Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Key Attributes
- Quick set time
- Low shrinkage
- Provides strong electrical insulation
- Protects against thermal and mechanical shocks
- Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons
- Comes in convenient dual cartridges, suitable for automated dispensing applications
Applications & Uses
- Applications
- Syringe or Cartridge
1. Twist and remove the cap from the cartridge or syringe. Do not discard cap.
2. Dispense a small amount to ensure even flow of both parts.
3. (Optional) Attach a static mixer.
- Dispense and discard 3 to 5 mL of the product to
- ensure a homogeneous mixture.4.After use, dispose of static mixer.
4. Without a static mixer, dispense material on a mixing surface or container, and thoroughly mix parts A and B together.
5. To stop the flow, pull back on the plunger.
6. Clean nozzle to prevent contamination and material buildup.
7. Replace the cap on the cartridge or syringe.
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
- Cure Instructions
Allow to cure at room temperature for 5 hours, or cure the adhesive in an oven for 15 min at 65 ˚C.
| Value | Units | Test Method / Conditions | |
| Functional Cure (at 22 ˚C) | 5 | Hours | — |
| Mix Ratio | 1:1 | Volume | — |
| Mix Ratio | 1:1 | Weight | — |
| Set Time | 8 to 10 | Minutes | — |
| Viscosity (at 25 ˚C)ᴮ | 12 | Pa·s | — |
| Viscosity (at 25 ˚C)ᴬ | 14 | Pa·s | — |
| Working Time | 3 to 5 | Minutes | — |
| Value | Units | Test Method / Conditions | |
| Breakdown Voltage | 23200 | V | — |
| Compressive Strength | 63 | N/mm2 | — |
| CTE After Tg | 175 | ppm/˚C | — |
| CTE Prior Tg | 76 | ppm/˚C | — |
| Dielectric Strength | 250 | V/mil | — |
| Glass Transition Temperature (Tg) | 64 | ˚C | — |
| Hardness Shore D | 82 | — | — |
| Lap Shear (Aluminum) | 5.9 | N/mm2 | — |
| Lap Shear (Stainless steel) | 4.9 | N/mm2 | — |
| Resistivity | 1.7 x 10¹⁴ | Ω·cm | — |
| Service Temperature Range | -40 to 150 | ˚C | — |
| Tensile Strength | 34 | N/mm2 | — |
| Value | Units | Test Method / Conditions | |
| Mixed Density | 1.14 | g/mL | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Type
- Dispensing Accessories
Consult the table below for accessory selection. See the Dispensing Accessories Application Guide for usage instructions. 8MT-50-FT should only be used with a pneumatic dispenser.
Cat. No. Dispensing Gun Static Mixer 8332-25ML N/A 8MT-25 8332-50ML 8DG-50-1-1 8MT-50 - Available Packaging
Cat. No. Packaging Net Vol. Net Wt. 8332-25ML Dual Syringe 25 mL 28.6 g 8332-50ML Dual Cartridge 46 mL 79.3 g
Storage & Handling
- Shelf Life
- 3 Years
- Storage and Handling
Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.