Menzolit® CarbonSMC™ 1100

1 of 45 products in this brand
menzolit® CarbonSMC™ 1100 is a sheet molding compound based on vinylester resin, it’s Carbon fiber reinforced. In case of fire the product doesn’t melt, neither does it form droplets. The material is molded in heated steel molds on hydraulic presses. It is highly recommended to work with chrome plated tools. For molding and machining, dust proof electrical circuits have to be used (IP54). The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Functions: Molding Compound

Chemical Family: Vinyl Esters, Vinyls, Vinylics & Vinyl Derivatives

Reinforcement Material: Carbon Fibers

Processing Methods: Compression Molding

End Uses: Door Panels, Side Panels

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Polymer Name
Reinforcement Material
Composite Materials Functions

Features & Benefits

Labeling Claims

Applications & Uses

Composites End Use
Composites Processing Methods
Applications

A new product based on chopped carbon fibers for light weight structural body panels.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Continuous Service Temp170°CMenzolit
Density1.42g/cm³ISO 1183
Flex Modulus28GPaEN ISO 14125
Flexural Strength320MPaEN ISO 14125
Heat Distortion Tempmin. 200°CEN ISO 75-2
Impact Strength55kJ/m²EN ISO 179
Shrinkage-0.15%ISO 2577
Tensile Strength130MPaEN ISO 527-4
Water Absorptionmax. 0.5%ISO 62
Young’s Modulus30GPaEN ISO 527-4

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Form of Supply

menzolit® CarbonSMC™ 1100 is produced in a width of 500 mm.It is supplied on coil-piles holding about 40 kg. In any case a styrene barrier film wrapping is being used. Different packaging is possible after consulting our sales department. Available in black color.