Products

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

HBCD is particularly suited for providing flame retardant to expanded polystyrene (EPS) foam, extruded polystyrene foam (XPS) and textile back coatings that are used extensively in the building and construction industry. HBCD additives exhibit high efficiency at low use levels while making building insulation and textiles flame resistant.

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

DOPO is used in plastics for electronics, circuit board, linear polyester, polyamide, epoxy resina and polyurethane.

BDP is a halogen‐free bisphosphate flame retardant used in engineered resins, and its superiority is demonstrated in low volatility, excellent hydrolytic stability, and high thermal stability that can tolerate high processing temperature required for engineered resins. It is recommended for use in PC/ABS, mPPO, epoxy resins .

AO 2246 is a high‐efficiency nonpolluting Antioxidant , applicable to the manufacture of synthetic rubber, latex and natural rubber, being one of excellent phenol Antioxidants. It is applicable to light colored or colored rubber product. In plastic industry, this product can prevent the thermal aging and light aging of polyester chlornamee,polystyrene,ABS resin, polyoxymethylene and cellulose resin with the dosage of 0.5‐1%.

TBBA is mainly used for epoxy resin, polycarbonate polyester, phenol resin, polyurethane etc. also use for polystyrene, ABS,unsaturated polyester a flame ‐retardant‐additive.

APP‐201 is a fine‐particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

TCEP can be used as fire retardant for PVC, soft or hard foam polyurethane, cellulose acetate, ethyl cellulose paint, flame‐resisting rubber & rubber conveyer belt. Besides self‐extinguishing character, it can impove other performances of product, such as water proof, element resistance, antistatic performance, soft feeling. It can also be used as special pressure additives for lube, gasoline additives and heat cooling agent of magnesium.

TBPA is used in polyester, unsaturated polyester, epoxy resin, as a reactive flame‐retardant; used in polystyrene, polypropylene, polyethylene and ABS resin, as a additive flame retardant; used in various engineering plastics to resist burning based on its excellent thermal stability.

CEPPA is one kind of environment‐friendly fire retardant, it can be used permanent flame retarding modification of polyester, and the spinnability of flame retarding polyester is similar to PET, thus it can be used in all kinds of spinning system, with features as excellent thermal stability, no decompound during spinning and no smell. It can be used in all the application fields of PET to improve antistatic capacity of polyester. The dosage for copolymerization of PTA and EG is 2.5~4.5%, the phosphorus assay of flame retarding polyester sheet is 0.35‐0.60%, and the LOI of flame retarding products is 30~36%.

TBBP-DBPE is mainly used in PP, PE, PS and ABS.

AO 1024 possesses the double structures of hindered phenol and acyl，and afunction of anti‐oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self‐oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1‐0.5 share.

TCP is an additive flame retardant plasticizer used in flexible polyurethane foams, whose superiority is demonstrated in excellent hydrolysis stability, good electric insulation performance, superior mildew resistance and abrasion resistance. It can be recommended as flame retardant for synthetic rubber, PVC, polyester, polyolefin, and plasticizer or flame retardant plasticizer for vinyl resin, nitrocellulose, butyl rubber and chloroprene rubber.

BDDP is mainly used for plastics as flame‐retardant, widely for PP,PE,PS,ABS resin rubber fiber etc high molecular material and electronic industry. Especially for PP Plastics. It is the most excellent flame‐retardant for PP Plastics to now.

FR‐690 is a chlorinated phosphate flame retardant used in rigid and flexible polyurethane foams, whose superiority is demonstrated in good stability. It can readily be used to meet the fire safety standards such as California TB 117, FMVSS 302, UL94 HF 1, British BS 5852, DIN 75200 and CSE RF4 Class 1.

APP‐205 is a non‐halogenated flame retardant based on APP‐201 which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. APP‐205 differs in its mode of action from chlorineor bromine‐containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat‐insulating effect, reduces fur‐ther oxygen access and prevents dripping of the thermoplastic. APP‐205 may be used in poly‐propylene, PP‐copolymers and PP‐blends.

AO B215 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

FR‐HF‐4 is an additive flame retardant used in flexible polyurethane foams,whose superiority is demonstrated in very low scorch, low volatility, excellent hydrolytic stability, low fogging and processing characteristics. Foams containing the product exhibit good compression set and IFD properties.

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

IPPP35 is halogen‐free flame retardant phosphate ester plasticizer, the two will not pollute the environment; in the viscosity of the phosphate species is the lowest, the highest phosphorus content of a model. This product is colorless and transparent, good compatibility, but also by both flame‐retardant plastic, flame retardant and plasticized material in between play a balancing role, so raw materials can change their character and physical properties, widely for fabric coating, circuit boards, flooring, textiles, PVC, phenolic resin, and other fields.

LS 622 is a hindered amine light stabilizer. It is used in light aging inhibition of polyethylene, polypropylene, polyurethane, metaformaldehyde, polyamine and polyester, also in ABS and engineering plastics.

AO 702 is an important phenolic antioxidant, which is mainly used for plastics, natural and synthetic rubber, and usually used as oils additives. With the excellent performance on high‐temperature antioxidation, it finds many applications in oil products serving under high temperature like heat conduction oil, quench oil and special lubricant.

FR-680 is an outstanding flame retardant for HIPS, ABS, polycarbonate, thermoplastic, elastomers, unsaturated polyesters, adhesives, coatings, and textiles. And it is especially efficient for applications in which thermal stability at high processing temperatures is important.

DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene,polyvinyl chloride, ABS rubber and lubricating oil. It has high‐melting and low‐volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect.

TBE is a reactive flame‐retardant, mainly used in foamed polystyrene, unsaturated polyester, foamed polyester and the like to resist burning, also used together with Hexabromocyclododecane, having a synergistic effect.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.

APP‐204 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with Silicon according to own method. APP‐204 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP‐204 mainly use in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber, Paint, coating.

DBDPE is used in high‐impact polystyrene,engineering plastics,wires and cables,insulator,elastomer and thermoset plastics etc. HIPS, PE, PP, ABS, PBT, UPE, Epoxy.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

Zinc Borate 35 is one multi‐functional synergistic flame retardant with Antimony Oxide etc additives in polymers to improve flame retardant performance, it can reduce smoke evolution and adjust the balance of flame retardant properties versus mechanical, electrical and other properties. Zinc Borate 35 is widely used in PVC applications such as carpet, conveyor belt, wire and cable, and in Nylon, PE, PP, epoxy, polyesters, thermoplastic elastomers and rubbers . plastics of halogen free flame retardant systems based on Al(OH)3 and Mg(OH)3, intumescent coating and painting, ceramic glaze, milk glass, decorative paper etc fields. Zinc Borate is also used in wood composite as fungicide to prevent from decay fungi and subterranean termites . ZB200 grade's particle size is the smallest, it is recommended to wire and cable applications that need much fine particle size fields.

RDP is a halogen‐free phosphate ester flame retardant used in engineered resins, whose superiority is demonstrated in low volatility and high heat stability that that can tolerate high temperature processing required of many engineered resins. It can be recommended as flame retardant for PC/ABS, PPO/HIPS.

DBDPO is a kind of broad‐spectrum,high efficiency fire retardant with the features of low additive quantity. It is widely used rubber,textile,electronic,plastic industry etc.Especially used in HIPS,PE,PP,ABS,PBT,UPE, Epoxy,Nylon6, Textiles etc.

AO 1098 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin and petroleum product, often used with DLTP for promoting the antioxidative effect.

Light stabilizer 791 is a synergistic mixture of Light stabilizer 944 and Light stabilizer 770. It is an excellent UV stabilizer especially for PP thick sections, which offers excellent surface protection. It also shows high stabilization efficiency in PP tapes. Light stabilizer 791 areas of application are PP, PP/EPDM and PP/PE/EPDM blend (TPO’s). Light stabilizer 791 is an excellent UV stabilizer for thick sections.The synergism between the high and low molecular weight HALS components of Light stabilizer 791guarantees maximum protection for the polymer against degradation from UV radiation and long‐term heat exposure.