Matching Product Categories
CASE Ingredients
Plastics
Composite Materials
Ready-to-Use Products
31 products found on The Mitsubishi Chemical Group.
With SDS
With TDS
Jer™ Yx7105 product card banner

The Mitsubishi Chemical Group

jER™ YX7105

Function: Adhesion Promoter, Binder, Coupling Agent, Impact Modifier

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx8000d product card banner

The Mitsubishi Chemical Group

jER™ YX8000D

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ 4250 product card banner

The Mitsubishi Chemical Group

jER™ 4250

Function: Adhesion Promoter, Binder, Coupling Agent, Impact Modifier, Plasticizer

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yl980 product card banner

The Mitsubishi Chemical Group

jER™ YL980

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Epoxy Yx7110 product card banner

The Mitsubishi Chemical Group

jER™ Epoxy YX7110

Function: Adhesion Promoter, Binder, Coupling Agent, Impact Modifier

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx4000 product card banner

The Mitsubishi Chemical Group

jER™ YX4000

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx8040 product card banner

The Mitsubishi Chemical Group

jER™ YX8040

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ 1256 product card banner

The Mitsubishi Chemical Group

jER™ 1256

Function: Adhesion Promoter, Binder, Coupling Agent, Impact Modifier, Plasticizer

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yl983u product card banner

The Mitsubishi Chemical Group

jER™ YL983U

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ Yx7400n product card banner

The Mitsubishi Chemical Group

jER™ YX7400N

Function: Adhesion Promoter, Binder, Coupling Agent, Impact Modifier

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Jer™ 1750 product card banner

The Mitsubishi Chemical Group

jER™ 1750

Function: Adhesion Promoter, Binder, Coupling Agent

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-3294 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-3294

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent pigment dispersion. Can be used with cross-linking agents. Excellent chemical and weather resistance   Benefits: Solvent solubility High solid differentiation Durability   Applications: For various types of inks (Screen printing and inkjet, etc. )               PCM coatings      Solventless & High Solids Coating     *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-1565 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-1565

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diabeam™ Mh-4109 product card banner

The Mitsubishi Chemical Group

DIABEAM™ MH-4109

Applications: Commercial, Other Automotive & Transportation Coatings, Other Automotive & Transportation Applications

Product Families: Other Resins & Binders, Acrylics, Top Coats

Chemical Family: Acrylics & Acrylates

End Uses: Hard Coat, Top Coat, Radiation Curable Coating

DIABEAM™ MH series are uv-curable, weather-resistant hard coat. A thin, strongly bonded coating on plastic substrate enhances the weatherability, scratch resistance and chemical resistance. MH4109 has very high abrasion resistance and good adhesion to polycarbonate substrate so that it can be used as topcoat for automotive exterior parts like emblems and door handle, as well as car interior parts such as meter panels. *DIABEAM™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diabeam™ Um-1273u product card banner

The Mitsubishi Chemical Group

DIABEAM™ UM-1273U

Applications: Commercial, Other Automotive & Transportation Coatings, Other Automotive & Transportation Applications

Product Families: Other Resins & Binders, Acrylics, Other Paints & Coatings

Chemical Family: Acrylics & Acrylates

End Uses: Undercoat, Radiation Curable Coating

DIABEAM™ UM-1273U is UV-curable undercoat for metal vapor deposition. It has good adhesion not only to vapor deposition layer of aluminum, tin and indium but also to plastic substrates, such as ABS, PC(Polycarbonate) and PMMA. Automotive exterior/interior parts such as millimeter-wave radar emblems are suitable applications of UM-1273T. *DIABEAM™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-1588 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-1588

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diabeam™ Mh-3881g product card banner

The Mitsubishi Chemical Group

DIABEAM™ MH-3881G

Applications: Commercial, Other Automotive & Transportation Coatings, Other Automotive & Transportation Applications

Product Families: Other Resins & Binders, Acrylics, Other Paints & Coatings

Chemical Family: Acrylics & Acrylates

End Uses: Hard Coat, Top Coat, Radiation Curable Coating

DIABEAM™ MH series are uv-curable, weather-resistant hard coat. A thin, strongly bonded coating on plastic substrate enhances the weatherability, scratch resistance and chemical resistance. MH3881G has the most excellent weatherability among the series and good adhesion to polycarbonate substrate so that it is suitable for using topcoat for automotive exterior parts such as Millimeter-wave radar emblems, LiDAR, and Radiator grilles. *DIABEAM™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Er-502 product card banner

The Mitsubishi Chemical Group

DIACRON™ ER-502

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diabeam™ Mh-4332 product card banner

The Mitsubishi Chemical Group

DIABEAM™ MH-4332

Applications: Commercial, Other Automotive & Transportation Coatings, Other Automotive & Transportation Applications

Product Families: Other Resins & Binders, Acrylics, Top Coats

Chemical Family: Acrylics & Acrylates

End Uses: Radiation Curable Coating, Hard Coat

DIABEAM™ MH series are uv-curable, weather-resistant hard coat. A thin, strongly bonded coating on plastic substrate enhances the weatherability, scratch resistance and chemical resistance. MH4332 specialized in good adhesion to PMMA substrate so that it is suitable for topcoat both for automotive exterior parts such as lamp lenses as well as car interior parts like meter panels. *DIABEAM™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Shikoh™ Ut-7792 product card banner

The Mitsubishi Chemical Group

SHIKOH™ UT-7792

Applications: Electronics Adhesives, Consumer Electronics, Additive Manufacturing

Product Families: Photoactive Resins, Oligomers, Other Resins & Binders

Chemical Family: Urethane Acrylates

End Uses: Undercoat, Radiation Curable Coating, Radiation Curable Adhesive

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Shikoh™ Uv-3300b product card banner

The Mitsubishi Chemical Group

SHIKOH™ UV-3300B

Molecular Weight: 13000.0 - 13000.0 g/mol

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-3278 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-3278

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-3288 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-3288

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins Mb-8031 product card banner

The Mitsubishi Chemical Group

Acrylic Bead Resins MB-8031

Applications: Film & Foil Coatings, Food & Beverage Packaging, Processing & Packaging

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates

End Uses: Lacquers

Acrylic Bead Resins MB-8031 is a thermoplastic acrylic resin in non-dusting bead form. This product adheres well to various substrates such as PVC, polystyrene, and metal, and is designed for heat-sealed adhesives and lacquers. It offers excellent mechanical performance and has good impact strength and abrasion resistance.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-3352 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-3352

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diabeam™ Um-1280t product card banner

The Mitsubishi Chemical Group

DIABEAM™ UM-1280T

Applications: Commercial, Other Automotive & Transportation Coatings, Other Automotive & Transportation Applications

Product Families: Other Resins & Binders, Acrylics, Protective Coatings

Chemical Family: Acrylics & Acrylates

End Uses: Top Coat, Radiation Curable Coating

DIABEAM™ UM-1280T is UV-curable topcoat for metal vapor deposition. It enhances good appearance and good adhesion to aluminum, tin and indium as well as good humidity resistance. Automotive exterior/interior parts such as millimeter-wave radar emblems are suitable applications of UM-1280T. *DIABEAM™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Shikoh™ Uv-3520th product card banner

The Mitsubishi Chemical Group

SHIKOH™ UV-3520TH

Applications: Electronics Adhesives, Consumer Electronics, Electronics Coatings

Product Families: Photoactive Resins, Other Resins & Binders, Oligomers

Chemical Family: Urethane Acrylates

End Uses: Radiation Curable Coating

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Shikoh™ Uv-3700b product card banner

The Mitsubishi Chemical Group

SHIKOH™ UV-3700B

Molecular Weight: 38000.0 - 38000.0 g/mol

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Diacron™ Fc-3399 product card banner

The Mitsubishi Chemical Group

DIACRON™ FC-3399

Applications: Industrial Manufacturing, Construction Adhesives, Tape & Label Adhesives

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Offset Ink, Lithographic Ink, Electrostatic Ink

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins Tb-322 product card banner

The Mitsubishi Chemical Group

Acrylic Bead Resins TB-322

Applications: Marine, Automotive OEM Coatings, Marine Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Methacrylates

End Uses: Solventborne Coating

Acrylic Bead Resins TB-322 is a solid bead methacrylate copolymer intended for use in solvent-based coating systems where improved adhesion to difficult metals is important. TB-322 exhibits excellent outdoor durability. The resin may be used in adhesives and a variety of metal coatings applications such as transportation finishes in automotive, container and other marine coatings, and a variety of brass and aluminum coating applications.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins Br-117 product card banner

The Mitsubishi Chemical Group

Acrylic Bead Resins BR-117

Applications: Primers & Lacquers, Packaging Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates

End Uses: Lacquers

Acrylic Bead Resins BR-117 is a thermoplastic acrylic resin, with white non-dusting bead form, specially designed for heat sealed adhesives and inks. It has excellent adhesion for metals and plastics. It is also easy to be soluble to aliphatic and alcoholic mixed solvents.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Browse
Sample
Chat
Request
Search