Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
High conductivity
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Cure Method
Properties
- Physical Form
- Appearance
- Aqueous
- Physical Properties
- Typical Properties
- Performance Properties
Properties PulseForge 1200 Thermal(3) Sheet resistance(1) JS-A101A JS-A101A Units 25 < 100 milli-ohm/square Volume resistivity (2) 7.80E-06 < 3.1E-05 ohm-cm Pencil hardness >4H >4H - Printed on Melinex ST505 with Dimatix DMP-2831 at 20 micron drop spacing.
- The inks also display excellent crosshatch adhesion and water resistance after full curing.
- (1) Typical values.
- (2) Value calculated based on estimate of 50% porosity in cured print.
- (3) Thermal cure: 140C 10 minutes
Value | Units | Test Method / Conditions | |
Silver Content | 40.0 | wt% | — |
Flash Point | Non- Flammable | — | — |
Specific Gravity | 1.6 | — | — |
Surface Tension | 19 - 30 | dyne/cm | — |
Viscosity | 5 - 7 | cP | — |
z-avg particle size (Malvern dynamic light scattering) | 30 - 50 | nm | — |
Value | Units | Test Method / Conditions | |
Sheet Resistance (Pulseforge 1200) | 25.0 | milli-ohm/square | — |
Volume Resistivity (Pulseforge 1200) | 7.8e-06 | ohm-cm | — |
Pencil Hardness (Pulseforge 1200) | min. 4 | Hour | — |
Sheet Resistance (Thermal) | max. 100 | milli-ohm/square | — |
Volume Resistivity (Thermal) | max. 3.1E-05 | ohm-cm | — |
Pencil Hardness (Thermal) | min. 4 | Hour | — |
Particle | Silver nanoparticles | — | — |
Loading | 40.0 | wt% | — |
Curing Temperature | 100 - 250 | °C | — |
Resistivity | 7.8E-6 - 3.1E-5 | Ohm-cm | — |
Packaging & Availability
- Packaging
Standard sample order is 50 mL or multiples of 50 mL. Bulk packaging is also available.