Products

Redicote E-6100 is a emulsifier for anionic bitumen and oil emulsions for tack coat, prime, dust oil and similar applications.

Adsee 900 is an alcohol ethoxylate and used both as in can and tank-mix applications globally.

Ethylan NS-500LQ is a non-ionic surfactant, polyalkoxylated butyl ether.

Alcogum L 265 is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals. It is an acrylate-based emulsion copolymer supplied at 30% active solids in water. This product is part of a unique line of hydrophobically modified, alkali soluble emulsion polymers typically referred to as HASE thickeners.

Lankropol KPH70 is a sodium di-octyl sulphosuccinate in MPG/water

AG 6202 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

Ethylan 995 is an alkyl alcohol alkoxylate where in-can adjuvant and superior with triazoles.

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

AG 6210 is a non-ionic surfactant, alkyl glucoside. It is based on a blend of short chain fatty alcohols and glucose. AG 6210 soluble in water and propylene glycol and dispersible in 2-propanol. It can be used as a: Corrosion inhibitor Dispersing agent Foam booster Degreaser

ELFACOS ST 37 are unique polyalkalene glycols which have excellent stabilizing effect on emulsions. Having a high capacity to absorb water and oil, a relatively low percentage is needed in cosmetic formulations. The stabilizing effect is not obtained by thickening, allowing for low viscous stable emulsions to be achieved. As nonionic copolymers, Elfacos ST 9 and Elfacos ST 37 polyalkylene glycol derivatives are hydrolytic, pH and electrolyte stable over a very wide temperature range. In decorative cosmetics, they act as binders for powders and provide improved color and payoff in lipsticks and similar products.

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Morwet D-809 Powder is a higher molecular weight version of Morwet D-425. The increased molecular weight provides added tolerance to harder water and provides excellent performance at lower use concentrations than the typical naphthalene condensate.

Amaze polymer is a nonionic, naturally-derived film former based on modified corn starch. This starch-based fixative offers excellent root lifting properties, good humidity resistance, and sensorial benefits in hair styling aids.

RESYN 28-2930 is a film-forming hair fixative that offers cost-effective stiffness with flexibility in high alcohol hair spray formulas. It provides strong holding power, manageability, gloss, and adhesion to the hair without flaking.

CELQUAT SC-230M is a naturally derived cationic conditioning polymer designed to provide medium to high conditioning to hair care formulations. It shows excellent coacervation profile and deposition performance. With Celquat SC 230-M, formulators can achieve effective thickening performance and significantly better clarity than using cationic guars and starch-based conditioning polymers.

CELQUAT H-100 is a high viscosity cationic conditioner/film former useful in a broad range of styling, cleansing, and skin care products. This water soluble modified cellulosic is highly cationic over the entire useful pH range, is substantive to hair and skin, and provides such esthetic benefits as excellent combability, hold, gloss, and anti-static properties, and a smooth feel. It can also contribute to thickening effects and is suitable for styling gels, creams, and other products where higher viscosity with hold and conditioning are desired.

Arquad PC 16-50 is a mono-alkyl quaternary based on vegetable C-16 fatty acid that provides a good Balance of conditioning hair with ease of use and formulation.

Armosoft L is a quaternary ammonium compound in iso paraffin solvent.

Ethomid HP-60 is an ethoxylated amide used in a variety of applications.

ELFACOS ST 9 are unique polyalkalene glycols which have excellent stabilizing effect on emulsions. Having a high capacity to absorb water and oil, a relatively low percentage is needed in cosmetic formulations. The stabilizing effect is not obtained by thickening, allowing for low viscous stable emulsions to be achieved. As nonionic copolymers, Elfacos ST 9 and Elfacos ST 37 polyalkylene glycol derivatives are hydrolytic, pH and electrolyte stable over a very wide temperature range. In decorative cosmetics, they act as binders for powders and provide improved color and payoff in lipsticks and similar products.

Adsee AB 615 is an alkoxylated fatty amine and designed to be used for crop protection formulations in order to enhance penetration and retention of spray droplets.

Phospholan PS-131 is ethoxylated phosphate ester mainly used as dispersing and wetting agent as well as emulsifier in several applications.

Adsee 611 is Nouryon’s next generation adjuvant for crop protection applications, designed for tank-mix applications.

Redicote C-404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Rediset LQ-900 is a compaction aid for hot and warm mixes which allows a reduction in mixing and paving temperatures while providing active and passive adhesion.

Morwet EFW Powder is a sodium alkyl naphthalene sulfonate blend witha an anionic blend for excellent wetting of most powders. The best choice for actives with crystallization problems.

Adsee 973 is an alkoxylated alcohol intended for use as an adjuvant in pesticide formulations.

Arquad PC 16-29 is a mono-alkyl quaternary based on vegetable C-16 fatty acid that provides a good balance of conditioning hair with ease of use and formulation.

Adsee ST4 is a maltodextrin/vinylpyrrolidone copolymer containing < 50% renewable content and recommended as a binder in seed treatment/coating as well as granule formulations.

Agrilan 789 Dry is a premium modified polyacrylate that can be used as a dispersant. It is solid and white in color which makes it easier to handle in solid formulations that are desired for hydrophobic ais.

Redicote E-6945 is a co-emulsifier and stabilizer for slow-setting anionic bitumen emulsions used in sealcoats, slurry seal and non paving applications.

Morwet IP Powder is a sodium isopropyl naphthalene sulfonate.

Alcosperse LV-71 is a 80% VOC hair sprays containing approximately 15% water, AMPHOMER LV-71 polymer can provide fine atomization as well as the superior features and benefits expected from AMPHOMER polymer, including excellent stiffness and high humidity curl retention properties. AMPHOMER LV-71 polymer’s composition is also covered under US Patent 9,119,972 B2, and can act as a hair shield for hot heating implements such as flat irons and curling wands, helping to protect the hair cuticle from hair damage caused by heat.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Morwet 3028 Powder is a sodium alkyl naphthalene sulfonate blend.

Ethylan 1008 is a nonionic surfactant based on a synthetic primary alcohol.