Emulsifier for Slow Setting Cationic Bitumen Emulsions and Control Additive for Slurry Seal. Please consult our new Online Expert Alfred for immediate support and advice to solve your formulation challenges 24/7: https://www.nouryon.com/markets/asphalt/askalfred

Chemical Family: Cationics, Fatty Amines, Quaternary Ammonium Compounds

Functions: Emulsifier, Surfactant, Surfactant (Cationic)

End Uses: Asphalt, Cationic Quick Set Emulsions, Cationic Slow Set Emulsions, Cold Mix

Applicable Processes: Micro Surfacing, Non-Paving Applications, Slurry Surfacing

Features: Easy Handling

Physical Form: Liquid

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Industrial Additives Functions

Features & Benefits

Industrial Additives Features
Features
  • Easy handling: The product has low viscosity, high flash point and contains only water as solvent
  • No need for acid: No acid is required for soap preparation
  • No APEs: The product does not contain alkylphenolethoxylates
  • Water based non-flammable quaternary ammonium emulsifier that can be used as a break retarder.
  • Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
  • Non-flammable version of Redicote E-11 E for safer handling
  • Cationic super stable proven emulsifier that has wider applicability.
  • Super stable emulsifier providing extended workability FDR, plant produced cold mixes and base stabilization
  • Faster setting for Cold in-place recycling (CIR) with or without cement. Can be used for many applications.
  • Water based non-flammable quaternary ammonium emulsifier that can be used as a break retarder.
  • Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
  • Non-flammable version of Redicote E-11 for safer handling.
  • Cationic super stable proven emulsifier that has wider applicability
Product Overview
Product Region Comments Conventional slurry Quick-traffic slurry Microsurfacing
Redicote 611 E, S Produce cationic slow setting emulsions with
excellent latex compatibility. Cement or lime filler not
always required. Emulsions can be formulated with
neutral or near neutral pH. The products can also be
used as dope in these systems.
Yes Sometimes Yes

Additives:

Generally the emulsifier can also be used as a break retarder on the slurry paver. Water soluble Redicote E-11HF-1, Redicote E-11HF, Redicote 611, Redicote E-7000 and Redicote C-450 are particularly suitable because they are water soluble and do not contain flammable solvents.

Applications & Uses

Use Level
1-2%
Application pH Range
4-6

Properties

Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density (at 10°C)1.07g/cc
Flash Pointmin. 100 °C
Characteristics
ValueUnitsTest Method / Conditions
Pour Point-15 (5)°C(°F)
Viscosity (at 20°C)220mPa.s
Specifications
ValueUnitsTest Method / Conditions
Activity39 - 45%WP 2.001
Note
Emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Packaging & Availability

Country Availability
Packaging Type
Regional Availability
  • Africa
  • Asia Pacific
  • Europe
Packaging Information

Redicote 611 is available in bulk shipment, or in one-way totes (IBCs) of 1000kg (2204lbs) net weight.

Storage & Handling

Storage Conditions
  • Redicote 611 contains water and chloride ion and 316 and 317L stainless steels or glass or polymer lined tanks are recommended. Bulk storage need not be heated.
  • Redicote 611 contains quaternary amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.