Products
The Mitsubishi Chemical Group
jER™ YX8000D
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
End Uses: Semiconductor Applications, Radiation Curable Coating
Compatible Substrates & Surfaces: Glass, Steel, Plastics, Concrete, Fibers & Fabrics, Ceramic, Metal, Aluminum
Features: UV Curable, Radiation Curable, LED-curable, Faster Cure Time, Low Chlorine Content, Fast Cure, Transparency, Excellent Adhesion
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YL980
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Flame Retardant, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Excellent Electrical Insulation
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YX4000
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YX8040
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Coupling Agent, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Labeling Claims: High Purity
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YL983U
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Good Elastic Recovery, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Low Viscosity, Excellent Electrical Insulation
jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ W 300A
Function: Impact Modifier
Compatible Polymers & Resins: Polyvinyl Chloride (PVC)
Processing Methods: Extrusion, Injection Molding
End Uses: Roofing Membranes, Vinyl Sheets, Film
METABLEN™ W 300A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for transparent polyvinyl chloride (PVC) in corrugated sheet and film.FeaturesHigh level of elasticity Excellent transparency propertiesGood impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ A 3000
Function: Processing Aid
Chemical Family: Fluoropolymers, Acrylics, Acrylates & Methacrylates
Compatible Polymers & Resins: Polyamides, Polypropylenes (PP), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polyethylenes (PE), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Thermoplastic Polyurethane (TPU), Polystyrenes (PS)
Processing Methods: Calendering, Machining, Blow Molding, Profile Extrusion, Extrusion, Structural Foam Molding
End Uses: Furniture, Profiles, Consumer Applications, Automotive Interior Parts, Electrical/Electronic Applications, Office Automation Equipment, Housings, Wires, Cables
METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ 1750
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol F Type Epoxy
Labeling Claims: High Purity
jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ C 223A
Function: Impact Modifier
Chemical Family: Butadienes
Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Thermoplastic Polyolefins (TPO), Polypropylenes (PP), High-Impact Polystyrene (HIPS), Polystyrenes (PS), Polyesters
Processing Methods: Extrusion, Injection Molding
End Uses: Aerospace Applications, Construction Applications, Automotive Applications, Consumer Applications, Automotive Electronics, Appliances
METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
DIACRON™ FC-1565
Chemical Family: Polyesters
End Uses: Solventborne Coating, Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Plastics, Iron, Aluminum, Copper, Metal
Features: Excellent Solubility, Excellent Adhesion, Improved Hardness, Good Toughness, Good Pigment Dispersion, Solvent Resistance, High Durability, Heat Resistance
DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
SymaLITE®
Function: Molding Compound
Chemical Family: Polyolefins, Polypropylenes (PP)
Reinforcement Material: Glass Fibers, Polypropylene (PP)
Processing Methods: Compression Molding
End Uses: Headliners, Undershield, Gearbox Covers, Engine Covers, Structural Components, Covers
SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.
The Mitsubishi Chemical Group
Mitsubishi Chemical Group GMT
Function: Molding Compound
Chemical Family: Polyamides, Polyolefins, Polypropylenes (PP)
Reinforcement Material: Glass Fibers
Processing Methods: Compression Molding
End Uses: Structural Components, Fuel Tank Covers, Battery Trays, Undershield, Wall Panels
Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.
The Mitsubishi Chemical Group
DIACRON™ FC-3399
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Copper, Metal, Plastics
Features: Good Mechanical Properties, Good Toughness, Multi-Substrate Adhesion, Chemical Resistance, Weather Resistance, High Impact Resistance, Improved Flexibility, Excellent Weatherability, Low Temperature-Curing, Low VOC, Excellent Solubility
DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
SHIKOH™ UV-3520TH
Chemical Family: Urethane Acrylates
CASE Ingredients Features: Improved Flexibility, Good Toughness, Improved Tear Strength, Good Elasticity, Radiation Curable, Crack Resistance, Tack-free, Weather Resistance, Excellent Adhesion, Good Elongation, High Tensile Strength
SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
DIACRON™ FC-3352
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Copper, Metal, Plastics
Features: Improved Hardness, Good Toughness, Solvent Resistance, Low Viscosity, Heat Resistance, High Glass Transition Temperature, Excellent Solubility
DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
Altron™ PC
Polymer Name: Polycarbonate (PC)
Physical Form: Plates
Features: Good Impact Strength, Excellent Dielectric Properties, Acid Resistant, High Impact Resistance, High Modulus of Elasticity, UV Stabilized, High Strength, Amorphous, Low Moisture Absorption, Good Electrical Properties, High Tolerance
Density: 1200.0 - 1200.0 kg/m³
Tensile Modulus: 2400.0 - 2400.0 MPa
Color: Transparent
Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations
The Mitsubishi Chemical Group
DIACRON™ FC-3288
Chemical Family: Polyesters
End Uses: Solventborne Coating, Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Plastics, Iron, Aluminum, Glass, Copper, Metal
Features: Excellent Solubility, Excellent Adhesion, Low Glass Transition Temperature, Improved Hardness, Good Toughness, Water Resistance, Multi-Substrate Adhesion, Good Pigment Dispersion, Improved Flexibility, Heat Resistance
DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
DIACRON™ FC-3294
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Glass, Copper, Metal, Plastics
Features: Improved Hardness, Good Toughness, Water Resistance, Multi-Substrate Adhesion, Good Pigment Dispersion, Weather Resistance, Improved Flexibility, Improved Glass Transition Temperature, Solvent Resistance, High Durability, Excellent Weatherability, Heat Resistance, Corrosion Resistance, Excellent Solubility, Excellent Adhesion
DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
GMTex®
Function: Molding Compound
Chemical Family: Polyamides, Polyolefins, Polypropylenes (PP)
Reinforcement Material: Glass Fibers
Processing Methods: Compression Molding
End Uses: Instrument Panels, Structural Components, Seats, Tail Gates
GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications
The Mitsubishi Chemical Group
DIACRON™ FC-3278
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Copper, Paper, Metal, Plastics
Features: Improved Hardness, Good Toughness, Solvent Resistance, Heat Resistance
DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
DIACRON™ ER-502
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Copper, Metal, Plastics
Features: Improved Hardness, Good Toughness, Good Pigment Dispersion, Solvent Resistance, High Durability, Heat Resistance, Excellent Solubility, Excellent Adhesion
DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
DIACRON™ FC-1588
Chemical Family: Polyesters
End Uses: Primer, Electrostatic Ink, Flexography Ink, Electrophotography Ink, Coil Coating, Letterpress Ink, Lacquers, Solventless & High Solids Coating, Offset Ink, Inkjet Ink, Lithographic Ink, Varnishes, Digital Ink, Solventborne Adhesive, Reactive Adhesive, Powder Coating, Gravure Ink, Screen Printing Ink
Compatible Substrates & Surfaces: Iron, Aluminum, Copper, Metal, Plastics
Features: Improved Hardness, Good Toughness, Good Pigment Dispersion, Solvent Resistance, High Durability, Low Viscosity, Heat Resistance, Excellent Solubility, Excellent Adhesion
DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.