Products

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Silquest™ A-1120N(beta-aminoethyl) gamma-aminopropyltrimethoxy-silane is diamino func tional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

Silquest™ A-Link 15 silane may be used for use as an endcapper or crosslinker for isocyanate functional prepolymer systems. This product provides improved thermal and UV stability over previous secondary amino silane endcappers. Silquest™ A-Link 15 silane can also be utilized as an adhesion promoter in silicone, hybrid, urethane, and epoxy adhesives and sealants.

CoatOSil™ 1770 silane can benefit from better adhesion, improved appearance, and longer retention of functional and esthetic properties. As a cycloaliphatic epoxy silane, CoatOSil™ 1770 silane can deliver crosslinking in latex under room or elevated temperature cure conditions. Through crosslinking, CoatOSil™ 1770 silane can improve the solvent, stain and weather resistance of the final coating.

Silquest™ A-1106 silane is an aqueous solution of an aminoalkyl siloxane. This alcohol-free siloxane improves signifi- cantly the adhesion and coupling between organic resins and inorganic surfaces. Momentive Performance Materials Silquest™ A-1106 silane is most often used in aqueous systems where the alcohol of hydrolysis causes instability of the formulation or where a high flash point additive is required. The product also reduces volatile organic content (VOC) and does not contain hazardous air polluting substances (HAPS). These benefits are particularly useful to manufacturers seeking to reduce emissions from their water-borne products and processes.

Silquest™ A-1120, N(beta-aminoethyl) gamma-aminopropyltrimethoxy- silane, and Silquest™ A-2120, N(beta-aminoethyl) gamma aminopropylmethyldimethoxy-silane, are diaminofunctional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

CoatOSil™ 77 coatings additive. It generally promotes a uniform finish and its air-release capacity can help to minimize defect formation. In addition, it can enable formulations to generate exceptionally low surface tensions - even when used in low dosages.

CoatOSil™ 1211C coatings additive helps enable wetting of waterborne systems on common and hard-to-wet substrates. The product's nonfoaming characteristics and superwetting properties make it an excellent candidate to consider for coatings applied by spray or high-speed roll methods. CoatOSil™ 1211C coatings additive applications may include coatings for plastic films and components, wood and glass coatings. May improve results on less than optimal prepared surfaces.

Silquest™ A-1170 is a Amino bis-silanes can be effective in reacting with epoxy, urethane, melamine, polyimide, phenolic and furan thermosetting resins, as well as many thermoplastics, such as polyamides and polyesters. Silquest™ A-1170 silane offers a fast cure time and/or rapid adhesion build. Because of its higher purity grade, Silquest™ A-1170 silane is an excellent candidate to consider for use in applications that demand low color and greater control of reaction stoichiometry. Silquest™ A-1170 silane is a versatile silane, and it may be added directly to polymers during system formulation or used independently as a primer.

Silquest™ A-Link 597 silane functions as an adhesion promoter for a variety of substrate/matrix resin combinations. It is especially useful in high performance hot melt adhesives and other applications where exposure to sustained temperatures might occur.

Silquest™ A-1110 silane, a primary amino silane, is a candidate for use as an adhesion promoter in silane modified urethane (SPUR* prepolymer), filled silicone, epoxy and 2 part urethane adhesives and sealants.

SPUR+™ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+™ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. SPUR+™ 1012 prepolymer can help enable the formulation of non-staining, paintable sealants.