Products

UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 119 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 119 polyamide resin was developed for release lacquers and has the lowest solution viscosity but fast solvent release.

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 138 polyamide resin is an alcohol soluble type resin of comparatively low viscosity. It has low odor, high gel and water resistance, together with excellent solvent release and blocking resistance. Its high ester tolerance permits addition of small proportions of nitrocellulose without loss of any of these properties.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

UNI-REZ 2532 (formerly UNI-REZ E3525) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2532 with the alkyd resin at temperatures between 210-230°C. UNI-REZ 2532 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy. UNI-REZ 2532 forms very strong and rigid thixotropic gels that are resistant to high levels of polar solvents.

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

UNI-REZ 2721 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2721 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2626 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2626 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2635 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2635 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2727 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2727 hot melt polyamide adhesive has excellent heat and chemical resistance.

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.

UNI-REZ 2672 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2672 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

UNI-REZ 2210 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 2210 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ 2641 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2641 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

UNI-REZ 2223 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2638 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2638 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

UNI-REZ™ 2502 is a thermoplastic polyamide resin. Used in high-gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

UNI-REZ 2248 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose, excellent gel resistance, and excellent moisture tolerance.

UNI-REZ 2221 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose and low viscosity, allowing for high heat resistance and high color strength.

UNI-REZ 2291 polyamide resin is a high molecular weight resin designed to provide laminating inks with a combination of excellent adhesion and viscosity stability. It has good alcohol solubility, low odor and the fast solvent release needed to obtain a low volatiles retain in laminated films.

UNI-REZ™ thermoplastic polyamide adhesives resins bond to a variety of substrates. Kraton’s leading technology position enables a tailored combination of strength, flexibility, environmental resistances, adhesion and open times.

UNI-REZ™ 2501 is a thermoplastic polyamide resin. Used in high gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

UNI-REZ 2228 polyamide resin is a high viscosity, alcohol soluble type resin for use in flexographic printing. Its high molecular weight and fast solvent release makes it ideal for high speed printing and when high chemical and/or abrasion resistance properties are desired.

UNI-REZ 2632 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2632 hot melt polyamide adhesive has excellent low temperature flexibility and adhesion to various plastic substrates. The low viscosity and moderate softening point allows for lower application temperatures when used with temperature sensitive substrates.

UNI-REZ 2226 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 106/1 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 106/1 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.