Products

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.

Redicote E-85 is a emulsifier for rapid and medium setting cationic bitumen emulsions.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

GABROSA M 300 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars.

Bermocoll M 70 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll M 70 contains methyl, ethyl and hydroxyethyl substitution giving a unique Balance between workability and strength.

Bermocoll ML 11 is a modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll ML 11 contains methyl, ethyl and hydroxyethyl substituents giving a unique Balance between workability and strength.

GABROSA M 100 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars.

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Wetfix BXE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter and coating aid for foamed bitumen cold mix.

Bermocoll CCM 812 is a high modified non-ionic, water soluble cellulose ether. It improves the consistency and the water retention of gypsum based plaster. Bermocoll CCM 812 is a high modified high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Bermocoll M 10 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll M 10 contains methyl, ethyl and hydroxyethyl substitution giving a unique Balance between workability and strength.

Redicote C-404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Rediset LQ-900 is a compaction aid for hot and warm mixes which allows a reduction in mixing and paving temperatures while providing active and passive adhesion.

Redicote E-6945 is a co-emulsifier and stabilizer for slow-setting anionic bitumen emulsions used in sealcoats, slurry seal and non paving applications.

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Bermocoll CCA 328 is a highly modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to gypsum based mortars. Bermocoll CCA 328 is a modified high viscosity grade of ethyl hydroxyethyl cellulose.

Redicote E-4875 NPF is a emulsifier for cationic slow setting emulsions suitable for tack, prime, slurry seal, cold mix and sealcoats.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote I-249 is a additive for clay stabilized emulsions and sealcoats derived from coal tar pitch or bitumen to improve resistance to moisture.

Alcogum SL 827 is a water-soluble thickener for anionic bitumen or oil emulsions that is stable at high emulsion temperatures. It is easily added in the soap phase of anionic emulsions either before or after addition of alkali (see below for more information). Alcogum SL 827 may reduce settling during storage and reduce emulsifier dosage.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Finnfix CMC brand is used in a range of industrial applications, such as paper surface treatment, mining, fabric care, textile and ceramics. Finnfix products hydrate and dissolve in hot and cold water. By selecting the right Finnfix grade, manufacturers can achieve the desired rheology. Finnfix CMC is known for its excellent water retention, film forming capability and surface activity. These bio-based and biodegradable products are food contact approved and do not contain SVHC (Substances of Very High Concern).

Bermocoll E 230 X is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products. Bermocoll E 230 X is low viscosity grade of ethyl hydroxyethyl cellulose.

Redicote C-450-1 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Versa-TL 77 is a water solution of a neutralized, sulfonated polystyrene.

Bermocoll CCM 879A is a highly modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to gypsum based mortars.

Bermocoll ML 31 is a modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll ML 31 contains methyl, ethyl and hydroxyethyl substituents giving a unique Balance between workability and strength.

Redicote E-620 is a nonionic co-emulsifier and wetting agent for prime emulsion, dust control and rejuvenating oil emulsions.

Redicote E-47 NPF is a nonionic emulsifier for the production of slow-setting emulsions from bitumen, tall oil pitch, dust oils and resins.