Products

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18045 WT1048-18 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and offers light scattering, translucent, easy release (demolding), and easy flow properties. It is ideal for automotive, lighting, and white panel-technology applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALTECH® PP-B A 2020/157 GF20 CP is a polypropylene heterophasic copolymer containing 20% glass fibers that is chemically coupled, processing stabilized, easy to release (demolding), and heat stabilized. It is typically used in building and construction for exterior parts such as air ducts and functional components. For optimal results, pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 h or in an air circulating dryer at 80-120°C for 2-4 h. For injection molding, the melt temperature should be set to 200-250°C and the mold temperature should be set to 20-70°C.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® LD2 PC 1000 16107 WT2641-15 is a polycarbonate base polymer with a UV-stabilized filler/additive system and light-scattering special features. It is suitable for the automotive and lighting market segments, and is commonly used for applications such as lamp covers, display elements, and operating elements. It has approvals from GS93016 and is recommended to be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR IM is a polycarbonate base polymer with features like UV stabilization, easy release, flame retardance, and impact modification. It is widely used in injection molded parts such as housings, security engineering parts, sockets, plugs, and connectors for the electrical and electronic and lighting industries.

MOCOM Compounds ALCOM® PA6 900/11 GF10 MR20 SV12-778MCF is a pre-dried polyamide 6 containing 10% glass fibers, 20% mineral, and has a silver, metallic effect. It has a low tendency to produce flow lines and low warpage, is highly heat-stabilized and is typically used for automotive and other applications such as housings and engine covers. It is processed by injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds TEDUR® L 9412-3.2 is a polyphenylene sulfide-based compound containing 10% carbon fibers, 10% graphite, and 10% PTFE. It is used in various industries such as automotive, machinery, electrical, and electronic industries for functional components, housings, bearings, and sliding elements. This compound has enhanced electrical conductivity, sliding, and wear due to its reduced surface resistivity. For pre-drying, a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content with a maximum moisture content of 0.02% should be used. For injection molding, a melt temperature of 320-340°C and a mold temperature of over 140°C is required.

MOCOM Compounds ALCOM® PC 740/4 UV WT1139-11LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and provides a translucent, light scattering, and high light diffusion. It is suitable for applications such as lamp covers, display elements, and operating elements and is approved by GS93016. The melt temperature for injection molding should be between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 RD1451-06LD is a polycarbonate base polymer with a special filler/additive system for light scattering, high light diffusion, and translucency. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALTECH® ECO PC 1000/170 is a polycarbonate base polymer that contains recycled material and has easy release (demolding) properties. It is suitable for injection molding with a melt temperature range of 270-310°C and a mold temperature range of 80-110°C, making it appropriate for automotive, lighting, and various other market segments. Commonly used for housing, automotive trim unpainted, and various other fixtures and fittings applications.

MOCOM Compounds ALCOM® PC 740/4 UV WT1445-06LD is a polycarbonate base polymer with a special filler/additive system for light scattering, UV stabilization, and easy flow. It is used for lamp covers, display elements, and operating elements in the automotive and lighting market segments, and is approved by GS93016.

MOCOM Compounds CELLIDOR® B 5111-10 is a polymeric material with a base polymer of Cellulose Acetate Butyrate and a filler-additive system of phthalate-free plasticiser. It is designed for use in injection molding and is processing stabilized, UV stabilized and weather stabilized, making it suitable for use in building and construction applications. It has good chemical resistance, high surface quality, high surface gloss, and good haptics. It is also suitable for use in thick-walled parts and has a high light transmission.

MOCOM Compounds ALCOM® PC 740/4 UV WT1296-07LD is a polycarbonate polymer with a special filler/additive system that is UV stabilized, has high light transmission and light scattering, and has good flow. It is used in the automotive and lighting industries for applications such as lamp covers, display elements, and operating elements. It has GS93016 approvals and is recommended to be stored dry and in the dark. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. It should also be noted that the recommended injection pressure is between 80-150 bar.

MOCOM Compounds ALCOM® ABS 530/29 SV1462-06MCO is a pre-drying condition Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect and special features of flow line optimization and easy flow. It is used for electrical and electronic, building and construction applications, such as household goods and housings. Its processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C.

MOCOM Compounds ALCOM® PC 740/1.1 CF20 is a polycarbonate base polymer filled with 20% carbon fibers that is electrically conductive, has reduced surface resistivity, high stiffness, and is heat stabilized. It is suitable for use in machinery and various other market segments, and is typically used in the injection molding of housings, functional components, and protection caps. To ensure optimal performance, pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of <0.02%. The melt temperature for injection molding should be between 290-330°C and the mold temperature should be between 80-130°C.

MOCOM Compounds ALCOM® PC 740/4 GY1262-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and good flow. It is approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is primarily used for automotive and lighting applications such as lamp covers, display elements, and operating elements. For long-term storage, it should be kept in a dry, light-protected environment.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.

MOCOM Compounds ALCOM® PP 620/1 WT1433-05LB is a polypropylene homopolymer with 8% special filler, 30% mineral, and highly reflective, opaque features. It is used in the automotive and lighting market segments for light guides, reflectors, and light blocking components. The processing for injection molding is done at a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE5 is a polyamide 66 base polymer with a special filler and additive system that provides thermal and electrical conductivity, as well as heat stabilization. It is mainly used for automotive, machinery, electrical and electronic, and lighting applications like electrical components, radiator systems, and cooling systems such as housings and functional components. To ensure optimal performance, it should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours, with a maximum moisture content of 0.12%. For injection molding, the melt temperature should be between 300-320°C and the mold temperature should be between 100-130°C.

MOCOM Compounds ALCOM® PC 740/4 GY1122-04LD is a polycarbonate base polymer with a special filler/additive system, featuring light scattering and high light diffusion, as well as good flow. It is used in automotive and lighting applications for lighting, light transparent components such as lamp covers, display elements, and operating elements. It has GS93016 approvals and is recommended to be pre-dried before injection molding processing at 270-310°C with a mold temperature of 80-110°C for best results.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® HP PBT 5262 18051 is a high-density, heat-stabilized, and high-acoustic damping polybutylene terephthalate with a 62% glass fiber/mineral filler/additive system. It is used for injection-molded parts in the automotive market, such as housings and functional components, with a melt temperature of 270-290°C and a mold temperature of 80-120°C. To ensure optimal performance, it should be stored in a dry place, protected from light.

MOCOM Compounds ALCOM® CFX ASA 5010 WP 16014 SV1019-16MC is a pre-dried Acrylonitile/Styrene/Acrylate/Copolymer containing 10% PTFE with a metallic effect, improved sliding/wear and low tendency to flow lines. It is used in the machinery market segment for injection molded parts such as bearings and sliding elements. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours, and 80°C in an air circulating dryer for 3-6 hours depending on the moisture content. The melt temperature for injection molding is 240-280°C and the mold temperature is 40-80°C. For optimal performance, it should be stored in a cool, dry, and dark place.

MOCOM Compounds ALCOM® PC 740/4 UV WT1082-08LD2 is a polycarbonate-based polymer with a special filler/additive system that is UV stabilized, translucent, light-scattering, and has high light diffusion and good flow. It is typically used in automotive and lighting applications for lamp covers, display elements, and operating elements. It has been approved by GMW15702, GM3013, and GS93016 and should be processed using injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® AWL 10/3 WT1308-05LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer that is opaque, highly reflective, heat stabilized, and has easy flow. It is suitable for markets such as Automotive and various application areas like lighting and light blocking components. Typical applications include light guides and reflectors.

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds ALCOM® PC 740/1.1 CF10 GF20 is a base polymer of polycarbonate with 10% carbon fibers and 20% glass fibers. It is electrically conductive, has reduced surface resistivity and provides high stiffness, making it suitable for use in the automotive and machinery markets. It is applicable to various applications such as housings and functional components. When processing injection molding, the melt temperature should be between 290-330°C and the mold temperature should be between 80-130°C. Additionally, the product should be stored in a dry environment, protected from light.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16059 CC1059-16 is a polycarbonate base polymer containing a special filler/additive system, UV stabilized, which provides high light transmission, light scattering, and high light diffusion, with easy flow. It is suitable for automotive and lighting market segments and is typically used for light diffusing panels, light diffusers, and lamp covers.

MOCOM Compounds ALCOM® LDX PC 1000 UV 14062 WT1140-14 is a translucent, light-scattering extrusion grade polycarbonate with a special filler and UV stabilized additive system. It is suitable for applications such as lighting, light-transparent components, and lamp covers. Pre-drying involves 120°C in a dry air (dessiccant) dryer for 2-4 hours, or 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of less than 0.02%. Processing requires a melt temperature of 240-280°C and should be protected from light.

MOCOM Compounds ALCOM® PC 740/4 GY1320-04LD is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, and high light diffusion properties, as well as good flow. It is approved by GS93016 and is suitable for use in automotive and lighting applications such as lamp covers, display elements, and operating elements. Processing injection molding temperature ranges from 270-310°C, with a mold temperature of 80-110°C. To ensure proper performance, this material must be stored in a dry, light-protected environment.

MOCOM Compounds Alcom® CFX ABS 1000 16012 SV1017-16MC is a metallic-effect acrylonitrile/butadiene/styrene copolymer base polymer, designed for injection-molded parts, particularly housings. Prior to processing, it requires pre-drying in a dry air (dessiccant) dryer at 80°C for 2-4 hours or in an air circulating dryer for 3-6 hours, depending on the moisture content.