HIKOTACK® P-90S

1 of 13 products in this brand
Kolon Industries HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Chemical Family: Aromatics, Hydrocarbons, Polyolefins

Functions: Binder, Tackifier

Compatible Polymers & Resins: Ethylene Co-terpolymers

Physical Form: Pellets, Solid

Synonyms: Petrosin

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Name
CASE Ingredients Functions
Industrial Additives Functions
CAS No.
64742-16-1
EC No.
265-116-8

Applications & Uses

Compatible Polymers & Resins
Compatible Substrates & Surfaces
Adhesive & Sealant Type
Industrial Additives End Use

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Specific Gravity (20°C)1.07ASTM D 71
Color (Molten Resin, Ga.#)5.5ASTM D 1544
Color (50% Toluene Solution, HAZEN)max. 8ASTM D 1544
Softening Point (Ring & Ball)90-100°CASTM E 28
Softening Point (Ring & Ball)98.0°CASTM E 28
Bromine Number (Br)20.0cg/gASTM D 1159
Melt Viscosity BRF, at 160°C350.0cpsASTM D 3236
Melt Viscosity BRF, at 180°C125.0cps
Molecular Weight (GPC, Mw)1200.0Kg/moleG.P.C
Heat Stability at 200°C, 3hrs, Ga.#9.0ASTM D 1544
Acid Value0.04mg KOH/g

Regulatory & Compliance

Regulatory status

HIKOTACK® P-90S is in compliance with the requirements of the U.S FDA for following sections.

  • 175.105 Adhesives
  • 175.300 Resinous and polymeric coatings
  • 177.1210 Closures with sealing gaskets for food containers
  • 177.2600 Rubber articles intended for repeated use

Packaging & Availability

Packaging Type
Packaging and Storage

Packaging

Available both in big bags of 500kgs, 600kgs or 1,000kgs net weight and in multi-ply paper bags of 25kgs net weight.

Storage

Pelletized forms of resins may block or lump.It is recommended,

  • to store inside and keep cool condition (30℃ max / resin with softening point below 100℃ - 25℃ max)
  • not stacking pallets
  • to avoid sunlight

Especially, low softening point resins(below 100℃) has a higher possibility of blocking due to the nature of product. Therefore, we strongly recommend that keep storing in more strict conditions.

Storage & Handling

Shelf Life

The shelf life can be affected by storage and handling conditions. When products are stored in the original unopened container in an enclosed area and protected from contamination,moisture and extreme temperatures, the shelf life of HIKOTACK® is two years from the date of manufacture. Shelf life is a guide not an absolute value, and KOLON doesn't control end uses and storage conditions at customers. Therefore, the product should be reanalyzed for properties at the end of its shelf life to see if it meets specification for use.