Kraton™ G1726 V

1 of 262 products in this brand
Kraton™ G1726 V clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from Taiwan in the physical form identified below. Kraton G1726 VS - is supplied as a dusted, dense pellet. Kraton G1726 V is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings.

Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)

Knowde Enhanced TDS

Identification & Functionality

CAS No.
66070-58-4
EC No.
613-880-1
Technologies

Applications & Uses

Plastics & Elastomers End Uses

Properties

Sales Specifications
ValueUnitsTest Method / Conditions
Polystyrene Content30.0 to 32.0%mKM 03
Solution Viscosity (Toluene, 25.0%w)140 to 220cPAGAM 922
Ash Content0.01 to 0.20%wAGAM 908
Melt Flow (190°C/2160g)15.0 to 23.0g/10min.ASTM D1238
Volatile Mattermax. 1.0%mKM 04
Total Extractablesmax. 1.0%mKM 05
Antioxidant Content0.03 to 0.10%mKM 08
Typical Properties
ValueUnitsTest Method / Conditions
Tensile Strength350.0psiASTM D-412
Diblock Content70.0n/a
Styrene / Rubber ratio30/70n/a
Hardness (10 sec)60.0Shore AASTM 2240
Elongation at Break200.0%ASTM D-412
Specific Gravity0.91g/ccASTM D 792

Packaging & Availability

Packaging

KRATONTM and the Kraton logo are either trademarks or registered trademarks of Kraton Corporation, or its subsidiaries or affiliates, in one or more, but not all countries.