Products

AGITAN DF 691 is a defoamer for all common emulsion systems. It provides the following properties that retains high efficiency, extremely versatile, good compatibility, effictive over a wide range of pH and temperature.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

AGITAN 655 is an easily emulsifiable defoamer which can be used in pigmented as well as in clear and low viscosity systems. AGITAN 655 is an universal defoamer which is effective in all common aqueous emulsion systems and water reducible systems.

AGITAN DF 6002 is a defoamer for all common emulsion systems. It provides the following properties which Controls foaming and aeration during paint manufacture, filling and application, very fast bubble break, highly effective even at low concentrations, effective over a wide range of pH and temperature, and long lasting efficiency.

FOAMTROL 10L is a versatile, low viscosity and stable silicone emulsion effective in floor care products, wood coatings, lens polishes and in tank-side, non-FDA applications.

METOLAT N 50 is an aqueous dispersion of hydrophobic compounds which is easy to emulsify in water. METOLAT N 50 leads to an extension of the open-time of waterbased emulsion paints.

AGITAN 361 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems. Due to its high emulsifiability in water the defoamer is ideal for clear coats, non-pigmented and low viscous systems and emulsion manufacturing.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

AGITAN DF 6432 is a defoamer for all common emulsion systems. It provides the following properties which Extremely versatile, Very fast action, Non silicone based, Effective under acidic and alkaline conditions.

An industry standard that provides formulators with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. DEE FO PI-40 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives.

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

AGITAN 103 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

AGITAN 650 is an easily emulsifiable defoamer which can be used in pigmented as well as in clear and low viscosity systems. AGITAN 650 is an universal defoamer which is effective in all common aqueous emulsion systems and water reducible systems.

OMBRELUB 730 is a stable emulsion of fatty derivates. It is easily miscible with water at all ratios. In emulsion based plasters OMBRELUB 730 leads to a prolongation of open-time and a reduction of cracks. Processing properties are improved.

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

AGITAN® DF 6029 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams, retains high efficiency.

METOLAT 365 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 365 improves substrate and pigment wetting. It shows a very broad pH stability.

AGITAN DF 6681 is a defoamer for all common emulsion systems. It provides the following properties which Controls foaming and aeration during paint manufacture, filling and application, Good compatibility, Effective over a wide range of pH and temperature, Contains hydrophobic silica, Long lasting efficiency, Forms very stable emulsions in water, Retains high efficiency.

AGITAN 307 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

AGITAN DF 581 B is a defoamer for all common emulsion systems. It provides the following properties that is Extremely versatile, very fast action, non silicone based, Effective under acidic and alkaline conditions.

AGITAN® DF 6027 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams retains high efficiency.

AGITAN E 256 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

AGITAN DF 677 is a defoamer for all common emulsion systems. It provides the following properties: Extremely versatile; Good compatibility; Effective over a wide pH range.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

AGITAN 150 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 150 is resistant to alkaline environment. It can be used between pH 6 and 11.

AGITAN 381 is a highly effective, low-emmision defoamer and has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, pigmented systems, low viscosity systems and emulsion manufacturing.

OMBRELUB RA shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. The release effect maintains also during storage at elevated temperature. As OMBRELUB RA is nearly colorless it can be perfectly used in clear coats and white lacquers.

AGITAN DF 6685 is a defoamer for all common emulsion systems. It provides foam control and de-aeration during paint manufacture, filling and application, Extremly cost effective, High persistance, Good compatibility.

METOLAT SC-43 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

DEE FO SC-11 is an excellent low viscosity siloxane compound suitable for agricultural applications. It is readily pourable and may be used to prepare silicone-based foam preventive emulsions.

AGITAN 703 N is designed specifically for finely dispersed emulsions (hydrosols), water reducible systems and gloss emulsion paints.

AGITAN DF 6575 GM is a defoamer for all common emulsion systems. It provides the following properties which is extremely versatile, good compatibility, effective over a wide pH range.