Products

CoatOSil™ MP 200 silane promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates. Condensation of its silanol groups can also provide crosslinks between polymer chains.

Silquest™ VS-604 silane typically provides excellent performance in the potentially cost-effective production of moisture crosslinkable silylated polyolefin compounds. It is a modified vinyltrimethoxysilane that may be considered for use in the manufacture of pipe, wire and cable and industrial goods.

Silquest™ A-178 silane is a coupling agent for glass fiber and particulate filler reinforced composites. It is a 100% active methacrylamido functional silane that may be used to promote adhesion between a wide range of resins and substrates and reinforcements. It is also useful as a monomer in the synthesis of organic polymers. It functions as a moisture- activated crosslinking agent.

Silquest™ A-171 silane offers vinyl and silane functionality and also can be utilized for chain extension of RTV silicones or OH functional polymers. This results in Si-O-Si crosslink sites that are highly resistant to the effects of exposure to moisture, chemicals and UV rays. As a siloxane crosslinker, Silquest™ A-171 silane typically does not generate color and is resistant to acid rain under most conditions. This silane is also useful as a moisture scavenger in moisture cure systems where improved shelf life is desired.

Enhancing the physical properties of water-borne dispersion polymers, such as polyurethane and acrylic latexes, CoatOSil™ 2287 silane enables the formulation of coatings with good shelf stability, improved wet adhesion and enhanced resistance to water and organic solvents. This non-yellowing additive can be considered as an adhesion promoter or crosslinker.

Silquest™ A-Link 25 silane and Silquest™ A-Link 35 silane are unique isocyanate functional silanes. The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most active hydrogen containing compounds. The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates.

Silquest™ A-189 silane chemically bonds reinforcing minerals such as silica, clay, mica and talc to the polymer matrix. This silane is especially useful in sulfur-cured and metal oxide-cured elastomers. It can be used as a pretreatment on minerals or added at the time of compounding.Improvement in mineral-filled elastomer properties, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time may be achieved with Silquest™ A-189 silane (gamma-mercaptopropyltrimethoxysilane).

Silquest™ A-Link 15 silane may be used for use as an endcapper or crosslinker for isocyanate functional prepolymer systems. This product provides improved thermal and UV stability over previous secondary amino silane endcappers. Silquest™ A-Link 15 silane can also be utilized as an adhesion promoter in silicone, hybrid, urethane, and epoxy adhesives and sealants.

Silquest™ Y-11699 silanes are secondary aminofunctional bis-silanes. This category of silanes is generally useful to consider for a broad range of applications to promote adhesion in coatings, adhesives and sealants between organic polymers and glass, metal, wood or cast plastic substrates.

Silquest™ A-1106 silane is an aqueous solution of an aminoalkyl siloxane. This alcohol-free siloxane improves signifi- cantly the adhesion and coupling between organic resins and inorganic surfaces. Momentive Performance Materials Silquest™ A-1106 silane is most often used in aqueous systems where the alcohol of hydrolysis causes instability of the formulation or where a high flash point additive is required. The product also reduces volatile organic content (VOC) and does not contain hazardous air polluting substances (HAPS). These benefits are particularly useful to manufacturers seeking to reduce emissions from their water-borne products and processes.

CoatOSil™ 1770 silane can benefit from better adhesion, improved appearance, and longer retention of functional and esthetic properties. As a cycloaliphatic epoxy silane, CoatOSil™ 1770 silane can deliver crosslinking in latex under room or elevated temperature cure conditions. Through crosslinking, CoatOSil™ 1770 silane can improve the solvent, stain and weather resistance of the final coating.

SPUR+™ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required.

Silquest™ A-1871 Epoxy Silane is a gamma-Glycidoxypropyltriethoxysilane. Acts as adhesion promoter. This epoxy functional silane provides outstanding chemical resistance, mechanical properties, improved adhesion to glass and metal substrates. It also provides crosslinking of waterborne latexes and dispersions; acrylic, styrene acrylic or other copolymers, polyurethane or epoxy dispersions. Has enhanced electrical properties of epoxy based electronic encapsulants and packaging materials, resulting from improved bonding between resin, substrate or filler. Improved wet adhesion reduces the risk of semiconductor or integrated circuit failure as a result of water ingress or surface corrosion. It also has improved dry adhesion and tensile strength. Use of epoxy silane may avoid the yellowing sometimes seen when amino functional adhesion promoters are used and it also has improved shelf stability over aminosilane alternatives. It is used in caulking applications.

SPUR+™ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required.

Silquest™ A-1170 is a Amino bis-silanes can be effective in reacting with epoxy, urethane, melamine, polyimide, phenolic and furan thermosetting resins, as well as many thermoplastics, such as polyamides and polyesters. Silquest™ A-1170 silane offers a fast cure time and/or rapid adhesion build. Because of its higher purity grade, Silquest™ A-1170 silane is an excellent candidate to consider for use in applications that demand low color and greater control of reaction stoichiometry. Silquest™ A-1170 silane is a versatile silane, and it may be added directly to polymers during system formulation or used independently as a primer.

Silquest™ Y-9627 is secondary aminofunctional bis-silanes. This category of silanes is generally useful to consider for a broad range of applications to promote adhesion in coatings, adhesives and sealants between organic polymers and glass, metal, wood or cast plastic substrates. Typically, they can function as coupling agents to particulate mineral fillers in composites, as in foundry molds and cores, to improve mechanical properties such as tensile and flexural strengths. These property improvements have been maintained in the presence of aggressive environments, such as high temperature and high humidity conditions.

Silquest™ A-151 silane (vinyltriethoxysilane) is a general-purpose coupling agent used with mineral-filled polyolefin and elastomeric compounds. Silquest™ A-151 silane can be added as a monomer during emulsion polymerization to form silane-modified latexes that function as crosslinkers, forming very stable Si-O-Si linkages.

Silquest™ A-1110 silane, a primary amino silane, is a candidate for use as an adhesion promoter in silane modified urethane (SPUR* prepolymer), filled silicone, epoxy and 2 part urethane adhesives and sealants.

Silquest™™ A-171J is a generating high performance durable bonds generating covalent bonds between two different materials or two molecules of the same material is one way to raise the performance of these systems whether the desired enhancement is better adhesion improved chemical, scrub or corrosion resistance superior mechanical or electrical properties or longer lasting durability. Our customers have employed our family of Silquest™ silanes for just such an array of benefits. Versatile and possessing the ability to react with a wide variety of organic and inorganic materials, Silquest™ silanes work effectively as coupling agents, crosslinking agents and surface modifiers. Silquest™ silanes have been used in high strength crosslinked plastics, easily dispersed fillers, and resilient adhesives and coatings.

SPUR+™ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor.

SPUR+™ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+™ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. SPUR+™ 1012 prepolymer can help enable the formulation of non-staining, paintable sealants.