Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Mitsubishi Chemical Group Corporation
All Mitsubishi Chemical Group Corporation
Search products
Matching Product Categories
Plastics
CASE Ingredients
Composite Materials
Markets
Certifications & Compliance
Labeling Claims
Physical Form
All Filters
22 Products found on Mitsubishi Chemical Group Corporation
Most Viewed
SDS
With SDS
TDS
With TDS
jER™ YL980
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Resin, Binder & Resin
Chemical Family:
Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol A Type Epoxy
End Uses:
Semiconductor Applications, Underfill
Compatible Substrates & Surfaces:
Aluminum, Plastics, Fibers & Fabrics, Ceramic, Glass, Concrete, Steel, Metal
Features:
Electrically Insulating, Good Electrical Properties, Low Chlorine Content, Chemical Resistance, Excellent Electrical Insulation, Chemical Resistant, Improved Dimensional Stability, Reduced Wear, Flame Retardant, Water Resistant, Improved Flexibility, Water Resistance, Abrasion Resistance, Heat Resistance, Good Mechanical Properties
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
jER™ YX4000
Polymer Name:
Epoxy Resins & Compounds
Functions:
Adhesion Promoter, Coupling Agent, Resin, Resins, Binders & Matrix Materials, Binder & Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Metal, Fibers & Fabrics, Glass, Plastics, Concrete, Steel, Ceramic
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
jER™ YL983U
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Resin, Binder & Resin
Chemical Family:
Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Bisphenol F Type Epoxy
End Uses:
Semiconductor Applications, Underfill
Compatible Substrates & Surfaces:
Aluminum, Plastics, Fibers & Fabrics, Ceramic, Glass, Concrete, Steel, Metal
Features:
Electrically Insulating, Good Electrical Properties, Low Chlorine Content, Chemical Resistance, Excellent Electrical Insulation, Chemical Resistant, Improved Dimensional Stability, Low Viscosity, Good Elastic Recovery, Reduced Wear, Water Resistant, Improved Flexibility, Water Resistance, Abrasion Resistance, Heat Resistance, Good Mechanical Properties
jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
jER™ 1750
Polymer Name:
Epoxy Resins & Compounds
Functions:
Adhesion Promoter, Resin, Coupling Agent, Resins, Binders & Matrix Materials, Binder & Resin
Chemical Family:
Epoxy & Epoxy Derivatives, Bisphenol F Type Epoxy, Bisphenol Epoxy Resins
Labeling Claims:
High Purity
jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
METABLEN™ SRK-200A
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyesters, Polyvinyl Chloride (PVC), Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC)
Processing Methods:
Injection Molding
METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
DURABIO™ D7340
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2700.0 - 2700.0 MPa
Labeling Claims:
Bisphenol A-free, Environmentally Friendly, Bio-based
DURABIO™ D7340 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.
Ketron® LSG CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Chemical Resistant, Wear Resistant, Creep Resistant, Steam Sterilizable, Biocompatible, Life Science Grade, Dimensional Stability, Gamma Sterilizable, Plasma Gas Sterilizable, X-Ray Sterilizable, Excellent Mechanical Strength, Ethylene Oxide Sterilizable, High Stiffness, Heat Sterilizable, Heat Resistance
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
9200.0 - 9200.0 MPa
Color:
Black
Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.
Forzeas™ HF9001
Polymer Name:
Polyester (unspecified)
Processing Methods:
Profile Extrusion, Extrusion, Extrusion Blow Molding (EBM)
Labeling Claims:
Recyclable, From Renewable Resources, Bio-based, Food Contact Acceptable, Environmentally Friendly, Biodegradable
Forzeas™ HF9001 has been certified as OK biodegradable MARINE, with a bio-based carbon content estimated at 90% or more according to ASTM D6866. It is designed for food contact applications, featuring good processability in existing general machines and superior heat resistance compared to other general bioplastics. Examples of its applications include straws for drinking.
Forzeas™ HA7004
Processing Methods:
Compounding, Injection Molding
Labeling Claims:
Biodegradable, Eco-friendly, Bio-based, Food Contact Acceptable
Density:
1390.0 - 1390.0 kg/m³
Forzeas™ HA7004 stands as an ideal choice for food contact injection molding applications. Successfully passing the OK compost Home test, this grade aligns with stringent environmental standards and has 80% or more bio-based carbon content calculated with reference to ASTM D6866 standard. This underscores its commitment to sustainability and makes Forzeas™ HA7004 a reliable option for applications where food contact safety is paramount.
DURABIO™ DT7043
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Labeling Claims:
Bisphenol A-free, Environmentally Friendly, Bio-based
DURABIO™ DT7043 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high impact strength and high heat resistance. It is suitable for injection mold.
Duratron® PEI U2300
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
High Strength to Weight Ratio, High Rigidity, Dimensional Stability, High Tolerance, Heat Resistance, Flame Retardant, Amorphous, Low Thermal Expansion, High Strength, Food Contact Acceptable, Low Odor, High Tensile Strength
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
5513.6 - 5513.6 MPa
Color:
Brown
Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!
Duratron® U1000 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods
Features:
Dimensional Stability, High Tolerance, Excellent Hydrolysis Resistance, Odorless, Excellent Dielectric Properties, Heat Resistance, Flame Retardant, Amorphous, High Strength, Food Contact Acceptable, Chemical Resistant
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Amber, Transparent
Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.
Ketron® LSG FG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Chemical Resistant, Steam Sterilizable, Biocompatible, Life Science Grade, Gamma Sterilizable, Plasma Gas Sterilizable, X-Ray Sterilizable, Excellent Mechanical Strength, Ethylene Oxide Sterilizable, High Stiffness, Heat Sterilizable, Heat Resistance
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Black, Beige
Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.
DURABIO™ D7342 (D7340-810)
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2700.0 - 2700.0 MPa
Labeling Claims:
Bisphenol A-free, Environmentally Friendly, Bio-based
DURABIO™ D7342 (D7340-810) is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.
DURABIO™ D6350
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Labeling Claims:
Bisphenol A-free, Environmentally Friendly, Bio-based
DURABIO™ D6350 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by good flow and is suitable for injection mold.
Ketron® LSG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Chemical Resistant, Steam Sterilizable, Biocompatible, Life Science Grade, Gamma Sterilizable, Plasma Gas Sterilizable, X-Ray Sterilizable, Excellent Mechanical Strength, Ethylene Oxide Sterilizable, High Stiffness, Heat Sterilizable, Heat Resistance
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Black, Blue, Red, Beige, Green, Yellow
Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.
Duratron® CU60 PBI
Polymer Name:
Polybenzimidazole (PBI)
Physical Form:
Rods, Plates, Tube
Features:
High Tolerance, Heat Resistance, Thermally Insulating, Odorless, Wear Resistant, High Loading Absorption Capability, Good Mechanical Properties
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Black
Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".
SHIKOH™ UV-3300B
Compatible Substrates & Surfaces:
Metal
SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Forzeas™ HA9010
Processing Methods:
Compounding, Sheet Molding
Labeling Claims:
Food Contact Acceptable, Biodegradable, Eco-friendly, Bio-based
Density:
1390.0 - 1390.0 kg/m³
Forzeas™ HA9010 represents a biodegradable and bio-based compound material specifically crafted for sheet molding applications. Successfully passing the OK compost Home test, this grade adheres to rigorous environmental standards and has 80% or more bio-based carbon content calculated with reference to ASTM D6866 standard. Tailored for food contact applications, it combines sustainability with versatility, making it a responsible and reliable choice for various uses where food contact safety is essential.
Forzeas™ HA7003
Processing Methods:
Injection Molding, Compounding
Labeling Claims:
Eco-friendly, Bio-based, Food Contact Acceptable, Biodegradable
Density:
1220.0 - 1220.0 kg/m³
Forzeas™ HA7003 is tailor-made for food contact injection molding applications, offering a reliable and sustainable solution. Having successfully passed the OK compost Home test, this grade meets stringent environmental standards and has 90% or more bio-based carbon content calculated with reference to ASTM D6866 standard. This underscores its commitment to high sustainability standards, making it a preferred choice for applications where food contact safety and eco-friendliness are paramount.
Forzeas™ HA9012
Processing Methods:
Compounding, Sheet Molding
Labeling Claims:
Food Contact Acceptable, Biodegradable, Eco-friendly, Bio-based
Density:
1390.0 - 1390.0 kg/m³
Forzeas™ HA9012 represents a breakthrough in environmentally conscious materials for sheet molding applications. This biodegradable and bio-based compound material has achieved certification from OK compost Home and has 80% or more bio-based carbon content calculated with reference to ASTM D6866 standard. Specifically designed for food contact applications, Forzeas™ HA9012 combines sustainability with versatility, making it a responsible choice for a range of uses.
DURABIO™ DT7010
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2400.0 - 2400.0 MPa
Labeling Claims:
Bio-based, Bisphenol A-free, Environmentally Friendly
DURABIO™ DT7010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and high impact strength. It is suitable for injection mold.