Teldene - R25MLT - NATPET - RCP - Injection Molding

Identification & Functionality

Features & Benefits

Labeling Claims: Food Contact Acceptable
Materials Features: Biocompatible,
Broad Processing Window,
Dimensional Stability,
Excellent Transparency Properties,
Food Contact Acceptable,
Good Organoleptic Properties,
Low Energy Consumption,
Shorter Cycle Time,
Superior Clarity
Key Characteristics: Organoleptically suitable for food contact

Excellent transparency and dimensional stability

Nucleated & Anti-static additivated random copolymer

Potential for energy and cycle time saving

Suitable for defined medical/pharma-packing applications, subject to NATPET approval

Food contact approval for specific applications (refer to NATPET)
Special Features: Amazing result on transparent articles

Shows broad processing window while providing excellent clarity at low molding temperature

Tested for biocompatibility, ISO 10993-4,5,10,11 (refer RCPD)

Tested for VDA 270 compliance (refer RCPD)

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Printing & Packaging
Applications: Automotive & Transportation — Automotive
Aftermarket Parts & Components
Consumer Goods — Housewares
Consumer Goods — Other Consumer Goods Applications
Printing & Packaging — Packaging
Food & Beverage Packaging,
Non-Food Consumer Packaging
Plastics & Elastomers End Uses: Caps,
Closures
Plastics & Elastomers Processing Methods: Injection Molding
Typical Applications: Suitable for thin walled injection molding (TWIM) applications

Used for the production of house wares, thin walled articles for food and non-food applications, video

cassette cases, caps and lids, sports, leisure & toys and component parts for automotive industry

Processing Methods

Injection Molding, TWIM
Processing Conditions: Average extruder temperature range may be kept between 190 - 270°C.

Properties

	Value	Units	Test Method / Conditions
Density 23°C	0.9	g/cm³	ISO 1183
Melt Flow Rate (MFR) 230°C/2.16 kg	25	g/10-min	ASTM D 1238-13
Flexural Modulus	1200	MPa	ISO. 178
Tensile Stress at Yield 50-mm/min	29	MPa	ISO 527
Tensile Strain at Break 50-mm/min	min. 50	%	ISO 527
Tensile Strain at Yield 50-mm/min	17	%	ISO 527
Charpy Un-notched 23 °C, Type 1, Edgewise	200	KJ/㎡	ISO.179
Charpy Un-notched O °C, Type 1, Edgewise	70	KJ/㎡	ISO 179
Charpy notched ,23 °C, Type 1, Edgewise	6	KJ/㎡	ISO 179
Charpy notched ,O °C, Type 1, Edgewise	3	KJ/㎡	ISO 179
Heat Deflection Temperature 0.45 MPa Un-annealed	76	°C	ISO 75B
Vicat Softening Temperature A50 (50°C/h 10N)	130	°c	ISO 306
Tensile Modulus 1-mm/min	1150	MPa	ISO 527
IZOd Notched 23°C	5.4	KJ/㎡	ISO 180
Haze 1.0mm	6	%	ASTM D 1003

Regulatory & Compliance

Food Regulations: This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.

Storage & Handling

Storage and Handling: Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received.

Teldene® R25MLT