Products

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

CEPPA is one kind of environment‐friendly fire retardant, it can be used permanent flame retarding modification of polyester, and the spinnability of flame retarding polyester is similar to PET, thus it can be used in all kinds of spinning system, with features as excellent thermal stability, no decompound during spinning and no smell. It can be used in all the application fields of PET to improve antistatic capacity of polyester. The dosage for copolymerization of PTA and EG is 2.5~4.5%, the phosphorus assay of flame retarding polyester sheet is 0.35‐0.60%, and the LOI of flame retarding products is 30~36%.

TBBP-DBPE is mainly used in PP, PE, PS and ABS.

LS 622 is a hindered amine light stabilizer. It is used in light aging inhibition of polyethylene, polypropylene, polyurethane, metaformaldehyde, polyamine and polyester, also in ABS and engineering plastics.

BDP is a halogen‐free bisphosphate flame retardant used in engineered resins, and its superiority is demonstrated in low volatility, excellent hydrolytic stability, and high thermal stability that can tolerate high processing temperature required for engineered resins. It is recommended for use in PC/ABS, mPPO, epoxy resins .

AO 2246 is a high‐efficiency nonpolluting Antioxidant , applicable to the manufacture of synthetic rubber, latex and natural rubber, being one of excellent phenol Antioxidants. It is applicable to light colored or colored rubber product. In plastic industry, this product can prevent the thermal aging and light aging of polyester chlornamee,polystyrene,ABS resin, polyoxymethylene and cellulose resin with the dosage of 0.5‐1%.

AO 702 is an important phenolic antioxidant, which is mainly used for plastics, natural and synthetic rubber, and usually used as oils additives. With the excellent performance on high‐temperature antioxidation, it finds many applications in oil products serving under high temperature like heat conduction oil, quench oil and special lubricant.

TBE is a reactive flame‐retardant, mainly used in foamed polystyrene, unsaturated polyester, foamed polyester and the like to resist burning, also used together with Hexabromocyclododecane, having a synergistic effect.

APP‐201 is a fine‐particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

FR-680 is an outstanding flame retardant for HIPS, ABS, polycarbonate, thermoplastic, elastomers, unsaturated polyesters, adhesives, coatings, and textiles. And it is especially efficient for applications in which thermal stability at high processing temperatures is important.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.

FR‐690 is a chlorinated phosphate flame retardant used in rigid and flexible polyurethane foams, whose superiority is demonstrated in good stability. It can readily be used to meet the fire safety standards such as California TB 117, FMVSS 302, UL94 HF 1, British BS 5852, DIN 75200 and CSE RF4 Class 1.

APP‐205 is a non‐halogenated flame retardant based on APP‐201 which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. APP‐205 differs in its mode of action from chlorineor bromine‐containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat‐insulating effect, reduces fur‐ther oxygen access and prevents dripping of the thermoplastic. APP‐205 may be used in poly‐propylene, PP‐copolymers and PP‐blends.

TCP is an additive flame retardant plasticizer used in flexible polyurethane foams, whose superiority is demonstrated in excellent hydrolysis stability, good electric insulation performance, superior mildew resistance and abrasion resistance. It can be recommended as flame retardant for synthetic rubber, PVC, polyester, polyolefin, and plasticizer or flame retardant plasticizer for vinyl resin, nitrocellulose, butyl rubber and chloroprene rubber.

DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene,polyvinyl chloride, ABS rubber and lubricating oil. It has high‐melting and low‐volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect.

TBPA is used in polyester, unsaturated polyester, epoxy resin, as a reactive flame‐retardant; used in polystyrene, polypropylene, polyethylene and ABS resin, as a additive flame retardant; used in various engineering plastics to resist burning based on its excellent thermal stability.

TBBA is mainly used for epoxy resin, polycarbonate polyester, phenol resin, polyurethane etc. also use for polystyrene, ABS,unsaturated polyester a flame ‐retardant‐additive.

FR‐HF‐4 is an additive flame retardant used in flexible polyurethane foams,whose superiority is demonstrated in very low scorch, low volatility, excellent hydrolytic stability, low fogging and processing characteristics. Foams containing the product exhibit good compression set and IFD properties.

APP‐202 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐202 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

The product is a kind of high‐effective solid phosphite ester antioxidant, which is superior to other phosphite ester in the effective protection of polymers’ color.It is often blended with phenolic principal antioxidant (such as 1010) to prepare com‐posite antioxidant which improves the thermo‐stability of polymer processing, thus making it widely applied in PE, PP, PS, PA, PC, ABS and many other polymer materials.

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

APP‐204 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with Silicon according to own method. APP‐204 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP‐204 mainly use in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber, Paint, coating.

TBNPA is a reactive flame retardant containing appox. 73% aliphatic bromine. It combines a high bromine content with exceptional stability and is particularly suitable where thermal. hydrolytic and light stability are required. Major uses of it are as a reactive intermediate for high molecular weight flame retardants, particularly in combination with phosphorus. and as a reactive flame retardant for polyurethanes where its high solubi1ity in the system makes it especially useful. It reacts through its single hydroxyl function to form pendant urethane groups. Its high bromine content and good compatibility in CFC‐free PU systems enables high standards of fire retardancy to be reached together with good foam properties in both rigid and flexible PU.

TBPA Diol is a reactive fire redardant, this product is mainly used for rigid polyurethane foam,adhesion agent and paint.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

DLTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyehylene, polyvinyl chloride, ABS rubber and lubricating oil. It can be used in combination with phenolic antioxidants to produce synergistic effect, and to prolong the life of the final products.

Light stabilizer 791 is a synergistic mixture of Light stabilizer 944 and Light stabilizer 770. It is an excellent UV stabilizer especially for PP thick sections, which offers excellent surface protection. It also shows high stabilization efficiency in PP tapes. Light stabilizer 791 areas of application are PP, PP/EPDM and PP/PE/EPDM blend (TPO’s). Light stabilizer 791 is an excellent UV stabilizer for thick sections.The synergism between the high and low molecular weight HALS components of Light stabilizer 791guarantees maximum protection for the polymer against degradation from UV radiation and long‐term heat exposure.

AO 1098 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin and petroleum product, often used with DLTP for promoting the antioxidative effect.

LS 770 is recommended to be used in polypropylene, impact modified PP(TPO),EPDM, polystyrene ,impact polystyrene ABS,SAN,ASA and polyurethanes and is also effective in polyamides and polyacetals. LS 770 is a low molecular weight hindered amine light stabilizer that provides excellent light stability for thick sections and films in the recommended substrates. Benefits of using LS770 is the high light‐stabilizing performance, particularly in PP thick sections. It has broad compatibility and can be easily dispersed. The recommended concentrations range between 0.1% and 0.5%,depending on the substrate, processing conditions and application. The optimum level is substrate and application specific. Extensive performance data of LS 770 in various substrates and for various applications is available upon request.

TBP is a 2,4,6‐Tribromophenol that is is reactive and additive with good thermal stability. It was mainly used in epoxy resin and polyurethane etc.

TEP is a additive flame retardant. Use as fire‐retardant,strength agent of rubber,plastic and the material of pesticides,aging and steady agent of resin.

RDP is a halogen‐free phosphate ester flame retardant used in engineered resins, whose superiority is demonstrated in low volatility and high heat stability that that can tolerate high temperature processing required of many engineered resins. It can be recommended as flame retardant for PC/ABS, PPO/HIPS.

FR-245 is a brominated cyanurate is a proprietary, additive flame retardant. The combination of aromatic bromine and cyanurate provides high FR efficiency and good thermal stability. A major use in ABS and HIPS. It combines good UV, impact and flow properties. It is non blooming.

AO B225 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.