Nylene® NX3024

1 of 171 products in this brand

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Coating, Coextrusion, Compounding, Extrusion

Flexural Modulus: 15000.0 - 15000.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Polyamides
Polymer Name: Polyamide 6 (PA 6)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Labeling Claims: Food Contact Acceptable
Materials Features: Abrasion Resistant,
Food Contact Acceptable,
Good Melt Strength,
Good Toughness,
Grease Resistant,
High Melt Stability,
Low Odor,
Medium Viscosity

Applications & Uses

Markets: Food & Nutrition,
Healthcare & Pharma,
Industrial,
Personal Care,
Printing & Packaging
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Healthcare & Pharma — Medical
Disposable Nonwovens
Printing & Packaging — Packaging
Food & Beverage Packaging
Personal Care — Personal Hygiene
Baby Diapers
Food & Nutrition — Processing & Packaging
Other Processing & Packaging Applications
Plastics & Elastomers End Uses: Film,
Food Preparation Equipment,
Non Specific Food Applications,
Nonwovens
Plastics & Elastomers Processing Methods: Coating,
Coextrusion,
Compounding,
Extrusion

Properties

Physical Form: Pellets,
Solid
Mechanical Properties
Physical Properties
Thermal Properties
Additional Information

	Value	Units	Test Method / Conditions
Tensile Strength	12000	psi	ASTM D638
Flexural Modulus	15000	MPa	ISO 178
Izod Notched Impact Strength	0.7	ft-lb/in	ASTM D256
Elongation	70	%	ASTM D638

	Value	Units	Test Method / Conditions
Molding Shrinkage	0.014	-	ISO 294-4
Specific Gravity	1.14	-	ASTM D 792
Water Absorption	1.8	%	ASTM D570

	Value	Units	Test Method / Conditions
Deflection Temperature Under Load - DTUL (66 psi (0.45 Mpa))	182	°C	ASTM D648
Deflection Temperature Under Load - DTUL (264 psi (1.8 MPa))	68	°C	ASTM D648
Melting Point	220	°C	ASTM D3418

	Value	Units	Test Method / Conditions
FDA/NSF Approval	Regulation 21 CFR 177.1500	-	—

Packaging & Availability

Country Availability: Canada,
USA
Regional Availability

Nylene® NX3024

Similar Products

Aegis® H135ZP

Aegis® H95ZI

Aegis® MBM

Aegis® H100ZP

Aegis® H60ZI

Aegis® PIR-H85NP

Knowde Enhanced TDS