Products

EDAPLAN LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.

AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

AGITAN 271 is a special composition with excellent stability and high efficiency. AGITAN 271 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

METOLAT® 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and leveling. The product is VOC free according to 2004/42/EC.

AGITAN 315 is recommended for aqueous emulsion systems specifically for low odor formulations, architectural coatings, emulsion plasters, industrial and wood coatings, printing inks, adhesives and cleaners. It is compatible with all common binders.

METOLAT 365 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 365 improves substrate and pigment wetting. It shows a very broad pH stability.

AGITAN 260 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 260 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

A Silcone-free and mineral-oil free foam control agent specially designed for powder and PCB cleaner formulations.

METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It provides the following properties: Effective in hard or soft water up to 100°C; Effective over a wide pH range

EDAPLAN LA 402 is suitable for all aqueous coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems.

EDAPLAN LA 403 is suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems.

METOLAT® 367 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and leveling. METOLAT® 367 is specifically suitable for systems in contact with food. The product is VOC free according to 2004/42/EC.

AGITAN 230 is a highly effective defoamer for aqueous emulsion based and water reducible systems. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity systems. In low viscosity systems AGITAN 230 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

A workhorse and cost-effective oil-based defoamer for architectural coatings including trade sales. Can also be selected as an economical defoamer choice during the grind stage.