Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Industrial Additives Features
- Features
- Easy to use: Low viscosity, water-soluble product can be incorporated into the soap solution or preferably blended into the finished emulsion or sealcoat.
- Adhesion promoter especially designed to be easily blended with emulsions.
- Enhance emulsification of difficult binders and improve compatibility of SBS with bitumen.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Dosage
Anionic emulsion or sealcoat 0.1-0.5% Basis Emulsion
Properties
- Physical Form
- Physical Properties
- Characteristics
- Specifications
- Note
- Product contains water and should not be added to hot asphalt cement
Value | Units | Test Method / Conditions | |
Density (at 10°C (50°F)) | 0.95 (7.96) | g/cc (lbs/U.S. gal) | — |
Density (at 20°C (68°F)) | 0.95 (7.92) | g/cc (lbs/U.S. gal) | — |
Density (at 30°C (86°F)) | 0.94 (7.81) | g/cc (lbs/U.S. gal) | — |
Density (at 40°C (104°F)) | 0.93 (7.77) | g/cc (lbs/U.S. gal) | — |
Viscosity (at 10°C (50°F)) | 200 | mPa s (cP) | — |
Viscosity (at 20°C (68°F)) | 100 | mPa s (cP) | — |
Viscosity (at 30°C (86°F)) | 56 | mPa s (cP) | — |
Viscosity (at 40°C (104°F)) | 30 | mPa s (cP) | — |
Flash Point | min. 100 | °C | — |
Value | Units | Test Method / Conditions | |
Pour Point | 10 (50) | °C(°F) | — |
Value | Units | Test Method / Conditions | |
Amine Value | 490 - 530 | mg KOH/g | SMA CL002 |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
- Redicote C-150AP is available in bulk shipments, in tight head steel drums of 400 lbs (181 kg) net weight, or in one-way totes IBCs) of 2000 lbs (907 kg) net weight.
Storage & Handling
- Storage Conditions
- Redicote C-150AP may be stored in carbon steel tanks. Bulk stores should be maintained between 15-35°C (59-95°F).
- Redicote C-150AP contains amines and may cause severe irritation to skin and eyes. Protective goggles and gloves must be worn when handling this product. Product contains water and should not be added to hot asphalt cement.