Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Features
- Low use level: Good quality slow set emulsions are formed at low use level
- Safe and easy handling: Redicote E-11 HF-1 does not contain flammable solvents and so it is much safer to use. The low viscosity, low pour point and water solubility of Redicote E-11 HF-1 makes it easy and safe to use both as emulsifier and as a break control additive (retarder) for slurry
- Good adhesion: Emulsions made with Redicote E-11 HF-1 pass the particle charge test and provide good adhesion to siliceous aggregates
- No need for acid: No acid is required for soap preparation. The neutral pH of the emulsion is preferred in applications like tack coats for concrete, when emulsifying biobased binders and when water soluble thickeners are incorporated.
- Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
- Non-flammable version of Redicote E-11 E for safer handling
- Cationic super stable proven emulsifier that has wider applicability.
- Super stable emulsifier providing extended workability FDR, plant produced cold mixes and base stabilization
- Faster setting for Cold in-place recycling (CIR) with or without cement. Can be used for many applications.
- Water based non-flammable quaternary ammonium emulsifier that can be used as a break retarder.
- Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
- Non-flammable version of Redicote E-11 for safer handling.
- Cationic super stable proven emulsifier that has wider applicability
- Product Overview
Product Region Comments Conventional slurry Quick-traffic slurry Microsurfacing Redicote E-11 HF-1 A Produce cationic slow setting emulsions with
excellent latex compatibility. Cement or lime filler not
always required. Emulsions can be formulated with
neutral or near neutral pH. The products can also be
used as dope in these systems.Yes Sometimes Yes Additives:
Generally the emulsifier can also be used as a break retarder on the slurry paver. Water soluble Redicote E-11HF-1, Redicote E-11HF, Redicote 611, Redicote E-7000 and Redicote C-450 are particularly suitable because they are water soluble and do not contain flammable solvents.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Use Level
- 0.8-1.5%
- Application pH Range
- 2-7
Properties
- Physical Form
- Physical Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Density (at 10°C (50°F)) | 1.06 (8.78) | g/cc (lbs/U.S. gal) | — |
| Density (at 20°C (68°F)) | 1.05 (8.71) | g/cc (lbs/U.S. gal) | — |
| Density (at 30°C (86°F)) | 1.04 (8.63) | g/cc (lbs/U.S. gal) | — |
| Pour Point | -10 | °C | — |
| Density (at 40°C (104°F)) | 1.03 (8.58) | g/cc (lbs/U.S. gal) | — |
| Viscosity (at 10°C (50°F)) | 1160 | mPa s (cP) | — |
| Viscosity (at 20°C (68°F)) | 620 | mPa s (cP) | — |
| Viscosity (at 30°C (86°F)) | 360 | mPa s (cP) | — |
| Viscosity (at 40°C (104°F)) | 190 | mPa s (cP) | — |
| Flash Point | min. 90 | °C | — |
| Value | Units | Test Method / Conditions | |
| Activity | 48 - 52 | % | PM 5.020 |
| pH (10% in water) | 6 - 9 | — | EP 5003N |
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Conditions
- Redicote E-11 HF-1 may be stored in carbon steel tanks. Redicote E-11 HF-1 is compatible with polyethylene and polypropylene. Bulk storage does not need to be heated. Redicote E-11 HF-1 contains quaternary amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product..