Products

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.

Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.

Semitron® HPV ESd PEEK shapes are specially formulated with specific additives that make them an excellent performer in wear and friction applications where antistatic properties are essential. These shapes are specifically designed for electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability.Features:Contains specific additives that provide excellent performance in wear and friction applicationsAntistatic properties for electronic fixture applicationsHigh dimensional stability over an extended thermal rangePrecise machinabilityBenefits:Improved performance in wear and friction applicationsReduced risk of static discharge damage to electronic componentsLong-lasting dimensional stability in high-temperature environmentsEasy to machine for precise applicationsApplications:Electronic fixture applications such as test sockets, contactors, and nestsWear and friction applications where antistatic properties are essentialHigh-temperature applications that require dimensional stability and precise machiningVacuum chamber components and other semiconductor equipment.

γ - Butyrolactone (GBL) has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.

Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

DURABIO™ D5380 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for transparent sheets, consumer goods, E&E housing, and cosmetic containers. This grade is suitable for extrusion mold.

Semitron® MP 370 shapes exhibit excellent moisture absorption and thermal resistance, while also maintaining outstanding strength and dimensional stability. As a result, this grade is often selected for test socket applications where precision machining is critical, and complex geometries are prevalent.Features:Excellent moisture absorptionHigh thermal resistanceOutstanding strength and dimensional stabilityExcellent machinabilityBenefits:Allows for precision machining and complex geometries in test socket applicationsProvides greater strength and dimensional stability compared to unfilled PEEK materialsLow internal stresses and no "soft center" issues associated with injection molded blanksApplications:Test sockets for the semiconductor manufacturing industryPrecision machining and complex geometries in various industries where high thermal resistance and moisture absorption are required.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

KyronMAX® S-4230 is a high-performance polymer that combines the excellent strength, stiffness and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

DURABIO™ DT7010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and high impact strength. It is suitable for injection mold.

DURABIO™ DT6010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high-impact strength. It is suitable for injection mold.

KyronMAX® S-2212 is an advanced polymer material that combines the excellent strength, stiffness, and impact resistance of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and toughness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent impact resistance, toughness and good chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high toughness, such as gears, cogs, and sprockets for industrial machinery and equipmentKyronMAX® S-2212 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with the manufacturer for the exact content and its effect on the properties of the final material.

KyronMAX® S-2230 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required, making it ideal for components that will be exposed to high stress, high impact and high temperature environments.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environments, such as those exposed to high temperature and stress.KyronMAX® S-2230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

N - Methyl - 2 - Pyrrolidone (NMP) is a solvent in the pyrrolidones family. Recognized for its high solvency, low freezing point, and hygroscopic properties, NMP serves diverse applications. With a low freezing point, high boiling point, and high flash point, it excels in industrial additives, particularly in lithium-ion batteries for the electrical and electronics market. Packaged in drums, tanks. Our NMP is ensured with high purity by integrated production process from butane - based maleic anhydride.