NuSil Technology
NuSil™ MED-6670
Ready to Use Product Type: Coating
Application Areas: O-rings, Valves, Medical Applications
Features: Abrasion Resistant, Low Viscosity, Low Friction, Low Coefficient of Friction
Application Method: Dip Coating, Spray
Chemical Family: Silicones
NuSil™ MED-6670 is a low coefficient of friction silicone coating.
NuSil Technology
NuSil™ CV-2946
Ready to Use Product Type: Conductive Adhesive
Application Areas: Electronic Components, Circuit Substrates
Chemical Family: Silicones
NuSil™ CV-2946 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.5 W/m-K, Primed Lap Shear 160 psi (1.1 MPa).
NuSil Technology
NuSil™ MED-4162
Chemical Family: Silicones
Ready to Use Product Type: Coating
Application Areas: Medical Applications
Application Method: Spray, Dip Coating
Features: Friction Reduction, Low Viscosity, Excellent Lubricity, High Molecular Weight
NuSil™ MED-4162 is a silicone dispersion.
NuSil Technology
NuSil™ CV-1152
Ready to Use Product Type: Conformal Coating
Features: Low Outgassing, Wide Temperature Operating Range, Excellent Dielectric Properties
Application Areas: Connectors, Electronic Components, Switches
Chemical Family: Silicones
NuSil™ CV-1152 is a controlled volatility RTV silicone conformal coating.
NuSil Technology
NuSil™ CF1-3510
Polymer Name: Fluorosilicone
End Uses: O Rings, Electrical Components
Features: Excellent Solvent Resistance, Shock Absorbent, Chemical Resistant
NuSil™ CF1-3510 is a engineering flourosilicone elastomer. Designed for protection of electrical components and assemblies against shock, vibration, moisture, dust, chEMIcals, and other environmental hazards.
NuSil Technology
NuSil™ CV10-2568
Ready to Use Product Type: Encapsulant, Potting Compound
Application Areas: Solar Panel
Chemical Family: Silicones
NuSil™ CV10-2568 is controlled volatility RTV ablative silicone. For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices.
NuSil Technology
NuSil™ MED-361
Chemical Family: Silicones
Application Areas: Medical Applications
Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics
Features: Hydrophobic, Heat Resistance, Oxidation Resistant, Excellent Water Repellency
NuSil™ MED-361 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: DIMETHYL POLYMER.
NuSil Technology
NuSil™ MED-6755
Ready to Use Product Type: Encapsulant, Potting Compound
Application Areas: Medical Applications
Chemical Family: Silicones
NuSil™ MED-6755 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: 1.46 R.I., OPTICALLY CLEAR.
NuSil Technology
NuSil™ MED-6607
Ready to Use Product Type: Adhesive
Application Areas: Medical Applications
Chemical Family: Silicones
NuSil™ MED-6607 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, IN NAPHTHA.
NuSil Technology
NuSil™ MED-4080
Polymer Name: Silicone Elastomer
Processing Methods: Calendering, Extrusion
End Uses: Drug Delivery Pens, Medical/Healthcare Applications
Features: Non-tacky surface, Improves Physical Properties, Good Tear Strength, High Modulus
NuSil™ MED-4080 is a high consistency silicone elastomer.
NuSil Technology
NuSil™ MED-4815
Polymer Name: Silicone Elastomer
Processing Methods: Injection Molding
End Uses: Medical/Healthcare Applications, Drug Delivery Pens, Valve Parts, Valves, Gaskets
NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.
NuSil Technology
NuSil™ R-2949
Application Areas: Housing
Chemical Family: Silicones
NuSil™ R-2949 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 0.75 W/m-k Thermal Conductivity.
NuSil Technology
NuSil™ MED-9031
Ready to Use Product Type: Grease
Application Areas: O-rings, Gaskets, Medical Applications
Compatible Substrates & Surfaces: Ceramic, Glass
Features: Hydrophobic, High Consistency
Chemical Family: Silicones
NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.
NuSil Technology
NuSil™ CF5-3521-2
Ready to Use Product Type: Coating, Elastomeric Sealant, Adhesive
Features: Electrically Conductive, Excellent Solvent Resistance
Chemical Family: Silicones
NuSil™ CF5-3521-2 is fluorosilicone elastomer. Use as a coating, sealant, adhesive or molding material in applications requiring solvent resistance.
NuSil Technology
NuSil™ CV-2942
Ready to Use Product Type: Conductive Adhesive
Application Areas: Electronic Components, Housing
Chemical Family: Silicones
NuSil™ CV-2942 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W/m-K, Primed Lap Shear 375 psi (2.6 MPa).
NuSil Technology
NuSil™ CV1-2640
Ready to Use Product Type: Conductive Adhesive
Application Areas: Housing
Chemical Family: Silicones
NuSil™ CV1-2640 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 25 ohm-cm, Pumpable.
NuSil Technology
NuSil™ SFM5-2350
Foam Type: Flexible Foam
Chemical Family: Silicones
NuSil™ SFM5-2350 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone FoamComment: Flame Resistant, 25 lb/ft³ (0.400 g/cm³).