Kraton™ FG1901 G clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.
Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)
Chemical Family: Styrenic Block Copolymers, Styrenics, Styrene Copolymers
Additives Included: Impact Modifier
Processing Methods: Compounding
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Popular Kraton Products
View All Kraton ProductsProduct NameProduct FamiliesApplications
Kraton™ D1101 ET Styrenic Thermoplastic Elastomers (TPE-S)
Kraton™ D2122 DO-N Styrenic Thermoplastic Elastomers (TPE-S)
Kraton™ G1651 ES Styrenic Thermoplastic Elastomers (TPE-S)
TypeDocument Name
Technical Data Sheet
Kraton FG1901 G (2019) Technical Data Sheet
Kraton FG1901 G (2019) Technical Data Sheet
Technical Data SheetBrochure
Kraton™ General Roads Brochure
Kraton™ General Roads Brochure
BrochureSafety Data Sheet
Kraton™ FG Polymers (SEBS Maleated) Safety Data Sheet
Kraton™ FG Polymers (SEBS Maleated) Safety Data Sheet
Safety Data SheetSafety Data Sheet
Kraton FG1901 G Safety Data Sheet
Kraton FG1901 G Safety Data Sheet
Safety Data SheetKnowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Polymer Name
CASE Ingredients Functions
CAS No.
EC No.
Technologies
Kraton™ FG1901 G Features & Benefits
Materials Features
Applications & Uses
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Sales Specifications
Value | Units | Test Method / Conditions | |
Melt Index (230°C, 5 kg) | 14 to 28 | g/10 min | ASTM D1238 |
Melt Flow (230°C/5000g) | 14 to 28 | g/10 min | ASTM D1238 |
Maleic anhydride, Bound | 1.4 to 2.0 | % | BAM 1026 |
Maleic anhydride, Bound | 1.4 to 2.0 | %w | BAM 1026 |
Water | 500.0 | ppm | BAM 1024 |
Water | 500.0 | ppmw | BAM 1024 |
Typical Properties
Value | Units | Test Method / Conditions | |
Melt Index (230°C/5 kg) | 22.0 | gms/10min. | ASTM D 1238 |
Tensile Strength | 5000.0 | psi | ASTM D 412 |
Specific Gravity | 0.91 | g/cc | ASTM D 792 |
Styrene / Rubber ratio | 30/70 | - | n/a |
Hardness (10 sec) | 71.0 | Shore A | ASTM D 2240 |
Elongation at Break | 500.0 | % | ASTM D 412 |
Solution Viscosity | 1000.0 | cps | BAM 922 |
Packaging & Availability
Country Availability
Regional Availability
Packaging
- Kraton FG1901 G is packaged in sealed, foil-lined bags and typically does not require drying before melt process.
- However, if the bag is left open for an extended period of time, the product may absorb moisture and should be dried under vacuum at 80 degree C for a minimum of six hours before processing.
- KRATONTM and the Kraton logo are either trademarks or registered trademarks of Kraton Corporation, or its subsidiaries or affiliates, in one or more, but not all countries.
Kraton™ FG1901 G
Kraton