Products

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

KyronMAX® S-2240 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and impact resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh impact resistance: able to withstand high impact applications.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and impactEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength, stiffness, and impact resistance is neededHigh impact applications, such as aerospace, automotive and heavy equipment components.KyronMAX® S-2240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

KyronMAX® S-2212 is an advanced polymer material that combines the excellent strength, stiffness, and impact resistance of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and toughness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent impact resistance, toughness and good chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high toughness, such as gears, cogs, and sprockets for industrial machinery and equipmentKyronMAX® S-2212 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with the manufacturer for the exact content and its effect on the properties of the final material.

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.

Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.

Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.

DURABIO™ D6350 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by good flow and is suitable for injection mold.

DURABIO™ D5380 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for transparent sheets, consumer goods, E&E housing, and cosmetic containers. This grade is suitable for extrusion mold.

DURABIO™ DT7010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and high impact strength. It is suitable for injection mold.

DURABIO™ DT6010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high-impact strength. It is suitable for injection mold.

DURABIO™ D7342 (D7340-810) is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Altron™ LSG PC is a polymer made from polycarbonate (PC) and is available in the form of plates and rods. It boasts a wide range of features, including hydrocarbon resistance, ethylene oxide sterilizability, impact resistance, hot water resistance, biocompatibility, X-ray sterilizability, alkali resistance, excellent toughness, life science grade, no animal-derived components, gamma sterilizability, odorlessness, excellent dielectric properties, and acid resistance. Transparent in color, it finds applications in medical devices and assemblies, as well as in housings and enclosures, including those for medical device housings, analyzers, and bioreactor equipment.