Knowde Enhanced TDS
Identification & Functionality
- Animal Feed & Nutrition Functions
- Technologies
Features & Benefits
- Product Information
High expansion biodegradable marking foam suitable for all foam marking systems.
- General Information
Synergy Foam is a high performance spray marking foam suitable for a wide range of applications. It has excellent expansion performance and is long lasting even in hot weather. It is nonflammable and fully biodegradable.
Applications & Uses
- Markets
- Spillage
Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water and detergent, and absorb with further inert material. Dispose of safely to a suitable landfill.
- Rates of Application
Situation Use Rate Comments Soft – Warm Water 1.0 – 1.5 liters / 100 liters Half fill the foam generating tank with water. Add required Synergy Foamer liquid. Place a hose in the tank below the water line and top up to fill tank. Ensure good mixing. Hard – Cold Water 1.5 – 2.0 liters / 100 liters Hot Weather +32ºC 1.5 – 2.0 liters / 100 liters - Factors Affecting Performance
Water quality: Foaming agents can typically lose up to 40% of foam quality if hard water is used. The use of soft or rainwater in these situations is preferred. Bright Sunlight: Bright sunlight will increase soil surface temperature particularly on dark soils. High soil temperatures will reduce the time the foam remains stable. Water temperature: Water temperatures of below 10ºC will reduce the foam volume. It is advised to add hot water if necessary to increase foam tank water temperature. Solution Storage: Foaming ability will reduce after 48 hours. It is preferable to replace the foam solution every 24 hours. Air temperature: If air temperature falls towards 5ºC foam volume and quality can deteriorate. Under these conditions it is recommended to reduce air pressure or warm the tank water. Active Ingredients: Greater than 30% sodium lauryl ether sulfate, and 0.2% formaldehyde as a preservative.
Properties
- Physical Form
Safety & Health
- Precautions
STORAGE: Keep out of reach of children. Store in the original container in a secure place. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves, and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. DISPOSAL: Dispose of this product only by using in accordance with this label. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Do not allow spray drift outside the target area to occur.
Packaging & Availability
- Packaging Type