The Mitsubishi Chemical Group
jER™ YX7105
Polymer Name: Epoxy Resins & Compounds
Function: Impact Modifier, Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces: Concrete, Glass, Fibers & Fabrics, Metal, Plastics, Steel, Aluminum, Ceramic
jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YX8000D
Polymer Name: Epoxy Resins & Compounds
Function: Coupling Agent, Binder, Adhesion Promoter
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
End Uses: Semiconductor Applications, Radiation Curable Coating
Compatible Substrates & Surfaces: Glass, Steel, Plastics, Concrete, Fibers & Fabrics, Ceramic, Metal, Aluminum
Features: UV Curable, Radiation Curable, LED-curable, Faster Cure Time, Low Chlorine Content, Fast Cure, Transparency, Excellent Adhesion
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YL980
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Flame Retardant, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Excellent Electrical Insulation
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YX8040
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Coupling Agent, Adhesion Promoter
Chemical Family: Epoxy & Epoxy Derivatives
Labeling Claims: High Purity
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ S 2001
Function: Impact Modifier
Compatible Polymers & Resins: Polycarbonates (PC), Polyvinyl Chloride (PVC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Recycled Plastics, Poly(Methyl Methacrylate) (PMMA), Polyesters
Processing Methods: Injection Molding
End Uses: Appliances, Semiconductor Applications, Battery Cases
METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ YL983U
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins
End Uses: Underfill, Semiconductor Applications
Compatible Substrates & Surfaces: Concrete, Metal, Aluminum, Glass, Steel, Plastics, Fibers & Fabrics, Ceramic
Features: Heat Resistance, Reduced Wear, Improved Dimensional Stability, Good Elastic Recovery, Water Resistant, Good Mechanical Properties, Good Electrical Properties, Abrasion Resistance, Chemical Resistant, Electrically Insulating, Low Chlorine Content, Water Resistance, Chemical Resistance, Improved Flexibility, Low Viscosity, Excellent Electrical Insulation
jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ S 2200
Function: Impact Modifier
Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters
Processing Methods: Injection Molding
End Uses: Appliances, Semiconductor Applications, Battery Cases
METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
The Mitsubishi Chemical Group
METABLEN™ S 2100
Function: Impact Modifier
Compatible Polymers & Resins: Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyesters
Processing Methods: Injection Molding
End Uses: Appliances, Semiconductor Applications, Battery Cases
METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
jER™ 1750
Polymer Name: Epoxy Resins & Compounds
Function: Binder, Adhesion Promoter, Coupling Agent
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol F Type Epoxy
Labeling Claims: High Purity
jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ S X-005
Function: Impact Modifier
Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC), Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polybutylene Terephthalate (PBT), Polyethylenes (PE)
Processing Methods: Injection Molding
End Uses: Appliances, Semiconductor Applications, Battery Cases
METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
The Mitsubishi Chemical Group
METABLEN™ S 2130
Function: Impact Modifier
Compatible Polymers & Resins: Polylactic Acid (PLA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyesters, Polycarbonates (PC)
Processing Methods: Injection Molding
End Uses: Semiconductor Applications, Battery Cases
METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.