Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CAS No.
- 67-64-1, 1333-86-4
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
- Heat or solvent reactivatable adhesive
- Tough but flexible
- Heat, shock, and vibration resistant
- Low VOC
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Application Instructions
- The 8337 has excellent adhesion to metal, paper, cloth, foam, felt, rubber, and more. It is used to repair surrounds, speakers, and cones.
- Application Instructions
Follow the procedure below for best results.
Surface preparation
Clean oil, dust, water, solvents, and other contaminants. Let dry fully.To coat by brushing
1. Apply an even coat to both surfaces using a brush or spatula.
2. Carefully position surfaces to be bonded and apply pressure.
3. Allow at least 24 hours at room temperature for full strength.ATTENTION! Unwanted cement adhesive residues should be cleaned immediately with acetone.
- Compatibility
Adhesion— The 8337 has excellent adhesion to metal, paper, cloth, foam, felt, rubber, and more. It is not compatible with contaminants like water, oil, and greasy flux residues that may affect adhesion. If contamination is present on the substrate, clean the surface first. This adhesive contains solvents that may not be compatible with some materials. It is recommended to test compatibly prior to use.
Properties
- Odor
- Acetone, nail polish remover
- Physical Properties
- Typical Properties
- Temperature Properties
- Uncured Properties
- Note
Viscosity: Brookfield viscometer at 60 rpm with LVT spindle #4
Working Life: Based on thin film application and porous materials. For non-porous materials, time can take several hours.
Full Strength: time varies depending on thickness, temperature, humidity, and porosity of materials being bonded.
Storage Temperature Limits: If stored above stated temperature, it may have a permanent effect on viscosity.
Value | Units | Test Method / Conditions | |
Color | Black | — | — |
Density | 0.9 | g/mL | — |
Flash Point | -20 (-4) | °C (°F) | Tag Closed Cup |
Viscosity (at 25 °C, 77 °F) | 3500-5500 | cP | — |
Value | Units | Test Method / Conditions | |
Full Strength (at 22 °C, 72 °F) | max. 24 | Hours | — |
Working Life (at 22 °C, 72 °F) | max. 2 | Minutes | — |
Value | Units | Test Method / Conditions | |
Maximum Withstanding Temperature | 115 (240) | °C (°F) | — |
Storage Temperature Limits | 15 to 27 (60 to 80) | °C (°F) | — |
Value | Units | Test Method / Conditions | |
Solids Content | 31 ± 2 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- HMIS® RATING
-
Approximate HMIS and NFPA Risk Ratings Legend: 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
- Health, Safety, and Environmental Awareness
Please see the 8337-Liquid Safety Data Sheet (SDS) for more details on transportation, storage, handling and other security guidelines.
Environmental Impact: The 8337 formulation has a regulated volatile organic compound (VOC) content of 0% [0 g/L] by VOC-exemption.
Health and Safety: The liquid is flammable and should be kept away from flames and other ignition sources. As with most paint materials, avoid breathing in vapors or direct contact with the material and use in a well-ventilated area. It causes irritation and other symptoms like headaches, pain, as well as having long term exposure effects.
Wear safety glasses or goggles and disposable gloves to avoid exposures. Wash hands thoroughly after use. The cured coating presents no known hazard.
Packaging & Availability
- Packaging Type
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaging Weight 8337-55ML Bottle 55 mL (1.86 fl oz) 49.5 g (1.74 oz) 1 kg Case pack of 5 (2.2 lb Case pack of 5) Supporting Products
- Acetone: Cat. No. 434
Storage & Handling
- Shelf Life
- 5 Years