Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Mitsui Chemicals
All Mitsui Chemicals
Search products
Matching Product Categories
Plastics
Elastomers
CASE Ingredients
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
142 Products found on Mitsui Chemicals
Most Viewed
TDS
With TDS
MIPELON™ XM-220
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Compounding
Mitsui Chemicals MIPELON™ XM-220 Fine Particle Ultra High Molecular Weight Polyethylene Powder (UHMWPE Powder)MIPELON™ XM-220MIPELON™ is ultra-high molecular weight polyethylene in the form of fine powder developed by Mitsui Chemicals. While the average particle size of conventional ultra-high molecular weight polyethylene powder is 150 to 200 um, MIPELON™ can be successfully reduced to fine particles with an average particle size of 10 to 30 um by our special polymerization technology, as well as retaining its high molecular weight.Features: Abrasion resistance Easy dispersion properties Low water-absorption Food safety Applications: Modified resins and rubbers (compound) Self-lubricating materials (compound) Filters.
TPX® DX845
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Blow Molding, Fibers Extrusion, Film Extrusion, Injection Molding, Profile Extrusion
Melt Flow Index:
9.0 - 9.0 g/10 min
Mitsui Chemicals TPX® DX845 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ DX845: High Stiffness.TPX™ DX845TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
TPX® MX002
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Fibers Extrusion, Film Extrusion, Injection Molding, Profile Extrusion, Extrusion, Extrusion Coating, Blow Molding
Melt Flow Index:
21.0 - 21.0 g/10 min
Mitsui Chemicals TPX® MX002 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, extrusion, extrusion coating, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ MX002: Good Stiffness.TPX™ MX002TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
ADMER™ AT1955E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Blow Molding, Film Extrusion
Melt Flow Index:
2.6 - 2.6 g/10 min
ADMER™ AT1955E by Mitsui Chemicals is comprised of Polyethylene (unspecified) and Maleic Anhydride Grafted Polymer. It is commonly used
LUBMER™ L5220
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Injection Molding, Extrusion
Additives Included:
Lubricant (Unspecified)
Mitsui Chemicals LUBMER™ L5220LUBMER™ L5220 is a High Molecular Weight Polyethylene material. It is available in North America.Important attributes of LUBMER™ L5220 are: Flame Rated Lubricated Typical applications include: Engineering/Industrial Parts Automotive LUBMER™ L5220LUBMER is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc.. attracting attention as a high-performance material that will build a future.Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts
ADMER™ NF458A
Polymer Name:
Polyethylene (unspecified)
Processing Methods:
Blow Molding
ADMER™ NF458A is a Polyethylene material. It is available in North America for blow molding.Typical applications include: Adhesives/Tapes Bottles Plumbing/Piping/Potable Water
TPX® DX820
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Fibers Extrusion, Injection Molding, Extrusion Coating, Extrusion
Melt Flow Index:
180.0 - 180.0 g/10 min
Mitsui Chemicals TPX® DX820 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for extrusion coating, fiber (spinning) extrusion, or injection molding. Primary attribute of TPX™ DX820: High Stiffness.TPX™ DX820TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
MIPELON™ XM-221U
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Compounding
Mitsui Chemicals MIPELON™ XM-221U Fine Particle Ultra High Molecular Weight Polyethylene Powder (UHMWPE Powder)MIPELON™ XM-221UMIPELON™ is ultra-high molecular weight polyethylene in the form of fine powder developed by Mitsui Chemicals. While the average particle size of conventional ultra-high molecular weight polyethylene powder is 150 to 200 um, MIPELON™ can be successfully reduced to fine particles with an average particle size of 10 to 30 um by our special polymerization technology, as well as retaining its high molecular weight.Features: Abrasion resistance Easy dispersion properties Low water-absorption Food safety Applications: Modified resins and rubbers (compound) Self-lubricating materials (compound) Filters.
ADMER™ NF498E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Blow Molding, Film Extrusion
Melt Flow Index:
2.6 - 2.6 g/10 min
ADMER™ NF498E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
ADMER™ QF500A
Polymer Name:
Polypropylene (unspecified)
Processing Methods:
Film Extrusion
ADMER™ QF500A is a Polypropylene material. It is available in North America for blown film or cast film.Typical applications include: Adhesives/Tapes Sheet
APEL™ APL6509T
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion
Melt Flow Index:
30.0 - 30.0 g/10 min
Mitsui Chemicals APEL™ APL6509TAPEL™ APL6509T is a Cyclic Olefin Copolymer (COC) material. It is available in North America.Typical applications include: Film Sheet APEL™ APL6509TAPEL is a cyclo olefin copolymer (COC) developed by Mitsui Chemicals using Ziegler polymerization technology. Integration of the performance of polyolefin resins and that of amorphous resins enables control of heat resistance and fluidity. With the highest refractive index among amorphous polyolefins, it is low in optical anisotropy and extremely low in birefringence. Proven applications in optical plastic lenses. Excellent moisture-proof properties, chemical resistance and non-attachment characteristics that make it applicable as a medical packaging material. APEL's versatile functions and superior characteristics create new potential for transparent materials.Features: Optical characteristics Moisture-proofness Chemical resistance Dimensional stability Heat resistant stiffness Superior moldability Applications: Film Sheet
ADMER™ AT1870E
Polymer Name:
Polyethylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Injection Molding
Melt Flow Index:
15.0 - 15.0 g/10 min
ADMER™ AT1870E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
APEL™ APL8008T
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion
Melt Flow Index:
15.0 - 15.0 g/10 min
APEL™ APL8008T is a Cyclic Olefin Copolymer (COC) material. It is available in North America.Typical applications include: Film Sheet
TPX® RT18
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Extrusion, Fibers Extrusion, Film Extrusion, Injection Molding, Profile Extrusion
Melt Flow Index:
26.0 - 26.0 g/10 min
Mitsui Chemicals TPX® RT18 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for extrusion, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ RT18: High Stiffness.TPX™ RT18TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
TPX® RT18XB
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Extrusion, Fibers Extrusion, Film Extrusion, Injection Molding, Profile Extrusion
Melt Flow Index:
26.0 - 26.0 g/10 min
Mitsui Chemicals TPX® RT18XB is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for extrusion, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ RT18XB: High Stiffness.TPX™ RT18XBTPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
LUBMER™ L4000
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Injection Molding, Extrusion
Mitsui Chemicals LUBMER™ L4000LUBMER™ L4000 is a High Molecular Weight Polyethylene material. It is available in North America. Primary attribute of LUBMER™ L4000: Flame Rated.Typical applications include: Engineering/Industrial Parts Automotive LUBMER™ L4000LUBMER is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc.. attracting attention as a high-performance material that will build a future.Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts
ADMER™ QF551A
Polymer Name:
Polypropylene (unspecified)
Processing Methods:
Film Extrusion
ADMER™ QF551A is a Polypropylene material. It is available in North America for blown film or cast film.Typical applications include: Adhesives/Tapes Plumbing/Piping/Potable Water
ADMER™ NE062E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Extrusion
Melt Flow Index:
4.5 - 4.5 g/10 min
ADMER™ NE062E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
ADMER™ QF551E
Polymer Name:
Polypropylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Coating, Film Extrusion, Injection Molding
Melt Flow Index:
5.0 - 5.0 g/10 min
ADMER™ QF551E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polypropylene (unspecified). It is commonly used
APEL™ APL5514ML
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding, Extrusion
Melt Flow Index:
36.0 - 36.0 g/10 min
APEL™ APL5514ML is a Cyclic Olefin Copolymer (COC) material. It is available in North America.Typical application of APEL™ APL5514ML: Optics/Lenses
ADMER™ NF468E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Extrusion
Melt Flow Index:
4.0 - 4.0 g/10 min
ADMER™ NF468E by Mitsui Chemicals is comprised of Polyethylene (unspecified) and Maleic Anhydride Grafted Polymer. It is commonly used
TPX® MX004
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Fibers Extrusion, Film Extrusion, Injection Molding, Profile Extrusion, Extrusion, Blow Molding
Melt Flow Index:
25.0 - 25.0 g/10 min
Mitsui Chemicals TPX® MX004 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, extrusion, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ MX004: Good Stiffness.TPX™ MX004TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
ADMER™ QE800E
Polymer Name:
Polypropylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Coating, Film Extrusion
Melt Flow Index:
9.1 - 9.1 g/10 min
ADMER™ QE800E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polypropylene (unspecified). It is commonly used
APEL™ APL5014DP
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding, Extrusion
Melt Flow Index:
36.0 - 36.0 g/10 min
Mitsui Chemicals APEL™ APL5014DPAPEL™ APL5014DP is a Cyclic Olefin Copolymer (COC) material. It is available in North America.Typical application of APEL™ APL5014DP: Optics/LensesAPEL™ APL5014DPAPEL is a cyclo olefin copolymer (COC) developed by Mitsui Chemicals using Ziegler polymerization technology. Integration of the performance of polyolefin resins and that of amorphous resins enables control of heat resistance and fluidity. With the highest refractive index among amorphous polyolefins, it is low in optical anisotropy and extremely low in birefringence. Proven applications in optical plastic lenses. Excellent moisture-proof properties, chemical resistance and non-attachment characteristics that make it applicable as a medical packaging material. APEL's versatile functions and superior characteristics create new potential for transparent materials.Features: Optical characteristics Moisture-proofness Chemical resistance Dimensional stability Heat resistant stiffness Superior moldability Applications: Optical
LUBMER™ LS4140
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Injection Molding, Extrusion
Fillers Included:
Other Filler
Mitsui Chemicals Lubmer™ LS4140 is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc. attracting attention as a high-performance material that will build a future.Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts.
ADMER™ NF642E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Blow Molding, Film Extrusion
Melt Flow Index:
4.0 - 4.0 g/10 min
ADMER™ NF642E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
ADMER™ QF825E
Polymer Name:
Polypropylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Coating, Film Extrusion
Melt Flow Index:
22.8 - 22.8 g/10 min
ADMER™ QF825E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polypropylene (unspecified). It is commonly used
LUBMER™ L3000
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Injection Molding, Extrusion
Mitsui Chemicals LUBMER™ L3000LUBMER™ L3000 is a High Molecular Weight Polyethylene material. It is available in North America.Important attributes of LUBMER™ L3000 are: Flame Rated Good Processability Typical applications include: Engineering/Industrial Parts Automotive LUBMER™ L3000LUBMER is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc.. attracting attention as a high-performance material that will build a future.Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts
TPX® DX310
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Injection Molding, Extrusion Coating, Extrusion, Fibers Extrusion
Melt Flow Index:
100.0 - 100.0 g/10 min
Mitsui Chemicals TPX® DX310 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for extrusion coating, fiber (spinning) extrusion, or injection molding. Primary attribute of TPX™ DX310: Good Stiffness.TPX™ DX310TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
TPX® RT31
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Fibers Extrusion, Film Extrusion, Injection Molding
Melt Flow Index:
21.0 - 21.0 g/10 min
TPX® RT31 by Mitsui Chemicals is comprised of Polymethylpentene. It is commonly used
APEL™ APL6011T
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion
Melt Flow Index:
26.0 - 26.0 g/10 min
Mitsui Chemicals Apel™ APL6011T is a Cyclic Olefin Copolymer (COC) material that is available in North America and it typically used to make industrial parts. It was developed by Mitsui Chemicals using Ziegler polymerization technology. Integration of the performance of polyolefin resins and that of amorphous resins enables control of heat resistance and fluidity. With the highest refractive index among amorphous polyolefins, it is low in optical anisotropy and extremely low in birefringence. Proven applications in optical plastic lenses. Excellent moisture-proof properties, chemical resistance and non-attachment characteristics that make it applicable as a medical packaging material. APEL's versatile functions and superior characteristics create new potential for transparent materials.Features: Optical characteristics, Moisture-proofness, Chemical resistance, Dimensional stability, Heat resistant stiffness, Superior moldability.
ADMER™ NF377E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Coating, Film Extrusion
Melt Flow Index:
4.5 - 4.5 g/10 min
ADMER™ NF377E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
ADMER™ QB510E
Polymer Name:
Polypropylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Film Extrusion, Blow Molding
Melt Flow Index:
3.0 - 3.0 g/10 min
ADMER™ QB510E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polypropylene (unspecified). It is commonly used
TPX® DX560M
Polymer Name:
Polymethylpentene (PMP)
Processing Methods:
Injection Molding, Profile Extrusion, Blow Molding, Extrusion
Mitsui Chemicals TPX® DX560M is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, extrusion, injection molding, pipe extrusion, or profile extrusion.TPX™ DX560MTPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.
ADMER™ QF541E
Polymer Name:
Polypropylene (unspecified), Maleic Anhydride Grafted Polymer
Processing Methods:
Coating, Film Extrusion
Melt Flow Index:
5.0 - 5.0 g/10 min
ADMER™ QF541E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polypropylene (unspecified). It is commonly used
ADMER™ AT2138E
Polymer Name:
Maleic Anhydride Grafted Polymer, Polyethylene (unspecified)
Processing Methods:
Film Extrusion
Melt Flow Index:
3.2 - 3.2 g/10 min
ADMER™ AT2138E by Mitsui Chemicals is comprised of Maleic Anhydride Grafted Polymer and Polyethylene (unspecified). It is commonly used
Show
36
of 142 results
1
2
3
4