Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Browse
Sample
Chat
Request
Search
category
CASE Ingredients
category
Additives
category
Foam Control
Products
Munzing
All Munzing
Search products
Applications
Functions
Compatible Polymers & Resins
End Uses
Chemical Family
All Filters
118 Products found on Munzing in
Foam Control
Most Viewed
SDS
With SDS
TDS
With TDS
AGITAN® 109
Functions:
Defoamer
Chemical Family:
Silica, Blends & Combinations
End Uses:
Waterborne Ink, Waterborne Coating, Waterborne Adhesive
Labeling Claims:
Silicone-free, Bio-based
AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.
AGITAN® 282
Functions:
Defoamer
Chemical Family:
Mineral Oils, Blends & Combinations
End Uses:
Waterborne Ink, Waterborne Coating, Waterborne Adhesive
Labeling Claims:
Silicone-free
AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.
AGITAN® DF 6420
Chemical Family:
Blends & Combinations
Functions:
Defoamer
End Uses:
Solventborne Adhesive, Solventborne Ink, Solventborne Coating
Labeling Claims:
Solvent-free
Synonyms:
Pimelic Ketone
AGITAN DF 6420 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily disperses in most organic solvents.
AGITAN® 120
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Ink
AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.
AGITAN® 218
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Adhesive
AGITAN 218 is a defoamer for all common emulsion systems.
AGITAN® 350
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive, Waterborne Ink
Labeling Claims:
Silicone-free
AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.
AGITAN® A203E
Functions:
Defoamer
Chemical Family:
Blends & Combinations
only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.
AGITAN® 731
Functions:
Defoamer
Chemical Family:
Silicones, Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive, Waterborne Ink
AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.
AGITAN® P 803
Functions:
Defoamer
AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.
AGITAN® 701
Functions:
Defoamer
Chemical Family:
Silicones, Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive, Waterborne Ink
AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.
AGITAN® 703 N
Functions:
Defoamer
Chemical Family:
Blends & Combinations
AGITAN 703 N is designed specifically for finely dispersed emulsions (hydrosols), water reducible systems and gloss emulsion paints.
LUBRANIL® RN 20
Solid Content:
19.0 - 21.0 %
LUBRANIL® RN 20 is a water based dispersion for pasty plasters and waterborne dispersion paints. LUBRANIL® RN 20 is very suitable for polymeric, silicate and silicone based systems.
AGITAN® 295
Functions:
Anti-Foaming Agent, Defoamer
Chemical Family:
Mineral Oils, Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive
Labeling Claims:
Silicone-free
AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.
AGITAN® 265
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive
Labeling Claims:
Silicone-free
AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.
AGITAN® 155
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Ink
AGITAN 155 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 155 is resistant to alkaline environment. It can be used between pH 6 and 11.
DEE FO® 1015
Functions:
Defoamer
End Uses:
Waterborne Adhesive
DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.
AGITAN® 105
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Ink
AGITAN 105 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.
CERETAN® MA 7150
Functions:
Slip Agent, Anti-Blocking Agent, Defoamer
Chemical Family:
Waxes
End Uses:
Paper & Pulp, Ceramics
CERETAN® MA 7150 is a Micronized Erucamide wax. This Product is uses as a good antiblocking, excellent slip properties, good recoatability and wet printing properties, defoamer in the production of paper and cardboard, surface lubricant for the metal production.
AGITAN® DF 6686 W
Functions:
Defoamer
Labeling Claims:
APEO-free
AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.
METOLAT® 285
Functions:
Defoamer, Wetting Agent
Labeling Claims:
Other Labeling Claims, Mineral oil-free
End Uses:
Waterborne Ink, Waterborne Adhesive, Waterborne Coating
Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.
AGITAN® 305
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive
AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.
AGITAN® 156
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Ink
AGITAN 156 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 156 can be used in pigmented and non-pigmented water based systems. AGITAN 156 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.
AGITAN® P 801
Functions:
Defoamer
AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN® DF 681 F
Functions:
Defoamer
Labeling Claims:
APEO-free
AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.
AGITAN® DF 311 M
Functions:
Defoamer
Chemical Family:
Silicones
End Uses:
Solventborne Adhesive, Solventborne Ink, Solventborne Coating
Compatible Polymers & Resins:
Epoxies (EP), Polyesters
Labeling Claims:
Solvent-free
AGITAN DF 311 M is a defoamer for all common solvent based systems. It provides the following properties: Controls foaming and aeration during paint manufacture, filling and application; Low viscosity for easy dispersibility; Good compatibility in a wide range of solvent-borne systems; Long lasting efficiency.
AGITAN® 352
Functions:
Defoamer
Chemical Family:
Blends & Combinations
End Uses:
Waterborne Coating, Waterborne Adhesive
AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.
AGITAN® 526
Functions:
Defoamer
AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.
AGITAN® A203
Functions:
Defoamer
Chemical Family:
Blends & Combinations
Only available in Asia! A workhorse and cost-effective oil-based defoamer for architectural coatings including trade sales. Can also be selected as an economical defoamer choice during the grind stage.
AGITAN® 232
Functions:
Defoamer
Chemical Family:
Blends & Combinations
AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.
FOAMTROL 10L
Functions:
Defoamer
Chemical Family:
Blends & Combinations
FOAMTROL 10L is a versatile, low viscosity and stable silicone emulsion effective in floor care products, wood coatings, lens polishes and in tank-side, non-FDA applications.
CERETAN® MA 7008
Functions:
Defoamer, Flattener
Chemical Family:
Waxes
Features:
Improved Slip, Blocking Resistance
CERETAN® MA 7008 is a Micronized ethylene-bis-stearamide-wax [EBS]. This product is used as matting agent, degassing agent for powder coatings and improving slip and anti blocking properties.
AGITAN® P 840
Functions:
Defoamer
AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN® 315
Functions:
Defoamer
Chemical Family:
Blends & Combinations, Mineral Oils
End Uses:
Waterborne Coating, Waterborne Adhesive, Waterborne Ink
Compatible Polymers & Resins:
Synthetic Rubbers
Labeling Claims:
Silicone-free
AGITAN 315 is recommended for aqueous emulsion systems specifically for low odor formulations, architectural coatings, emulsion plasters, industrial and wood coatings, printing inks, adhesives and cleaners. It is compatible with all common binders.
AGITAN® P 833
Functions:
Defoamer
AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN® E 255
Functions:
Defoamer
End Uses:
Waterborne Coating
AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.
AGITAN® 299
Functions:
Defoamer
End Uses:
Waterborne Coating, Waterborne Adhesive
Labeling Claims:
Other Labeling Claims
AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.
Show
36
of 118 results
1
2
3
4