Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- Technologies
Features & Benefits
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
Bermocoll® CCA 612 is used in gypsum and cement based plasters to improve the workability, consistency and water retention. Bermocoll® CCA 612 provides high sag resistance.
Properties
- Appearance
- Whitish powder
- Typical Properties
- Characteristics
- Specifications
- Note
- Bermocoll® CCA 612 is a modified high viscosity grade of ethyl hydroxyethyl cellulose.
Value | Units | Test Method / Conditions | |
pH Value (1% Solution) | 7 | — | — |
Value | Units | Test Method / Conditions | |
Surface Activity | Weak | — | — |
Viscosity (at 20 °C, Brookfield LV, in 1% solution) | 5500-7500 | mPa.s | — |
Value | Units | Test Method / Conditions | |
Particle Size (≤ 300 μm) | 98 | % | — |
Water Content | max. 4 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging and Transport
Care should be taken to prevent ignition from heat, spark, open flames or hot surface. BERMOCOLL CCA 612 is packed in a polyethylene bag. Net weight 20 kg. We recommend emptying the bags from the bottom. The empty bags can be recycled or burned.
Storage & Handling
- Storage Conditions
- Bermocoll® CCA 612 should be admixed to the plaster in dry form before the water is added. Due to its small particle size Bermocoll® CCA 612 will dissolve rapidly after addition of water to the dry mix.
- At the temperatures above 250 °C (480 °F), charring of Bermocoll® CCA 612 will occur. At high temperatures and in contact with an open flame, Bermocoll® CCA 612 will burn slowly with the characteristics of cellulose.
- In unopened bags, BERMOCOLL CCA 612 can be stored for several years. In opened bags, the moisture content of BERMOCOLL CCA 612 will be influenced by the air humidity.
- Like many industrial processed powdery materials, cellulose ether dusts are combustible and can cause dust explosions. Dust formation must be avoided or kept to a minimum.