Products

Mitsubishi Chemical Group Corporation

Fast Response Times
Matching Product Categories

19 Products found on Mitsubishi Chemical Group Corporation

With SDS
With TDS
Ertacetal® C LQ POM-C banner
Mitsubishi Chemical Group Corporation company logo
Ertacetal® C LQ POM-C
  • Polymer Name:Polyacetal Copolymer (POM)
  • Physical Form:Plates, Rods
  • Features:Alkali Resistant, Low Water Absorption, Wear Resistant, Laser Markable, Excellent Stiffness, Creep Resistant, Dimensional Stability, Good Machinability, High Hardness, Exceptional Resilience, Enhanced Physical Properties, High Thermo-Oxidative Stability, Good Sliding Properties, Excellent Mechanical Strength, Excellent Dielectric Properties, Hydrolysis Resistant, Electrically Insulating
  • Density:1430.0 - 1430.0 kg/m³
  • Tensile Modulus:3100.0 - 3100.0 MPa
  • Color:White
Ertacetal® C LQ - the ultimate solution for laser technology applications. Made from Polyoxymethylene (POM-C), this specialized grade is specifically designed to show markings with common laser technologies such as IR-YAG and UV-YAG. Unlike standard POM-C, which only experiences burning but no visible dark marking, Ertacetal® C LQ POM-C offers a bright-white, less transparent color that makes it perfect for laser marking, engraving, and cutting applications.Features:Bright-white, less transparent color for improved laser marking visibilityIdentical physical properties and machinability as standard Ertacetal® C natural POM-CProcessed by extrusion technology for consistent, high-quality performanceBenefits:Provides clear and precise markings with common laser technologiesCan be used in a wide range of laser technology applications such as engraving, cutting and markingHigh-quality and consistent performanceApplications:Laser technology applications such as engraving, cutting and markingIndustrial manufacturing and production processesMedical and diagnostic equipmentElectrical and electronic components
Nylatron® 4.6 PA46 banner
Mitsubishi Chemical Group Corporation company logo
Nylatron® 4.6 PA46
  • Polymer Name:Polyamide 46 (PA 46)
  • Physical Form:Plates, Rods
  • Features:Good Damping, Wear Resistant, High Fatigue Resistance, Excellent Stiffness, Creep Resistant, Good Machinability, High Hardness, Radiation Resistant, Good Sliding Properties, Excellent Mechanical Strength, Excellent Toughness, Heat Aging Resistant, Electrically Insulating, X-Ray Shielding
  • Density:1190.0 - 1190.0 kg/m³
  • Tensile Modulus:3400.0 - 3400.0 MPa
Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.
Ertacetal® C ELS POM-C banner
Mitsubishi Chemical Group Corporation company logo
Ertacetal® C ELS POM-C
  • Polymer Name:Polyacetal Copolymer (POM)
  • Physical Form:Plates, Rods
  • Features:Low Water Absorption, Wear Resistant, Excellent Stiffness, Creep Resistant, Low Moisture Absorption, Dimensional Stability, Good Machinability, High Hardness, Exceptional Resilience, Good Sliding Properties, Excellent Mechanical Strength, Electrically Conductive, Excellent Dielectric Properties, Electrically Insulating, High Strength
  • Density:1410.0 - 1410.0 kg/m³
  • Tensile Modulus:1500.0 - 1500.0 MPa
Ertacetal® C ELS Polyoxymethylene POM-C shapes exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness, and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications, and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Features:Excellent electrical conductivityLow moisture absorptionHigh strength and stiffnessGreat machinabilityBenefits:Ertacetal® C ELS is the perfect solution for applications that require excellent electrical conductivity, low moisture absorption, and high strength and stiffness.Its great machinability makes it easy to work with, ensuring precise and accurate production.Applications:Ertacetal® C ELS is ideal for use in electrical and explosion sensitive applications and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Its excellent electrical conductivity makes it perfect for use in electrical equipment, and its low moisture absorption ensures that it can be used in harsh environments without any issues.Its high strength and stiffness make it suitable for use in applications where precision and accuracy is required.
Techtron® HPV PPS banner
Mitsubishi Chemical Group Corporation company logo
Techtron® HPV PPS
  • Polymer Name:Polyphenylene Sulfide (PPS)
  • Physical Form:Rods, Plates
  • Features:Dimensional Stability, High Tolerance, Excellent Hydrolysis Resistance, Low Flammability, Odorless, Low Coefficient of Friction, Lubricated, Excellent Dielectric Properties, Electrically Insulating, Food Contact Acceptable, Chemical Resistant, Wear Resistant
  • Density:1420.0 - 1420.0 kg/m³
  • Tensile Modulus:4000.0 - 4000.0 MPa
  • Color:Blue
Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.
Duratron® PI D7000 banner
Mitsubishi Chemical Group Corporation company logo
Duratron® PI D7000
  • Polymer Name:Polyimide (PI)
  • Physical Form:Sheets, Rods, Tube
  • Features:Good Mechanical Properties, Dimensional Stability, High Tolerance, Cost Effective, Thermally Insulating, Excellent Toughness, High Temperature Resistance, Electrically Insulating, High Strength, Service Life Extension, Chemical Resistant, Light Weight
  • Density:1380.0 - 1380.0 kg/m³
  • Tensile Modulus:3700.0 - 3700.0 MPa
  • Color:Brown
Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.
Ertalon® LFX PA6 banner
Mitsubishi Chemical Group Corporation company logo
Ertalon® LFX PA6
  • Polymer Name:Polyamide 6 (PA 6)
  • Physical Form:Rods, Tube, Plates
  • Features:Good Machinability, High Hardness, Radiation Resistant, Good Sliding Properties, Excellent Mechanical Strength, Lubricated, Excellent Toughness, Electrically Insulating, X-Ray Shielding, Good Damping, Wear Resistant, High Fatigue Resistance, Excellent Stiffness
  • Density:1140.0 - 1140.0 kg/m³
  • Tensile Modulus:3000.0 - 3000.0 MPa
Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.