Products

NuSil™ CV-1142 is a non-corrosive controlled volatility RTV silicone adhesive/sealant.

NuSil™ MED-6670 is a low coefficient of friction silicone coating.

NuSil™ NuSil™ MED-1137 is a RTV silicone adhesive.

NuSil™ MED1-4013 is a fast-cure silicone adhesive.

NuSil™ CV-2946 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.5 W/m-K, Primed Lap Shear 160 psi (1.1 MPa).

NuSil™ CV-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

NuSil™ R-2145 is a extremely tough, high durometer, fast-cure adhesive/sealant.

NuSil™ MED-4750 is a high consistency silicone elastomer.

NuSil™ MED-4162 is a silicone dispersion.

NuSil™ CV-1152 is a controlled volatility RTV silicone conformal coating.

NuSil™ MED-4870 is a liquid silicone rubber.

CareSil™ CES-1104 is a high purity elastomer gel delivered in an hydrophilic aqueous gel that can be incorporated directly into the water phase or post-added to emulsions. SFS (Surfactant Free Silicone) emulsion technology by Silicone Membrane stabilization makes this possible. Upon application the encapsulated CES materials break and offer an initial refreshing feel that is followed by a velvety silicone after feel. This product is recommended for use in skin care, sun care, and color cosmetics.

NuSil™ MED-4850 is a liquid silicone rubber.

NuSil™ CF1-3510 is a engineering flourosilicone elastomer. Designed for protection of electrical components and assemblies against shock, vibration, moisture, dust, chEMIcals, and other environmental hazards.

NuSil™ CV10-2568 is controlled volatility RTV ablative silicone. For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices.

NuSil™ NuSil™ MED-1511 is a RTV silicone adhesive.

NuSil™ MED-361 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: DIMETHYL POLYMER.

NuSil™ NuSil™ MED-1037 is a RTV silicone adhesive.

NuSil™ MED-6755 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: 1.46 R.I., OPTICALLY CLEAR.

NuSil™ R-3930 is a RTV fluorosilicone dispersion.

NuSil™ MED3-4213 is a fast-cure silicone adhesive.

NuSil™ MED-4044 is a low viscosity silicone elastomer.

NuSil™ MED-6607 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, IN NAPHTHA.

NuSil™ CV1-1142-4 is a non-corrosive, controlled volatility, uv tracer, RTV silicone adhesive/sealant.

NuSil™ MED-4080 is a high consistency silicone elastomer.

NuSil™ R-2188 is a silicone potting and encapsulating elastomer.

NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.

NuSil™ CF2-3521 is a fluorosilicone elastomer.

NuSil™ R1-2145 is a extremely tough, high durometer, fast-cure adhesive/sealant.

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

NuSil™ R-2949 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 0.75 W/m-k Thermal Conductivity.

NuSil™ CV-2942 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W/m-K, Primed Lap Shear 375 psi (2.6 MPa).

NuSil™ MED2-4213 is a fast-cure silicone adhesive.

NuSil™ FS-3730-2 is a fluorosilicone adhesive/sealant.

NuSil™ SFM5-2350 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone FoamComment: Flame Resistant, 25 lb/ft³ (0.400 g/cm³).

NuSil™ CV1-2640 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 25 ohm-cm, Pumpable.