Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
High conductivity
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Cure Method
Properties
- Physical Form
- Appearance
- Aqueous
- Physical Properties
- Typical Properties
- Performance Properties
Properties PulseForge 1200 Thermal(2) Sheet resistance 25 < 100 milli-ohm/square Volume resistivity (1) 7.80E-06 < 3.1E-05 ohm-cm Cross Hatch Hardness 5B 5B - Pencil hardness >4H >4H - - Printed on Melinex ST505 with Dimatix DMP-2831 at 20 micron drop spacing.
- (1) Value calculated based on estimate of 50% porosity in cured print.
- (2) Thermal cure: 140°C for10 minutes
| Value | Units | Test Method / Conditions | |
| Silver Content | 40.0 | wt% | — |
| Flash Point | Non- Flammable | — | — |
| Specific gravity | 1.6 | — | — |
| Surface Tension | 28 - 32 | dyne/cm | — |
| Viscosity | 8 - 12 | cP | — |
| z-avg particle size (Malvern dynamic light scattering) | 30 - 50 | nm | — |
| Value | Units | Test Method / Conditions | |
| Sheet Resistance (Pulseforge 1200) | 25.0 | milli-ohm/square | — |
| Volume Resistivity (Pulseforge 1200) | 7.8e-06 | ohm-cm | — |
| Pencil Hardness (Pulseforge 1200) | min. 4 | Hour | — |
| Crosshatch Adhesion (Pulseforge 1200) | 5B | — | — |
| Sheet Resistance (Thermal) | max. 100 | milli-ohm/square | — |
| Volume Resistivity (Thermal) | max. 3.1E-05 | ohm-cm | — |
| Pencil Hardness (Thermal) | min. 4 | Hour | — |
| Crosshatch Adhesion (Thermal) | 5B | — | — |
| Particle | Silver nanoparticles | — | — |
| Loading | 40.0 | wt% | — |
| Curing Temperature | 100 - 250 | °C | — |
| Resistivity | 7.8E-6 - 3.1E-5 | Ohm-cm | — |
Packaging & Availability
- Packaging
Standard sample order is 50 mL or multiples of 50 mL. Bulk packaging is also available.