Products

The Mitsubishi Chemical Group

jER™ YX7105

Polymer Name: Epoxy Resins & Compounds

Function: Impact Modifier, Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Plastics, Steel, Aluminum, Ceramic

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX8000D

Polymer Name: Epoxy Resins & Compounds

Function: Coupling Agent, Binder, Adhesion Promoter

Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy

End Uses: Semiconductor Applications, Radiation Curable Coating

Compatible Substrates & Surfaces: Glass, Steel, Plastics, Concrete, Fibers & Fabrics, Ceramic, Metal, Aluminum

Features: UV Curable, Radiation Curable, LED-curable, Faster Cure Time, Low Chlorine Content, Fast Cure, Transparency, Excellent Adhesion

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YL980

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Adhesion Promoter, Coupling Agent

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy, Bisphenol Epoxy Resins

End Uses: Underfill, Semiconductor Applications

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic

Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Flame Retardant, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Excellent Electrical Insulation

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Maintains high electrical reliability  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX8040

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Coupling Agent, Adhesion Promoter

Chemical Family: Epoxy & Epoxy Derivatives

Labeling Claims: High Purity

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S 2001

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Recycled Plastics, Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YL983U

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Adhesion Promoter, Coupling Agent

Chemical Family: Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins

End Uses: Underfill, Semiconductor Applications

Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic

Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Good Elastic Recovery, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Low Viscosity, Excellent Electrical Insulation

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S 2200

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

The Mitsubishi Chemical Group

METABLEN™ S 2030

Function: Impact Modifier

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

End Uses: Electrical/Electronic Applications, Consumer Applications, Aerospace Applications, Automotive Applications

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ A 3000

Function: Processing Aid

Chemical Family: Fluoropolymers, Acrylics, Acrylates & Methacrylates

Compatible Polymers & Resins: Polyamides, Polypropylenes (PP), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polyethylenes (PE), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Thermoplastic Polyurethane (TPU), Polystyrenes (PS)

Processing Methods: Calendering, Machining, Blow Molding, Profile Extrusion, Extrusion, Structural Foam Molding

End Uses: Furniture, Profiles, Consumer Applications, Automotive Interior Parts, Electrical/Electronic Applications, Office Automation Equipment, Housings, Wires, Cables

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S 2100

Function: Impact Modifier

Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ A 3750

Function: Anti-Drip Agent

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polyethylenes (PE), Polyesters, Polycarbonates (PC), Polyamides, Polystyrenes (PS), Polyvinyl Chloride (PVC)

Processing Methods: Blow Molding, Structural Foam Molding, Vacuum Casting, Extrusion, Compounding, Injection Molding, Profile Extrusion

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S X-006

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Acrylonitrile Styrene Acrylate (ASA), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ S X-006 is a silicone-acrylic rubber-type impact modifier that provides colorability, heat-aging resistance and impact strength. It is used for polycarbonates polycarbonate/acrylonitrile butadiene styrene (PC/ABS) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ W 600A

Function: Impact Modifier

Compatible Polymers & Resins: Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance  Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S X-005

Function: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polybutylene Terephthalate (PBT), Polyethylenes (PE)

Processing Methods: Injection Molding

End Uses: Appliances, Semiconductor Applications, Battery Cases

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ 1750

Polymer Name: Epoxy Resins & Compounds

Function: Binder, Adhesion Promoter, Coupling Agent

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol F Type Epoxy

Labeling Claims: High Purity

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ A 3800

Function: Anti-Drip Agent

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Thermoplastic Polyurethane (TPU), Polyethylenes (PE), Polyesters

Processing Methods: Blow Molding, Structural Foam Molding, Compounding, Injection Molding

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ C 223A

Function: Impact Modifier

Chemical Family: Butadienes

Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Thermoplastic Polyolefins (TPO), Polypropylenes (PP), High-Impact Polystyrene (HIPS), Polystyrenes (PS), Polyesters

Processing Methods: Extrusion, Injection Molding

End Uses: Aerospace Applications, Construction Applications, Automotive Applications, Consumer Applications, Automotive Electronics, Appliances

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S 2260

Function: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Acrylonitrile Styrene Acrylate (ASA), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS)

Processing Methods: Injection Molding

End Uses: Consumer Applications, Aerospace Applications, Automotive Applications, Appliances

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ SRK-200A

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ F 410

Function: Flattener, Anti-Blocking Agent

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Thermoplastic Polyurethane (TPU), Polyethylenes (PE), Poly(Methyl Methacrylate) (PMMA), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA)

Processing Methods: Injection Molding

METABLEN™ F 410 is an acrylic gloss control agent that provides a matte finish for injection molded plastics and elastomers. It can also be used as a blocking inhibitor for film and sheet extrusion.FeaturesGood dispersibilityPrevents blocking of sheet and film *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ W 450A

Function: Impact Modifier

Compatible Polymers & Resins: Polyamides, Acrylonitrile Butadiene Styrene (ABS), Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA)

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

METABLEN™ S 2130

Function: Impact Modifier

Compatible Polymers & Resins: Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC)

Processing Methods: Injection Molding

End Uses: Semiconductor Applications, Battery Cases

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

SHIKOH™ UV-3300B

Chemical Family: Urethane Acrylates

Compatible Substrates & Surfaces: Metal

Molecular Weight: 13000.0 - 13000.0 g/mol

CASE Ingredients Features: Radiation Curable, Non-Yellowing Grade, Humidity Resistance, Good Elongation, Good Mechanical Properties, Heat Resistance, Weather Resistance, Excellent Adhesion, Good Elasticity

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer   *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

KyronMAX® S-4330

Polymer Name: Polyphthalamide (PPA)

Processing Methods: Injection Molding

Flexural Modulus: 40000.0 - 40000.0 MPa

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

The Mitsubishi Chemical Group

Duratron® PAI T5530

Polymer Name: Polyamide-imide (PAI)

Physical Form: Plates, Rods, Tube

Features: High Loading Absorption Capability, Odorless, Low Thermal Expansion, High Rigidity, Dimensional Stability, Creep Resistant, Temperature Resistance, Good Electrical Properties, Good Stiffness, High Tolerance

Density: 1600.0 - 1600.0 kg/m³

Tensile Modulus: 6892.0 - 6892.0 MPa

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

The Mitsubishi Chemical Group

KyronMAX® S-2240

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Flexural Modulus: 38000.0 - 38000.0 MPa

KyronMAX® S-2240 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and impact resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh impact resistance: able to withstand high impact applications.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and impactEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength, stiffness, and impact resistance is neededHigh impact applications, such as aerospace, automotive and heavy equipment components.KyronMAX® S-2240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

The Mitsubishi Chemical Group

METABLEN™ S 2501

Function: Impact Modifier, Flame Retardant

Chemical Family: Silicon-based Compounds, Acrylics, Acrylates & Methacrylates

Compatible Polymers & Resins: Polycarbonates (PC), Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Polyethylene Terephthalate (PET), Polybutylene Terephthalate (PBT)

Processing Methods: Extrusion, Injection Molding

End Uses: Aerospace Applications, Consumer Applications, Automotive Interior Parts, Automotive Exterior Parts, Electrical/Electronic Applications

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

SHIKOH™ UV-3520TH

Chemical Family: Urethane Acrylates

CASE Ingredients Features: Improved Flexibility, Good Toughness, Improved Tear Strength, Good Elasticity, Radiation Curable, Crack Resistance, Tack-free, Weather Resistance, Excellent Adhesion, Good Elongation, High Tensile Strength

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet   *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

KyronMAX® S-9230

Polymer Name: Polyetheretherketone (PEEK)

Processing Methods: Injection Molding

Flexural Modulus: 31000.0 - 31000.0 MPa

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

The Mitsubishi Chemical Group

KyronMAX® S-4340

Polymer Name: Polyphthalamide (PPA)

Processing Methods: Injection Molding

Flexural Modulus: 37000.0 - 37000.0 MPa

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

The Mitsubishi Chemical Group

KyronMAX® S-4240

Polymer Name: Polyphthalamide (PPA)

Processing Methods: Injection Molding

Flexural Modulus: 40000.0 - 40000.0 MPa

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

The Mitsubishi Chemical Group

Semitron® ESd 410C PEI

Polymer Name: Polyether Imide (PEI)

Physical Form: Plates, Rods

Features: High Tolerance, ESD Protection, Dimensional Stability, Static-Dissipative, Low Water Absorption, Odorless, Low Thermal Expansion

Density: 1410.0 - 1410.0 kg/m³

Tensile Modulus: 5850.0 - 5850.0 MPa

Color: Black

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

The Mitsubishi Chemical Group

Fluorosint® PTFE 135

Polymer Name: Polytetrafluoroethylene (PTFE)

Physical Form: Plates, Rods, Tube

Features: High Stiffness, Low Coefficient of Friction, Anti-Wear Properties, Good Mechanical Properties, High Strength, High Performance, High Tolerance

Density: 1890.0 - 1890.0 kg/m³

Tensile Modulus: 1.238 - 1.238 MPa

Color: Black

Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

The Mitsubishi Chemical Group

SHIKOH™ UT-7792

Chemical Family: Urethane Acrylates

Compatible Substrates & Surfaces: Metal

CASE Ingredients Features: Excellent Adhesion, Good Elasticity, Non-Yellowing Grade, Good Elongation, Radiation Curable

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer   *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

SHIKOH™ UV-3700B

Chemical Family: Urethane Acrylates

Molecular Weight: 38000.0 - 38000.0 g/mol

CASE Ingredients Features: Improved Flexibility, Good Elasticity, Good Toughness, Low Viscosity, Non-Yellowing Grade, Good Elongation, Radiation Curable, Excellent Adhesion

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer   *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

KyronMAX® S-2230

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Flexural Modulus: 26000.0 - 26000.0 MPa

KyronMAX® S-2230 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required, making it ideal for components that will be exposed to high stress, high impact and high temperature environments.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environments, such as those exposed to high temperature and stress.KyronMAX® S-2230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered