NuSil™ MED10-6607

1 of 565 products in this brand
NuSil™ MED10-6607 is a RTV silicone dispersion.

Product Type: Adhesive, Coating

Application Area: Medical Applications

Cure Method: Moisture Cure

Application Method: Dip Coating, Spray

Chemical Family: Silicones

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Product Type

Features & Benefits

Ready-to-Use Product Features
Product Highlights
  • High Strength, one-part, flowable RTV silicone dispersion
  • Cures at room temperature upon exposure to atmospheric moisture

Applications & Uses

Application Area
Application Method
Cure Method
Plastics & Elastomers End Uses
Applications
  • Suitable for dip casting and heat-curing of thin elastomeric films
  • For use as an adhesive for bonding and sealing silicone together
  • Low viscosity makes dispersions ideal for use as sprayable coatings
Instructions for Use

Mixing

Thoroughly stir material to ensure homogeneity. Exercise care to prevent solvent loss during deairing. Accomplish additional dilution for thin film applications by adding appropriate solvent. Mixer design/size/type, blade/propeller type, shear/RPM levels, and heat generated during mixing, are important parameters and should be addressed in order to have an adequately mixed dispersion. Warning: Consult the MSDS for MED10-6607 prior to use, as its solvent carrier is hazardous.

Coating and Use

Dispersions are more commonly used in dip molding processes, but can also be sprayed or cast. Make sure to apply under a fume hood or in a well ventilated environment. Care should be taken before placing coated mandrels or parts in oven due to the presence of solvent.

Properties

Physical Form
Appearance
Translucent
Typical Properties
ValueUnitsTest Method / Conditions
Viscosity6,000 (6,000 )cP (Mpa*s)
Non Volat ile Content35.0%
Durometer Type A40.0
Elongat ion650.0%
Mix Rat io1 PART
SolventNaptha
Specific Gravity1.1
Tear95 (16.75 )ppi (kN/m)
Tensile1,200 (8.28 )psi (MPa)
Cured Properties
ValueUnitsTest Method / Conditions
Cure SystemOxime
Cure at RTV7.0days

Packaging & Availability

Regional Availability
  • Asia Pacific
  • Europe
  • Latin America
  • North America

Storage & Handling

Storage and Handling

Most dispersions are stored prior to application. It is important to note that NuSil recommends keeping the dispersion in its original container when possible, tightly sealed and stored below 40º C. Care should be taken to prevent solvent evaporation and contamination during long or short term storage.