has also been found to improve the adhesion of thermoplastic and ambient cure coating formulations.

DISPARLON® AQH-800 is a rheology control additive based on hybridized amide technology developed for waterborne systems. Can be post-added to prevent sagging and pigment settling while keeping viscosity low.

NACURE® 5225 is an amine neutralized Dodecylbenzenesulfonic acid (DDBSA) catalyst. Advantages over blocked p-TSA catalysts are viscosity stability and solubility.

NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) catalyst. It is similar to NACURE® 2500, except supplied at a lower pH. This allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures of 121°C (250°F) or higher.

NACURE® 1051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in 2-Butoxyethanol.

DEOGRIP® MICRO A 2010 is a matting, soft feel and antislip agent.

NACURE® SC-10 is a solution of para-Toluenesulfonic acid (p-TSA) in isopropanol manufactured with a highquality grade of acid to provide optimum properties.

DISPARLON® 6700 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties particularly for high build epoxies.

K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isopropanol manufactured with a high quality grade of acid to provide optimum properties.

K-STAY® 555 is a metal overbased sulfonate rheology control additive for pigmented solventborne applications. It is an easy to use, pourable liquid that is highly efficient in improving pigment suspension and sag control.

DISPARLON® AQ-7120 is designed as general purpose wetting & leveling agent based on acrylic-silicone polymers and easily dispersed into waterborne systems with excellent recoatability.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.

DISPARLON® L-1982N is a silicone-free acrylic polymer surface-control additive for leveling and wetting in medium polarity systems. Recommended for high solids alkyd coatings as well as epoxy and phenolic applications.

DISPARLON® AQ-7533N is a general purpose defoaming/anti-popping agent based on a blend of vinyl copolymer, surfactant and hydrocarbons for waterborne systems, designed to disperse uniformly in the paint.

DISPARLON® A671-EZ is an easy to use, post addable pre-activated polyamide thixotropic agent in mineral spirits. Recommended for DIY and industrial stains for anti-settling and pigment orientation. It is a softer paste version of A670-20M.

NACURE® 5925 is an amine neutralized DDBSA catalyst.

DISPARLON® 4200-10 is a flowable paste of polyolefin wax in xylene consisting of fine particles of 5 μ or less. This thixotropic agent can be post added to prevent pigment settling and hard-caking during storage or during coating application with little effect on viscosity.

NACURE® 1557 is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst specially formulated for reduced blistering in thicker films cured at high temperatures.

DISPARLON® NS-30 is a patented blend of polyolefin with amide in xylene in paste form. This product effectively prevents sagging and settling of solvent-based coatings including those containing anti-corrosive pigments at high concentrations. NS-30 has little effect on viscosity, while still imparting strong anti-sagging/anti-settling properties.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

NACURE® SC-52 is an amine neutralized aromatic sulfonic acid, high activity catalyst. It provides excellent balance of cure response and package stability.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

K-STAY® 511 is a liquid thixotrope for pigmented solventborne applications. It is a pourable liquid which makes for ease of use in production.

DISPARLON® AQ-607 is a polyamide based rheology control agent for waterborne systems. The 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions for best compatibility.

DISPARLON® KS-873N is a surface control agent based on anionic surfactant which prevents flocculations, anti-flood, and anti-float in solventborne systems.

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst. The polymeric moiety remains in the system and is capable of reacting with the crosslinking agent.