Products

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

TAFIGEL PUR 45 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 45 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 45 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 45 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, emulsion plasters, adhesives, printing inks and joint fillers.

TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

METOLAT® P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

METOLAT® P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

SÜDRANOL® 567 is a wax-compound-emulsion, specially developed for the aqueous wood coating sector.This product improves water resistance Improves antiblocking Improves scuff- and scratch resistance Improves slip surface APEO free. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

TAFIGEL PUR 48 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 48 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 48 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

TAFIGEL PUR 61 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 61 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 61 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

METOLAT SC-43 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

TAFIGEL PUR 64 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 64 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 64 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

AGITAN DF 6575 GM is a defoamer for all common emulsion systems. It provides the following properties which is extremely versatile, good compatibility, effective over a wide pH range.

AGITAN® DF 6027 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams retains high efficiency.

SÜDRANOL® 340 is a waterbased polyethylene wax-compound-dispersion for use in paint- and varnish-systems. Properties and advantages are Improves water resistance Improves antiblocking Improves scuff- and scratch resistance Improves rub resistance Improves slip properties APEO-free. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

METOLAT 364 is a APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.Main applications as Drawing, Stamping, Corrosion protection, Grinding, Forging and Forming

AGITAN DF 2553 is a defoamer for all common emulsion systems. It provides the following properties Excellent compatability in concentrated metal working fluids and lubricants, Retains efficiency after prolonged storage in the concentrates, High efficiency in diluted fluids, No effect on the emulsion characteristics of fluids, Non-ionic character.

AGITAN DF 6681 is a defoamer for all common emulsion systems. It provides the following properties which Controls foaming and aeration during paint manufacture, filling and application, Good compatibility, Effective over a wide range of pH and temperature, Contains hydrophobic silica, Long lasting efficiency, Forms very stable emulsions in water, Retains high efficiency.

METOLAT SC-40 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

TAFIGEL PUR 52 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 52 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 52 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and putties.

AGITAN DF 6236 M is a defoamer for all common emulsion systems. It provides the following properties which retains high efficiency, stable over a wide pH range, good compatibility.

AGITAN DF 677 is a defoamer for all common emulsion systems. It provides the following properties: Extremely versatile; Good compatibility; Effective over a wide pH range.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

AGITAN DF 6685 is a defoamer for all common emulsion systems. It provides foam control and de-aeration during paint manufacture, filling and application, Extremly cost effective, High persistance, Good compatibility.

AGITAN DF 6421 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily dispersable in most organic solvents

SÜDRANOL® 200 is a waterbased polyethylene wax-compounddispersion for use in paint- and varnish-systems especially in gloss dispersion, lacquers and glazes. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN DF 6698 is an emulsion with excellent stability and defoaming persistency. Properties and advantages of AGITAN DF 6698 are Controls foaming and de-aeration during paint manufacture, filling and application Extremely cost effective, Good compatibility with a wide range of systems, Long lasting efficiency.

AGITAN DF 691 is a defoamer for all common emulsion systems. It provides the following properties that retains high efficiency, extremely versatile, good compatibility, effictive over a wide range of pH and temperature.

MUNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT® 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.