Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Features
- Easy dispersion: The product is fully liquid, disperses very easily in water and is particularly suitable for in-line plants. Soap concentrates containing up to 20% active material can be prepared.
- Emulsion stability: The product provides emulsions with excellent storage and pumping stability
- Low emulsion viscosity: Emulsions produced with Redicote EM-44A have relatively low viscosity, which can be an advantage when dealing with problematic viscosity-building bitumens
- Phosphoric acid systems: Redicote EM-44A can be used with phosphoric acid to produce emulsions suitable for micro surfacing or cold mix.
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions.
- Highest viscosity building in CRS-2 emulsions saving binder costs. Good emulsion quality at lower dosage, suitable for polymer modified emulsions and provides good adhesion.
- Medium viscosity building in CRS-2 emulsions.
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions
- Liquid emulsifier that builds medium viscosity in rapid set emulsions and provides good adhesion
- Liquid CRS emulsifier for faster break, provides good adhesion and provides good value for the money
- Liquid emulsifier that builds high viscosity in CRS-2 emulsions and also provides faster breaking
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions, gives good quality emulsions and efficient in terms of dosage.
- 100% active high viscosity building emulsifier that gives high quality emulsions at low dosage.
- 100% active high viscosity building emulsifier that is soluble in acidified water at ambient temperatures
- Product Overview
Product Region Comments Conventional slurry Quick-traffic slurry Microsurfacing Redicote EM-44A A Products for phosphoric acid systems. Provides reliable cohesion development with wide range of bitumen including low acid bitumen. It is a premium system for nigh work, early or late season cooler weather paving. Yes Yes Yes
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Product Applications
Products for cationic rapid set emulsions for surface dressing / chipseal primer seal, scrub seal and sand seal, and cationic medium set emulsions for graded aggregate seal
- Dosage
Cationic rapid set emulsion 0.18-0.25% pH 1.5-3.0 hydrochloric acid
Cationic medium set emulsion 0.25-0.50% pH 1.5-3.0 hydrochloric acid
Micro surfacing 0.9-2.0% pH 2-3 phosphoric acid
Properties
- Physical Form
- Physical Properties
- Specifications
Value | Units | Test Method / Conditions | |
Density (at 20°C (68°F)) | 0.87 (7.24) | g/cc (lbs/U.S. gal) | — |
Pour Point | 10 | °C | — |
Density (at 30°C (86°F)) | 0.86 (7.18) | g/cc (lbs/U.S. gal) | — |
Density (at 40°C (104°F)) | 0.85 (7.14) | g/cc (lbs/U.S. gal) | — |
Density (at 50°C (122°F)) | 0.85 (7.11) | g/cc (lbs/U.S. gal) | — |
Viscosity (at 20°C (68°F)) | 1000 | mPa s (cP) | — |
Viscosity (at 30°C (86°F)) | 600 | mPa s (cP) | — |
Viscosity (at 40°C (104°F)) | 350 | mPa s (cP) | — |
Viscosity (at 50°C (122°F)) | 250 | mPa s (cP) | — |
Flash Point | min. 100 | °C | — |
Value | Units | Test Method / Conditions | |
Water Content | max. 1 | % | VE 5.022 |
Amine Value | 200-230 | mg HCl/g | VE.2.018 |
Packaging & Availability
- Regional Availability
- Packaging Information
- Redicote EM-44A is available in bulk shipment, in tight head steel drums of 360 lbs (163 kg) net weight, or in one-way totes (IBCs) of 2100 lbs (953 kg) net weight.
Storage & Handling
- Storage Conditions
- Redicote EM-44A may be stored in carbon steel tanks. Bulk storage should be maintained at 15-30°C (59-86°F).
- Redicote EM-44A contains amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.