Company logo

Products

Mitsubishi Chemical Group
Plastics
Product Families
Parts, Shapes & Films
Polymer Additives
Thermoset Resins
112 products found on Mitsubishi Chemical Group Mitsubishi Chemical Group products found for View all Plasticson Knowde
With TDS
With SDS
Hide Blends
Jer™ Yx7105 product card banner

Mitsubishi Chemical Group

jER™ YX7105

Polymer Name: Epoxy Resins & Compounds

Function: Impact Modifier, Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Plastics, Steel, Aluminum, Ceramic

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jERTM YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx8000d product card banner

Mitsubishi Chemical Group

jER™ YX8000D

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Plastics, Steel, Ceramic

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ 4250 product card banner

Mitsubishi Chemical Group

jER™ 4250

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Plasticizer, Binder, Adhesion Promoter, Impact Modifier

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Steel, Plastics, Ceramic

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications.   Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points  Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics  Printed electronics  Plastic processing    *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yl980 product card banner

Mitsubishi Chemical Group

jER™ YL980

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Steel, Plastics, Ceramic

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx7110 product card banner

Mitsubishi Chemical Group

jER™ YX7110

Polymer Name: Epoxy Resins & Compounds

Function: Impact Modifier, Binder, Coupling Agent, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jERTM YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.   Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx4000 product card banner

Mitsubishi Chemical Group

jER™ YX4000

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol   Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption  Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx8040 product card banner

Mitsubishi Chemical Group

jER™ YX8040

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Coupling Agent, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Labeling Claims: High Purity

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2001 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2001

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Recycled Plastics, Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S-2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications.FeaturesCan be used with recycled plasticsGood weather stabilityLow temperature impact resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx8800 product card banner

Mitsubishi Chemical Group

jER™ YX8800

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Flame Retardant, Binder, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic

jER™ YX8800 is an anthracene-type epoxy resin with significantly low melt viscosity, high Tg and low-CTE. It can be used for electrical and electronic applications, carbon fiber reinforced polymers (CFRP) and other applications that require flame retardancy. jERTM YX8800 is an adduct formed from the reaction of epichlorohydrin and 1,4-dihydro-9,10-anthracenediol.   Benefits High flame retardancy Well-balanced mechanical properies High electrical reliability  Features Abrasion, heat and water resistance Electrical insulation Good thermal stability High glass tansition temperature Low CLTE Significantly low melt viscosity (melting point: 107°C) Low chroline content Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials. Powder coatings Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ 1256 product card banner

Mitsubishi Chemical Group

jER™ 1256

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Plasticizer, Binder, Adhesion Promoter, Impact Modifier

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Plastics, Steel, Ceramic

jERTM 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yx7400n product card banner

Mitsubishi Chemical Group

jER™ YX7400N

Polymer Name: Epoxy Resins & Compounds

Function: Impact Modifier, Binder, Coupling Agent, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ Yl983u product card banner

Mitsubishi Chemical Group

jER™ YL983U

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Bisphenol Epoxy Resins, Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Fibers & Fabrics, Steel, Plastics, Ceramic

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Good elastic recovery  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ W 300a product card banner

Mitsubishi Chemical Group

METABLEN™ W 300A

Function: Impact Modifier

Compatible Polymers & Resins: Polyvinyl Chloride (PVC)

Processing Methods: Extrusion, Injection Molding

End Uses: Roofing Membranes, Vinyl Sheets, Film

METABLEN™ W-300A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for transparent polyvinyl chloride (PVC) in corrugated sheet and film.FeaturesHigh level of elasticity Excellent transparency propertiesGood impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2200 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2200

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN S-2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ L 1000 product card banner

Mitsubishi Chemical Group

METABLEN™ L 1000

Function: Processing Aid, Lubricant (External)

Compatible Polymers & Resins: Polyethylenes (PE), Polyvinyl Chloride (PVC), Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Thermoplastic Polyurethane (TPU), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polystyrenes (PS), Polypropylenes (PP), Polycarbonates (PC)

Processing Methods: Extrusion, Blow Molding, Calendering

METABLEN™ L-1000 is an acrylic external lubricant that achieves excellent metal release for PVC, TPU and polyolefins in calendering, injection molding, blow molding and extrusion applications. BenefitsDelayed polyvinyl chloride (PVC) fusionDeposit preventionImproved productivityPrevents tack and bleeding of additivesDelivers shiny and smooth appearanceReduces deposits around die and adhesion in die or cylinder*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2030 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2030

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC)

Processing Methods: Injection Molding

End Uses: Automotive Applications, Consumer Applications, Electrical/Electronic Applications, Aerospace Applications

METABLEN™ S-2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ A 3000 product card banner

Mitsubishi Chemical Group

METABLEN™ A 3000

Function: Processing Aid

Chemical Family: Acrylics, Acrylates & Methacrylates, Fluoropolymers

Compatible Polymers & Resins: Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Polyesters, Polycarbonates (PC), Polyethylenes (PE), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Polypropylenes (PP), Poly(Methyl Methacrylate) (PMMA)

Processing Methods: Profile Extrusion, Extrusion, Calendering, Machining, Structural Foam Molding, Blow Molding

End Uses: Automotive Interior Parts, Wires, Electrical/Electronic Applications, Cables, Profiles, Office Automation Equipment, Consumer Applications

METABLEN™ A-3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2100 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2100

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S-2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ A 3750 product card banner

Mitsubishi Chemical Group

METABLEN™ A 3750

Function: Anti-Drip Agent

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polyethylenes (PE), Polyesters, Polycarbonates (PC), Polyamides, Polystyrenes (PS), Polyvinyl Chloride (PVC)

Processing Methods: Blow Molding, Structural Foam Molding, Vacuum Casting, Extrusion, Compounding, Injection Molding, Profile Extrusion

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-dripping Easy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S X-006 product card banner

Mitsubishi Chemical Group

METABLEN™ S X-006

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Acrylonitrile Styrene Acrylate (ASA), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides colorability, heat-aging resistance and impact strength. It is used for polycarbonates polycarbonate/acrylonitrile butadiene styrene (PC/ABS) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S X-005 product card banner

Mitsubishi Chemical Group

METABLEN™ S X-005

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polyethylenes (PE), Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ SX-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Jer™ 1750 product card banner

Mitsubishi Chemical Group

jER™ 1750

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Coupling Agent, Adhesion Promoter

Chemical Family: Bisphenol Epoxy Resins, Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2006 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2006

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ S-2006 is a silicone-acrylic-based rubber impact modifier with high-impact strength at low temperatures and strong hydrolysis resistance. It is used for a variety of plastics in consumer goods and electric and electronics applications.FeaturesGood weather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ W 600a product card banner

Mitsubishi Chemical Group

METABLEN™ W 600A

Function: Impact Modifier

Compatible Polymers & Resins: Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ W-600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance  Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ C 223a product card banner

Mitsubishi Chemical Group

METABLEN™ C 223A

Function: Impact Modifier

Chemical Family: Butadienes

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Thermoplastic Polyolefins (TPO), Polypropylenes (PP), Polystyrenes (PS), Polyesters

Processing Methods: Extrusion, Injection Molding

End Uses: Aerospace Applications, Construction Applications, Automotive Applications, Consumer Applications, Appliances

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ H 880 product card banner

Mitsubishi Chemical Group

METABLEN™ H 880

Function: Hardness Improver

Compatible Polymers & Resins: Polycarbonates (PC)

METABLEN™ H-880 is an acrylic surface hardening agent. It ican be used for polycarbonates in automotive panels and smart phones.BenefitsChanges pencil hardness from F to HImproves surface hardness while maintaining transparency*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ A 3800 product card banner

Mitsubishi Chemical Group

METABLEN™ A 3800

Function: Anti-Drip Agent

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Thermoplastic Polyurethane (TPU), Polyethylenes (PE), Polyesters

Processing Methods: Blow Molding, Structural Foam Molding, Compounding, Injection Molding

METABLEN™ A-3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2260 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2260

Function: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Acrylonitrile Styrene Acrylate (ASA), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS)

Processing Methods: Injection Molding

End Uses: Consumer Applications, Aerospace Applications, Automotive Applications, Appliances

METABLEN™ S-2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for aesthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ F 410 product card banner

Mitsubishi Chemical Group

METABLEN™ F 410

Function: Flattener, Anti-Blocking Agent

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Thermoplastic Polyurethane (TPU), Polyethylenes (PE), Poly(Methyl Methacrylate) (PMMA), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ F-410 is an acrylic gloss control agent that provides a matte finish for injection molded plastics and elastomers. It can also be used as a blocking inhibitor for film and sheet extrusion.FeaturesGood dispersibilityPrevents blocking of sheet and film*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2130 product card banner

Mitsubishi Chemical Group

METABLEN™ S 2130

Function: Impact Modifier

Compatible Polymers & Resins: Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC)

Processing Methods: Injection Molding

End Uses: Semiconductor Applications, Battery Cases

METABLEN™ S-2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ W 450a product card banner

Mitsubishi Chemical Group

METABLEN™ W 450A

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA)

METABLEN™ W-450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ Srk-200a product card banner

Mitsubishi Chemical Group

METABLEN™ SRK-200A

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Ertalon® Lfx Pa6 product card banner

Mitsubishi Chemical Group

Ertalon® LFX PA6

Polymer Name: Polyamide 6 (PA 6)

Physical Form: Plates, Rods, Tube

Features: Excellent Toughness, X-Ray Shielding, Excellent Mechanical Strength, Good Machinability, Radiation Resistant, High Fatigue Resistance, Good Sliding Properties, Wear Resistant, Electrically Insulating, High Hardness, Excellent Stiffness, Lubricated, Good Damping

Density: 1140.0 - 1140.0 kg/m³

Tensile Modulus: 3000.0 - 3000.0 MPa

Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes were specifically formulated for unlubricated, highly loaded, and slowly moving parts applications. This grade in particular displays high mechanical strength, stiffness, hardness, and toughness, great sliding properties, high mechanical damping capabilities, and exceptional electrical insulating properties. For these reasons, Nylatron® LFX PA6 / Ertalon® LFX PA6 components are often favored as a solution within the pharmaceutical, biotechnology, medical, and processing markets.

Duratron® Pi D7015g product card banner

Mitsubishi Chemical Group

Duratron® PI D7015G

Polymer Name: Polyimide (PI)

Physical Form: Plates, Rods, Tube

Features: Lubricated, Low Coefficient of Friction, Bearing Grade, Temperature Resistance, Wear Resistant, High Tolerance

Density: 1460.0 - 1460.0 kg/m³

Tensile Modulus: 4200.0 - 4200.0 MPa

Color: Black

Duratron® D7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron® D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and friction, it is a great choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor.

Nylatron® 4.6 Pa46 product card banner

Mitsubishi Chemical Group

Nylatron® 4.6 PA46

Polymer Name: Polyamide 46 (PA 46)

Physical Form: Plates, Rods

Features: Excellent Toughness, X-Ray Shielding, Excellent Mechanical Strength, Good Machinability, Radiation Resistant, Heat Aging Resistant, High Fatigue Resistance, Good Sliding Properties, Wear Resistant, Electrically Insulating, High Hardness, Excellent Stiffness, Creep Resistant, Good Damping

Density: 1190.0 - 1190.0 kg/m³

Tensile Modulus: 3400.0 - 3400.0 MPa

Nylatron® 4.6 Polyamide PA46 / Ertalon® 4.6 Polyamide PA46 shapes are characterized by their superior heat aging resistance, as well as their ability to retain their outstanding stiffness and creep resistance over a wide range of temperatures. Due to these unique capabilities, Nylatron® 4.6 PA46 / Ertalon® 4.6 PA46 components excel in extreme environments where PA6, PA66, POM, and PET materials typically fall short. Additional application examples for Nylatron® 4.6 PA46 / Ertalon® 4.6 PA46 include bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear components.

Fluorosint® Ptfe Mt-01 product card banner

Mitsubishi Chemical Group

Fluorosint® PTFE MT-01

Polymer Name: Polytetrafluoroethylene (PTFE)

Physical Form: Plates, Rods

Features: High Stiffness, Good Mechanical Properties, Odorless, High Temperature Strength, High Performance, Good Stability, Anti-Wear Properties, High Strength, High Tolerance

Density: 2270.0 - 2270.0 kg/m³

Tensile Modulus: 1900.0 - 1900.0 MPa

Color: Black

Fluorosint® MT-01 Polytetrafluoroethylene PTFE, is an extreme grade that was developed specifically for applications where the benefits of PTFE-based materials also require outstanding strength, stiffness, and stability. Often specified in seat, seal, and wear applications where extreme conditions are present, Fluorosint® MT-01 PTFE delivers superior mechanical performance at elevated temperatures.