Company logo

Products

Mitsubishi Chemical Group Corporation
Fast Response Times
Other Packaging & Assembly Applications
11 products found on Mitsubishi Chemical Group Corporation in Other Packaging & Assembly Applications .
With SDS
With TDS
Jer™ Yx7105 product card banner

Mitsubishi Chemical Group Corporation

jER™ YX7105

Polymer Name: Epoxy Resins & Compounds

Functions: Adhesion Promoter, Coupling Agent, Resins, Binders & Matrix Materials, Impact Modifier, Resin, Binder & Resin

Chemical Family: Epoxy & Epoxy Derivatives

Compatible Substrates & Surfaces: Aluminum, Metal, Fibers & Fabrics, Glass, Plastics, Concrete, Steel, Ceramic

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx8000d product card banner

Mitsubishi Chemical Group Corporation

jER™ YX8000D

Polymer Name: Epoxy Resins & Compounds

Functions: Binder & Resin, Adhesion Promoter, Coupling Agent, Resins, Binders & Matrix Materials, Resin

Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy

End Uses: Semiconductor Applications, Radiation Curable Coating

Compatible Substrates & Surfaces: Glass, Aluminum, Plastics, Concrete, Fibers & Fabrics, Steel, Ceramic, Metal

Features: UV Curable, LED-curable, Radiation Curable, Excellent Adhesion, Low Chlorine Content, Faster Cure Time, Fast Cure, Transparency

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yl980 product card banner

Mitsubishi Chemical Group Corporation

jER™ YL980

Polymer Name: Epoxy Resins & Compounds

Functions: Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Resin, Binder & Resin

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol A Type Epoxy

End Uses: Semiconductor Applications, Underfill

Compatible Substrates & Surfaces: Aluminum, Plastics, Fibers & Fabrics, Ceramic, Glass, Concrete, Steel, Metal

Features: Electrically Insulating, Good Electrical Properties, Low Chlorine Content, Chemical Resistance, Excellent Electrical Insulation, Chemical Resistant, Improved Dimensional Stability, Reduced Wear, Flame Retardant, Water Resistant, Improved Flexibility, Water Resistance, Abrasion Resistance, Heat Resistance, Good Mechanical Properties

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx8040 product card banner

Mitsubishi Chemical Group Corporation

jER™ YX8040

Polymer Name: Epoxy Resins & Compounds

Functions: Adhesion Promoter, Resin, Coupling Agent, Resins, Binders & Matrix Materials, Binder & Resin

Chemical Family: Epoxy & Epoxy Derivatives

Labeling Claims: High Purity

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Metablen™ S 2001 product card banner

Mitsubishi Chemical Group Corporation

METABLEN™ S 2001

Functions: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC), Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyesters, Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Recycled Plastics

Processing Methods: Injection Molding

End Uses: Appliances, Battery Cases, Semiconductor Applications

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yl983u product card banner

Mitsubishi Chemical Group Corporation

jER™ YL983U

Polymer Name: Epoxy Resins & Compounds

Functions: Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Resin, Binder & Resin

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol F Type Epoxy

End Uses: Semiconductor Applications, Underfill

Compatible Substrates & Surfaces: Aluminum, Plastics, Fibers & Fabrics, Ceramic, Glass, Concrete, Steel, Metal

Features: Electrically Insulating, Good Electrical Properties, Low Chlorine Content, Chemical Resistance, Excellent Electrical Insulation, Chemical Resistant, Improved Dimensional Stability, Low Viscosity, Good Elastic Recovery, Reduced Wear, Water Resistant, Improved Flexibility, Water Resistance, Abrasion Resistance, Heat Resistance, Good Mechanical Properties

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Metablen™ S 2200 product card banner

Mitsubishi Chemical Group Corporation

METABLEN™ S 2200

Functions: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC), Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyesters, Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC)

Processing Methods: Injection Molding

End Uses: Appliances, Battery Cases, Semiconductor Applications

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Metablen™ S 2100 product card banner

Mitsubishi Chemical Group Corporation

METABLEN™ S 2100

Functions: Impact Modifier

Compatible Polymers & Resins: Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC), Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyesters, Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC)

Processing Methods: Injection Molding

End Uses: Appliances, Battery Cases, Semiconductor Applications

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Metablen™ S X-005 product card banner

Mitsubishi Chemical Group Corporation

METABLEN™ S X-005

Functions: Impact Modifier

Compatible Polymers & Resins: Polypropylenes (PP), Polyethylenes (PE), Polyesters, Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC), Polyolefins, Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS)

Processing Methods: Injection Molding

End Uses: Semiconductor Applications, Appliances, Battery Cases

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ 1750 product card banner

Mitsubishi Chemical Group Corporation

jER™ 1750

Polymer Name: Epoxy Resins & Compounds

Functions: Adhesion Promoter, Resin, Coupling Agent, Resins, Binders & Matrix Materials, Binder & Resin

Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol F Type Epoxy, Bisphenol Epoxy Resins

Labeling Claims: High Purity

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Metablen™ S 2130 product card banner

Mitsubishi Chemical Group Corporation

METABLEN™ S 2130

Functions: Impact Modifier

Compatible Polymers & Resins: Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC)

Processing Methods: Injection Molding

End Uses: Battery Cases, Semiconductor Applications

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.