Products

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts

Nylene Designed for use in extrusion of Tubing and Film Excellent grease resistance, toughness, and resistance to abrasion Films made from NX4797, have good barrier properties against Oxygen and Aroma typical of PA6 Meets FDA 21 CFR 177.1500 food contact requirements

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.

Nylene Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Nylene 43% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6. Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption

Nylene 14% glass fiber reinforced, impact modified, heat stabilized nylon 6/6 Improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene 33% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylene 13% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nylene Heat stabilized version of NYLENE 451 recommended for molding - Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6/6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene High viscosity (200 RV), extrusion grade nylon 6/6 recommended for practically all types of extrusion including profile, film Has good melt flow and melt strength properties Optimum processing conditions should permit for a melt temperature of 550°F -575°F at the die

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 15% glass fiber reinforced, impact modified, heat stabilized nylon 6 Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene 43% glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin also provides excellent surface appearance Suitable for brackets, supports, enclosures, handles, and any other uses which require high stiffness along with good appearance

Nylene 33% glass fiber reinforced heat stabilized nylon 6 injection molding resin. High heat and chemical resistance inherent in nylon type resins, along with higher strength and stiffness due to glass fiber reinforcement. Excellent surface appearance when processed in a warm mold. Suitable for brackets, levers, handles, enclosures, and other applications where high physical properties combined with good appearance are required. The ASTM line call out for this product is D4066 PA022G33

Nylene General purpose unreinforced nylon 6/10 injection molding grade Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for clips, bushings, housings, and other uses where moisture pickup may be a concern

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die