Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Consumer Goods
Products
Nylene
All Nylene
Search products
Consumer Goods
Applications
Appliances & Electronics
Other Consumer Goods Applications
Sports & Recreation
Apparel
Furniture
Housewares
Product Families
End Uses
Functions
Chemical Family
Features
All Filters
107 Products found on Nylene in
Consumer Goods
Most Viewed
TDS
With TDS
Nylene® 323 HS
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Heat Stabilizer
Flexural Modulus:
517.0 - 517.0 MPa
Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin
Nylene® 401D
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding, Extrusion
Nylene Specially formulated nylon 6 molding resin possessing outstanding flow characteristics Ideally suited for applications requiring high flow properties and resistance to cracking Optimum processing conditions should provide a melt temperature of 450 - 470°F at nozzle
Nylene® 2408 HSSP BK
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Profile Extrusion
Flexural Modulus:
1080.0 - 1080.0 MPa
Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.
Nylene® 2409 HSSP BK
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Flexural Modulus:
1138.0 - 1138.0 MPa
Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
Nylene® 4214-33 HS
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer, Impact Modifier
Flexural Modulus:
7585.0 - 7585.0 MPa
Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses
Nylene® 2401 HSSP BK
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Flexural Modulus:
1100.0 - 1100.0 MPa
Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
Nylene® 2407 HSSP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion
Flexural Modulus:
800.0 - 800.0 MPa
Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts
Nylene® 607
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Film Extrusion, Extrusion, Profile Extrusion
Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.
Nylene® NX4797
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Film Extrusion, Extrusion
Nylene Designed for use in extrusion of Tubing and Film Excellent grease resistance, toughness, and resistance to abrasion Films made from NX4797, have good barrier properties against Oxygen and Aroma typical of PA6 Meets FDA 21 CFR 177.1500 food contact requirements
Nylene® PX1719
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Profile Extrusion, Injection Molding
Additives Included:
Impact Modifier
Flexural Modulus:
655.0 - 655.0 MPa
Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required
Nylene® PX1719HS
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Heat Stabilizer
Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.
Nylene® 600
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Casting, Extrusion
Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die
Nylene® 2403 HSSP BK
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Flexural Modulus:
1345.0 - 1345.0 MPa
Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
Nylene® 5250 HS
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
10345.0 - 10345.0 MPa
Nylene 50% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Specifically designed for maximum strength and stiffness while maintaining the heat and chemical resistance typical of nylon 6 resins Suitable for brackets, enclosures, valve bodies, and other uses where maximum strength and stiffness are required
Nylene® 2415 HSSP BK
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion
Flexural Modulus:
793.0 - 793.0 MPa
Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.
Nylene® 2408 HSSP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Profile Extrusion
Flexural Modulus:
1080.0 - 1080.0 MPa
Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing
Nylene® 601
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Casting, Extrusion
Additives Included:
Heat Stabilizer
Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die
Nylene® NX1170
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion
Additives Included:
Heat Stabilizer, Lubricant (Unspecified)
Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.
Nylene® 603
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Cable Extrusion
Additives Included:
Plasticizer (Unspecified)
Nylene Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.
Nylene® NX3024F
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion
Nylene Nylene NX3024F is a medium viscosity nylon 6 resin suitable for general purpose molding applications. In addition to excellent melt stability and good melt strength, NX3024F has excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene NX3024F meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die.
Nylene® 615 NP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Film Extrusion, Extrusion
Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.
Nylene® 734
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Impact Modifier
Flexural Modulus:
2070.0 - 2070.0 MPa
Nylene Heat stabilized version of 733, which is a highly impact modified nylon suitable for both molding and extrusion In addition to heat stabilization to prevent thermal degradation, parts molded from 734 have excellent impact strength right out of the mold without post conditioning Outstanding features include high stiffness and high strength Cylinder temperatures should be in the 500-550°F range.
Naxel™ PC35CV
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2310.0 - 2310.0 MPa
Nylene Unreinforced general purpose polycarbonate injection molding grade Has the high impact resistance and heat resistance typical of polycarbonate Available in water white, blue tint, black, and pre-colored Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses
Nylene® 132L
Polymer Name:
Polyamide 66 (PA 66)
Flexural Modulus:
2860.0 - 2860.0 MPa
Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required
ALM Polycarbonate™ PC30
Polymer Name:
Polycarbonate (PC)
Flexural Modulus:
2415.0 - 2415.0 MPa
ALM Polycarbonate™ PC30 by Polymeric Resources Corporation is comprised of Polycarbonate. It is commonly used for a variety of applications. .
Nylene® 311 HS
Polymer Name:
Polyamide 66 (PA 66)
Additives Included:
Heat Stabilizer, Impact Modifier
Flexural Modulus:
1795.0 - 1795.0 MPa
Nylene Toughened, heat-stabilized nylon 6/6 Exhibits an improved impact resistance and flexibility over unmodified nylons Retains the excellent chemical and heat resistance typical of all nylon products Suitable for applications such as clips, fasteners, safety restraint parts, and other parts with snap fit or clip features
Nylene® 409
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer
Flexural Modulus:
2760.0 - 2760.0 MPa
Nylene Heat stabilized version of 406 which is a general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation Parts molded from 409 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle
Nylene® 132 HSL
Polymer Name:
Polyamide 66 (PA 66)
Additives Included:
Heat Stabilizer
Flexural Modulus:
2860.0 - 2860.0 MPa
Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required
Nylene® 406F
Polymer Name:
Polyamide 6 (PA 6)
Flexural Modulus:
2760.0 - 2760.0 MPa
Nylene Resin formulated to comply with FDA regulation 21CFR 177.1500 for food contact applications, and ANSI/NSF Standard 14 General purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded from 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon
Duratel™ MF9
Polymer Name:
Polyacetal Copolymer (POM)
Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.
Nylene® 406
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2760.0 - 2760.0 MPa
Nylene General purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded from 406 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle
Nylene® 134 HSL
Polymer Name:
Polyamide 66 (PA 66)
Additives Included:
Nucleating Agent, Heat Stabilizer
Flexural Modulus:
3255.0 - 3255.0 MPa
Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required
Vexel™ B12U
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2344.0 - 2344.0 MPa
Vexel™ B12U by Polymeric Resources Corporation is comprised of Polybutylene Terephthalate. It is commonly used as Molding Resin for a variety of applications in Automotive.
Naxel™ PC41
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Flexural Modulus:
2240.0 - 2240.0 MPa
Nylene General purpose polycarbonate produced from recycled feed-stocks Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses.
Naxel™ PC43
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer
Flexural Modulus:
2240.0 - 2240.0 MPa
Nylene General purpose, UV stabilized polycarbonate molding resin Has the high impact resistance and heat resistance typical of polycarbonate, while adding a UV stabilizer package for improved weatherability Suitable for enclosures and housings, trim panels, and consumer items that may experience increased light exposure
Duratel™ MF3
Polymer Name:
Polyacetal Copolymer (POM)
Nylene Duratel MF3 is a high-viscosity acetal co-polymer. Duratel MF3 has slightly higher toughness than standard MF9, and parts molded with MF3 should have thicker wall sections and shorter flow lengths to accommodate the higher viscosity. MF3 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.
Show
36
of 107 results
1
2
3